powerpc: C29X: Move CONFIG_PPC_C29X to Kconfig option

Replace CONFIG_PPC_C29X with ARCH_C29X in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
8 years ago · 4fd64746b0
parent a202b9f802
commit 4fd64746b0
9 changed files with 15 additions and 16 deletions
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@ -33,6 +33,7 @@ config TARGET_BSC9132QDS

 config TARGET_C29XPCIE
 	bool "Support C29XPCIE"
+	select ARCH_C29X
 	select SUPPORT_SPL
 	select SUPPORT_TPL
 	select PHYS_64BIT
@ -185,6 +186,9 @@ config ARCH_BSC9131
 config ARCH_BSC9132
 	bool

+config ARCH_C29X
+	bool
+
 config ARCH_MPC8544
 	bool

--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@ -65,7 +65,7 @@ obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
 obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o

 # SoC specific SERDES support
-obj-$(CONFIG_PPC_C29X)	+= c29x_serdes.o
+obj-$(CONFIG_ARCH_C29X)	+= c29x_serdes.o
 obj-$(CONFIG_MPC8536) += mpc8536_serdes.o
 obj-$(CONFIG_ARCH_MPC8544) += mpc8544_serdes.o
 obj-$(CONFIG_ARCH_MPC8548) += mpc8548_serdes.o
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@ -959,7 +959,7 @@ int cpu_init_r(void)
 #ifdef CONFIG_FSL_CAAM
 	sec_init();

-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
 	if ((SVR_SOC_VER(svr) == SVR_C292) ||
 	    (SVR_SOC_VER(svr) == SVR_C293))
 		sec_init_idx(1);
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@ -914,7 +914,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define CONFIG_SYS_FSL_SFP_VER_3_0


-#elif defined(CONFIG_PPC_C29X)
+#elif defined(CONFIG_ARCH_C29X)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_FSL_SDHC_V2_3
 #define CONFIG_SYS_FSL_NUM_LAWS		12
@ -955,7 +955,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define CONFIG_SYS_FSL_DDRC_GEN3
 #endif

-#if !defined(CONFIG_PPC_C29X)
+#if !defined(CONFIG_ARCH_C29X)
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
 #endif

--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@ -2123,7 +2123,7 @@ typedef struct ccsr_gur {
 #ifdef CONFIG_MPC8536
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
-#elif defined(CONFIG_PPC_C29X)
+#elif defined(CONFIG_ARCH_C29X)
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x00003f00
 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	(9 - ((gur->pordevsr2 \
 					& MPC85xx_PORDEVSR2_DDR_SPD_0) \
@ -2175,7 +2175,7 @@ typedef struct ccsr_gur {
 #elif defined(CONFIG_ARCH_BSC9132)
 #define MPC85xx_PORDEVSR_IO_SEL		0x00FE0000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	17
-#elif defined(CONFIG_PPC_C29X)
+#elif defined(CONFIG_ARCH_C29X)
 #define MPC85xx_PORDEVSR_IO_SEL		0x00e00000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	21
 #else
@ -2193,7 +2193,7 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORDEVSR_RIO_DEV_ID	0x00000007
 	u32	pordbgmsr;	/* POR debug mode status */
 	u32	pordevsr2;	/* POR I/O device status 2 */
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
 #define MPC85xx_PORDEVSR2_DDR_SPD_0	0x00000008
 #define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT	3
 #endif
@ -2344,7 +2344,7 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR0_SIM_SEL_MASK	0x0003b000
 #define MPC85xx_PMUXCR0_SIM_SEL		0x00014000
 #endif
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
 #define MPC85xx_PMUXCR_SPI_MASK			0x00000300
 #define MPC85xx_PMUXCR_SPI			0x00000000
 #define MPC85xx_PMUXCR_SPI_GPIO			0x00000100
@ -2964,7 +2964,7 @@ struct ccsr_pman {
 #endif
 #define CONFIG_SYS_MDIO1_OFFSET			0x24000
 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET		0x2e000
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x80000
 #define CONFIG_SYS_FSL_JR0_OFFSET               0x81000
 #else
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@ -21,7 +21,7 @@

 uint32_t sec_offset[CONFIG_SYS_FSL_MAX_NUM_OF_SEC] = {
 	0,
-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
 	CONFIG_SYS_FSL_SEC_IDX_OFFSET,
 	2 * CONFIG_SYS_FSL_SEC_IDX_OFFSET
 #endif
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@ -11,10 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H

-#ifdef CONFIG_C29XPCIE
-#define CONFIG_PPC_C29X
-#endif
-
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_TEXT_BASE		0x11000000
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@ -303,7 +303,7 @@ struct sg_entry {
 */
 int blob_dek(const u8 *src, u8 *dst, u8 len);

-#if defined(CONFIG_PPC_C29X)
+#if defined(CONFIG_ARCH_C29X)
 int sec_init_idx(uint8_t);
 #endif
 int sec_init(void);
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@ -3682,7 +3682,6 @@ CONFIG_PPC4xx_EMAC
 CONFIG_PPC64BRIDGE
 CONFIG_PPC_B4420
 CONFIG_PPC_B4860
-CONFIG_PPC_C29X
 CONFIG_PPC_CLUSTER_START
 CONFIG_PPC_P2041
 CONFIG_PPC_P3041