From 511fc86d0b1b603532056c663c22b91056908755 Mon Sep 17 00:00:00 2001 From: Ruchika Gupta Date: Mon, 17 Apr 2017 18:07:19 +0530 Subject: [PATCH] arm: ls1046ardb: Add SD secure boot target - Add SD secure boot target for ls1046ardb. - Change the u-boot size defined by a macro for copying the main U-Boot by SPL to also include the u-boot Secure Boot header size as header is appended to u-boot image. So header will also be copied from SD to DDR. - CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM (128K) where 32K are reserved for use by boot ROM and 6K for the header. - Reduce the size of CAAM driver for SPL Blobification functions and descriptors, that are not required at the time of SPL are disabled. Further error code conversion to strings is disabled for SPL build. Signed-off-by: Vinitha Pillai Signed-off-by: Sumit Garg Signed-off-by: Ruchika Gupta Reviewed-by: York Sun --- arch/arm/include/asm/fsl_secure_boot.h | 2 +- board/freescale/ls1046ardb/MAINTAINERS | 6 ++++ configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 45 +++++++++++++++++++++++++ drivers/crypto/fsl/jobdesc.c | 4 +-- drivers/crypto/fsl/jr.c | 19 ++++++----- include/configs/ls1046a_common.h | 16 +++++++-- 6 files changed, 78 insertions(+), 14 deletions(-) create mode 100644 configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 1fd09f2..7bff8b7 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -88,7 +88,7 @@ /* For SD boot address and size are assigned in terms of sector * offset and no. of sectors respectively. */ -#if defined(CONFIG_LS1043A) +#if defined(CONFIG_LS1043A) || defined(CONFIG_ARCH_LS1046A) #define CONFIG_BS_HDR_ADDR_DEVICE 0x00000920 #else #define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 diff --git a/board/freescale/ls1046ardb/MAINTAINERS b/board/freescale/ls1046ardb/MAINTAINERS index 758ff9d..79a2290 100644 --- a/board/freescale/ls1046ardb/MAINTAINERS +++ b/board/freescale/ls1046ardb/MAINTAINERS @@ -8,6 +8,12 @@ F: configs/ls1046ardb_qspi_defconfig F: configs/ls1046ardb_sdcard_defconfig F: configs/ls1046ardb_emmc_defconfig +LS1046A_SECURE_BOOT BOARD +M: Ruchika Gupta +S: Maintained +F: configs/ls1046ardb_SECURE_BOOT_defconfig +F: configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig + M: Sumit Garg S: Maintained F: configs/ls1046ardb_qspi_SECURE_BOOT_defconfig diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig new file mode 100644 index 0000000..a41ec80 --- /dev/null +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -0,0 +1,45 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046ARDB=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" +CONFIG_SECURE_BOOT=y +CONFIG_SD_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_RSA=y +CONFIG_SPL_RSA=y +CONFIG_SPL_CRYPTO_SUPPORT=y +CONFIG_SPL_HASH_SUPPORT=y diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index 6125bbb..375ff9d 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -204,7 +204,7 @@ void inline_cnstr_jobdesc_hash(uint32_t *desc, append_store(desc, dma_addr_out, storelen, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT); } - +#ifndef CONFIG_SPL_BUILD void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, uint8_t *plain_txt, uint8_t *enc_blob, uint32_t in_sz) @@ -252,7 +252,7 @@ void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr, append_operation(desc, OP_TYPE_DECAP_PROTOCOL | OP_PCLID_BLOB); } - +#endif /* * Descriptor to instantiate RNG State Handle 0 in normal mode and * load the JDKEK, TDKEK and TDSK registers diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index 1b88229..163e729 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -342,7 +342,9 @@ static void desc_done(uint32_t status, void *arg) { struct result *x = arg; x->status = status; +#ifndef CONFIG_SPL_BUILD caam_jr_strstatus(status); +#endif x->done = 1; } @@ -436,7 +438,11 @@ static inline int sec_reset_idx(uint8_t sec_idx) return 0; } - +int sec_reset(void) +{ + return sec_reset_idx(0); +} +#ifndef CONFIG_SPL_BUILD static int instantiate_rng(uint8_t sec_idx) { struct result op; @@ -472,11 +478,6 @@ static int instantiate_rng(uint8_t sec_idx) return ret; } -int sec_reset(void) -{ - return sec_reset_idx(0); -} - static u8 get_rng_vid(uint8_t sec_idx) { ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx); @@ -561,7 +562,7 @@ static int rng_init(uint8_t sec_idx) return ret; } - +#endif int sec_init_idx(uint8_t sec_idx) { ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx); @@ -634,7 +635,7 @@ int sec_init_idx(uint8_t sec_idx) pamu_enable(); #endif - +#ifndef CONFIG_SPL_BUILD if (get_rng_vid(sec_idx) >= 4) { if (rng_init(sec_idx) < 0) { printf("SEC%u: RNG instantiation failed\n", sec_idx); @@ -642,7 +643,7 @@ int sec_init_idx(uint8_t sec_idx) } printf("SEC%u: RNG instantiated\n", sec_idx); } - +#endif return ret; } diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 164a5f3..957ffd3 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -85,7 +85,19 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SYS_MONITOR_LEN 0xa0000 + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. Here u-boot max. size is 512K. So if binary + * size increases then increase this size in case of secure boot as + * it uses raw u-boot image instead of fit image. + */ +#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) +#else +#define CONFIG_SYS_MONITOR_LEN 0x100000 +#endif /* ifdef CONFIG_SECURE_BOOT */ #endif /* NAND SPL */ @@ -105,7 +117,7 @@ #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000 -#define CONFIG_SPL_MAX_SIZE 0x1d000 /* 116 KiB */ +#define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */ #define CONFIG_SPL_STACK 0x1001f000 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE