Kconfig: Drop CONFIG_CMD_DS4510_INFO

This option is only used in one driver and two boards. It does not seem
worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

README

@@ -831,7 +831,6 @@ The following options need to be configured:
 		CONFIG_CMD_DHCP		* DHCP support
 		CONFIG_CMD_DIAG		* Diagnostics
 		CONFIG_CMD_DS4510	* ds4510 I2C gpio commands
-		CONFIG_CMD_DS4510_INFO	* ds4510 I2C info command
 		CONFIG_CMD_DS4510_MEM	* ds4510 I2C eeprom/sram commansd
 		CONFIG_CMD_DS4510_RST	* ds4510 I2C rst command
 		CONFIG_CMD_DTT		* Digital Therm and Thermostat

drivers/misc/ds4510.c

@@ -186,7 +186,6 @@ int ds4510_gpio_read_val(uint8_t chip)
 }
 
 #ifdef CONFIG_CMD_DS4510
-#ifdef CONFIG_CMD_DS4510_INFO
 /*
  * Display DS4510 information
  */
@@ -240,7 +239,6 @@ static int ds4510_info(uint8_t chip)
 
 	return 0;
 }
-#endif /* CONFIG_CMD_DS4510_INFO */
 
 cmd_tbl_t cmd_ds4510[] = {
 	U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""),
@@ -248,9 +246,7 @@ cmd_tbl_t cmd_ds4510[] = {
 	U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""),
 	U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""),
 	U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""),
-#ifdef CONFIG_CMD_DS4510_INFO
 	U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""),
-#endif
 #ifdef CONFIG_CMD_DS4510_RST
 	U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""),
 #endif
@@ -324,10 +320,8 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		else
 			tmp &= ~(1 << ul_arg2);
 		return ds4510_pullup_write(chip, tmp);
-#ifdef CONFIG_CMD_DS4510_INFO
 	case DS4510_CMD_INFO:
 		return ds4510_info(chip);
-#endif
 #ifdef CONFIG_CMD_DS4510_RST
 	case DS4510_CMD_RSTDELAY:
 		return ds4510_rstdelay_write(chip, ul_arg2);
@@ -378,10 +372,8 @@ U_BOOT_CMD(
 	"ds4510 eeprom/seeprom/sram/gpio access",
 	"device [dev]\n"
 	"	- show or set current device address\n"
-#ifdef CONFIG_CMD_DS4510_INFO
 	"ds4510 info\n"
 	"	- display ds4510 info\n"
-#endif
 	"ds4510 output pin 0|1\n"
 	"	- set pin low or high-Z\n"
 	"ds4510 input pin\n"

include/configs/xpedite517x.h

@@ -503,7 +503,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Command configuration.
  */
 #define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IRQ

include/configs/xpedite537x.h

@@ -355,7 +355,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Command configuration.
  */
 #define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2

scripts/config_whitelist.txt

@@ -384,7 +384,6 @@ CONFIG_CMDLINE_EDITING
 CONFIG_CMDLINE_PS_SUPPORT
 CONFIG_CMDLINE_TAG
 CONFIG_CMD_DS4510
-CONFIG_CMD_DS4510_INFO
 CONFIG_CMD_DS4510_MEM
 CONFIG_CMD_DS4510_RST
 CONFIG_CMD_DTT