From 4ccd5510e50b5675227a1fe0e5ca099d333f637d Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 29 Jun 2010 01:33:35 +0200 Subject: [PATCH 01/14] MPC512x: workaround data corruption for unaligned local bus accesses Commit 460c2ce3 "MPC5200: workaround data corruption for unaligned local bus accesses" fixed the problem for MPC5200 only, but MPC512x is affected as well, so apply the same fix here, too. Signed-off-by: Wolfgang Denk Cc: Detlev Zundel Cc: Anatolij Gustschin Acked-by: Detlev Zundel --- arch/powerpc/cpu/mpc5xxx/Makefile | 5 ----- arch/powerpc/lib/Makefile | 16 ++++++++++++---- arch/powerpc/{cpu/mpc5xxx => lib}/memcpy_mpc5200.c | 0 3 files changed, 12 insertions(+), 9 deletions(-) rename arch/powerpc/{cpu/mpc5xxx => lib}/memcpy_mpc5200.c (100%) diff --git a/arch/powerpc/cpu/mpc5xxx/Makefile b/arch/powerpc/cpu/mpc5xxx/Makefile index 4ab2b7b..0ee0611 100644 --- a/arch/powerpc/cpu/mpc5xxx/Makefile +++ b/arch/powerpc/cpu/mpc5xxx/Makefile @@ -30,11 +30,6 @@ SOBJS = io.o firmware_sc_task_bestcomm.impl.o COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o -# Workaround for local bus unaligned access problem on MPC5200 -#ifdef CONFIG_MPC5200 -COBJS += memcpy_mpc5200.o -#endif - SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) START := $(addprefix $(obj),$(START)) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index bf23790..2065b6d 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -40,14 +40,22 @@ COBJS-y += interrupts.o COBJS-$(CONFIG_CMD_KGDB) += kgdb.o COBJS-y += time.o -SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) - -# Workaround for local bus unaligned access problem on MPC5200 +# Workaround for local bus unaligned access problems +# on MPC512x and MPC5200 +ifdef CONFIG_MPC512X +$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy +COBJS-y += memcpy_mpc5200.o +endif ifdef CONFIG_MPC5200 $(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy +COBJS-y += memcpy_mpc5200.o endif +COBJS += $(sort $(COBJS-y)) + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + $(LIB): $(obj).depend $(OBJS) @if ! $(CROSS_COMPILE)readelf -S $(OBJS) | grep -q '\.fixup.*PROGBITS';\ then \ diff --git a/arch/powerpc/cpu/mpc5xxx/memcpy_mpc5200.c b/arch/powerpc/lib/memcpy_mpc5200.c similarity index 100% rename from arch/powerpc/cpu/mpc5xxx/memcpy_mpc5200.c rename to arch/powerpc/lib/memcpy_mpc5200.c From cdc6363f423900645265563d705a0a5a964ae40c Mon Sep 17 00:00:00 2001 From: Poonam Aggrwal Date: Wed, 23 Jun 2010 19:42:07 +0530 Subject: [PATCH 02/14] 85xx/p1_p2_rdb: not able to modify "$bootfile" environment variable Because the variable was getting defined twice. Signed-off-by: Poonam Aggrwal Acked-by: Andy Fleming --- include/configs/P1_P2_RDB.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index a9b4004..125911f 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -568,7 +568,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "loadaddr=1000000\0" \ - "bootfile=uImage\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ "erase " MK_STR(TEXT_BASE) " +$filesize; " \ From d3bee08332fbc9cc5b6dc22ecd34050a85d44d0a Mon Sep 17 00:00:00 2001 From: Poonam Aggrwal Date: Wed, 23 Jun 2010 19:32:28 +0530 Subject: [PATCH 03/14] 85xx/p1_p2_rdb: Modify the CLK_CTRL value for DDR at 667MHz Use a slighly larger value of CLK_CTRL for DDR at 667MHz which fixes random crashes while linux booting. Applicable for both NAND and NOR boot. Signed-off-by: Sandeep Gopalpet Signed-off-by: Poonam Aggrwal Acked-by: Andy Fleming --- board/freescale/p1_p2_rdb/ddr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index fccc4f8..15b46b0 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -76,7 +76,7 @@ extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, #define CONFIG_SYS_DDR_TIMING_0_667 0x55770802 #define CONFIG_SYS_DDR_TIMING_1_667 0x5f599543 #define CONFIG_SYS_DDR_TIMING_2_667 0x0fa074d1 -#define CONFIG_SYS_DDR_CLK_CTRL_667 0x02800000 +#define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 #define CONFIG_SYS_DDR_MODE_1_667 0x00040852 #define CONFIG_SYS_DDR_MODE_2_667 0x00000000 #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280100 From 90b5bf211b85eee10c34cbeb907ce381142b7c99 Mon Sep 17 00:00:00 2001 From: Felix Radensky Date: Mon, 28 Jun 2010 01:57:39 +0300 Subject: [PATCH 04/14] tsec: Fix eTSEC2 link problem on P2020RDB On P2020RDB eTSEC2 is connected to Vitesse VSC8221 PHY via SGMII. Current TBI PHY settings for SGMII mode cause link problems on this platform, link never comes up. Fix this by making TBI PHY settings configurable and add a working configuration for P2020RDB. Signed-off-by: Felix Radensky Acked-by: Andy Fleming --- drivers/net/tsec.c | 6 +++++- include/configs/P1_P2_RDB.h | 9 +++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 3e4c3bd..5fa6f61 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -281,12 +281,16 @@ static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, | TBIANA_FULL_DUPLEX \ ) -/* Force the TBI PHY into 1000Mbps full duplex when in SGMII mode */ +/* By default force the TBI PHY into 1000Mbps full duplex when in SGMII mode */ +#ifndef CONFIG_TSEC_TBICR_SETTINGS #define TBICR_SETTINGS ( \ TBICR_PHY_RESET \ | TBICR_FULL_DUPLEX \ | TBICR_SPEED1_SET \ ) +#else +#define TBICR_SETTINGS CONFIG_TSEC_TBICR_SETTINGS +#endif /* CONFIG_TSEC_TBICR_SETTINGS */ /* Configure the TBI for SGMII operation */ static void tsec_configure_serdes(struct tsec_private *priv) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 125911f..b891730 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -425,6 +425,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ETHPRIME "eTSEC1" #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +/* TBI PHY configuration for SGMII mode */ +#define CONFIG_TSEC_TBICR_SETTINGS ( \ + TBICR_PHY_RESET \ + | TBICR_ANEG_ENABLE \ + | TBICR_FULL_DUPLEX \ + | TBICR_SPEED1_SET \ + ) + #endif /* CONFIG_TSEC_ENET */ /* From 75997dc54f4ddbc4e9ed5dcebbe79951aa7128d1 Mon Sep 17 00:00:00 2001 From: Poonam Aggrwal Date: Tue, 22 Jun 2010 12:50:46 +0530 Subject: [PATCH 05/14] 85xx/p1_p2_rdb: Added RevD board version support - Also modified the code to use io accessors. Signed-off-by: Poonam Aggrwal Signed-off-by: Dipen Dudhat Acked-by: Kumar Gala --- board/freescale/p1_p2_rdb/p1_p2_rdb.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 31cdf9a..fae31f2 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -54,6 +54,7 @@ DECLARE_GLOBAL_DATA_PTR; #define BOARDREV_MASK 0x10100000 #define BOARDREV_B 0x10100000 #define BOARDREV_C 0x00100000 +#define BOARDREV_D 0x00000000 #define SYSCLK_66 66666666 #define SYSCLK_50 50000000 @@ -64,7 +65,7 @@ unsigned long get_board_sys_clk(ulong dummy) volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); u32 val_gpdat, sysclk_gpio, board_rev_gpio; - val_gpdat = pgpio->gpdat; + val_gpdat = in_be32(&pgpio->gpdat); sysclk_gpio = val_gpdat & SYSCLK_MASK; board_rev_gpio = val_gpdat & BOARDREV_MASK; if (board_rev_gpio == BOARDREV_C) { @@ -77,6 +78,11 @@ unsigned long get_board_sys_clk(ulong dummy) return SYSCLK_66; else return SYSCLK_50; + } else if (board_rev_gpio == BOARDREV_D) { + if(sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; } return 0; } @@ -100,12 +106,14 @@ int checkboard (void) char board_rev = 0; struct cpu_type *cpu; - val_gpdat = pgpio->gpdat; + val_gpdat = in_be32(&pgpio->gpdat); board_rev_gpio = val_gpdat & BOARDREV_MASK; if (board_rev_gpio == BOARDREV_C) board_rev = 'C'; else if (board_rev_gpio == BOARDREV_B) board_rev = 'B'; + else if (board_rev_gpio == BOARDREV_D) + board_rev = 'D'; else panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio); @@ -159,6 +167,7 @@ int board_eth_init(bd_t *bis) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; char *tmp; + u32 pordevsr; unsigned int vscfw_addr; #ifdef CONFIG_TSEC1 @@ -171,7 +180,8 @@ int board_eth_init(bd_t *bis) #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + pordevsr = in_be32(&gur->pordevsr); + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) tsec_info[num].flags |= TSEC_SGMII; num++; #endif From 1f9d10f694f6f901a826a5b42fbfe914e2117971 Mon Sep 17 00:00:00 2001 From: Remy Bohmer Date: Thu, 17 Jun 2010 21:17:08 +0200 Subject: [PATCH 06/14] Fix console_buffer size conflict error. The console_buffer size is declared in common/main.c as -- char console_buffer[CONFIG_SYS_CBSIZE + 1]; so this extern definition is wrong. Signed-off-by: Remy Bohmer --- common/hush.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/hush.c b/common/hush.c index 06c5ff8..9eea90f 100644 --- a/common/hush.c +++ b/common/hush.c @@ -1018,7 +1018,7 @@ static void get_user_input(struct in_str *i) fflush(stdout); i->p = the_command; #else - extern char console_buffer[CONFIG_SYS_CBSIZE]; + extern char console_buffer[]; int n; static char the_command[CONFIG_SYS_CBSIZE]; From c987f4753b0afadb38acd7e61df7ba11e8a0203f Mon Sep 17 00:00:00 2001 From: Felix Radensky Date: Mon, 28 Jun 2010 01:57:39 +0300 Subject: [PATCH 07/14] tsec: Fix eTSEC2 link problem on P2020RDB On P2020RDB eTSEC2 is connected to Vitesse VSC8221 PHY via SGMII. Current TBI PHY settings for SGMII mode cause link problems on this platform, link never comes up. Fix this by making TBI PHY settings configurable and add a working configuration for P2020RDB. Signed-off-by: Felix Radensky Acked-by: Andy Fleming Acked-by: Peter Tyser Tested-by: Peter Tyser --- drivers/net/tsec.c | 6 +++++- include/configs/P1_P2_RDB.h | 9 +++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 3e4c3bd..5fa6f61 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -281,12 +281,16 @@ static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, | TBIANA_FULL_DUPLEX \ ) -/* Force the TBI PHY into 1000Mbps full duplex when in SGMII mode */ +/* By default force the TBI PHY into 1000Mbps full duplex when in SGMII mode */ +#ifndef CONFIG_TSEC_TBICR_SETTINGS #define TBICR_SETTINGS ( \ TBICR_PHY_RESET \ | TBICR_FULL_DUPLEX \ | TBICR_SPEED1_SET \ ) +#else +#define TBICR_SETTINGS CONFIG_TSEC_TBICR_SETTINGS +#endif /* CONFIG_TSEC_TBICR_SETTINGS */ /* Configure the TBI for SGMII operation */ static void tsec_configure_serdes(struct tsec_private *priv) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 125911f..b891730 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -425,6 +425,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ETHPRIME "eTSEC1" #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +/* TBI PHY configuration for SGMII mode */ +#define CONFIG_TSEC_TBICR_SETTINGS ( \ + TBICR_PHY_RESET \ + | TBICR_ANEG_ENABLE \ + | TBICR_FULL_DUPLEX \ + | TBICR_SPEED1_SET \ + ) + #endif /* CONFIG_TSEC_ENET */ /* From 38c38c344c200ee90cfd243671473c449b6f0815 Mon Sep 17 00:00:00 2001 From: Poonam Aggrwal Date: Tue, 22 Jun 2010 12:50:46 +0530 Subject: [PATCH 08/14] 85xx/p1_p2_rdb: Added RevD board version support - Also modified the code to use io accessors. Signed-off-by: Poonam Aggrwal Signed-off-by: Dipen Dudhat Acked-by: Kumar Gala --- board/freescale/p1_p2_rdb/p1_p2_rdb.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 31cdf9a..fae31f2 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -54,6 +54,7 @@ DECLARE_GLOBAL_DATA_PTR; #define BOARDREV_MASK 0x10100000 #define BOARDREV_B 0x10100000 #define BOARDREV_C 0x00100000 +#define BOARDREV_D 0x00000000 #define SYSCLK_66 66666666 #define SYSCLK_50 50000000 @@ -64,7 +65,7 @@ unsigned long get_board_sys_clk(ulong dummy) volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); u32 val_gpdat, sysclk_gpio, board_rev_gpio; - val_gpdat = pgpio->gpdat; + val_gpdat = in_be32(&pgpio->gpdat); sysclk_gpio = val_gpdat & SYSCLK_MASK; board_rev_gpio = val_gpdat & BOARDREV_MASK; if (board_rev_gpio == BOARDREV_C) { @@ -77,6 +78,11 @@ unsigned long get_board_sys_clk(ulong dummy) return SYSCLK_66; else return SYSCLK_50; + } else if (board_rev_gpio == BOARDREV_D) { + if(sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; } return 0; } @@ -100,12 +106,14 @@ int checkboard (void) char board_rev = 0; struct cpu_type *cpu; - val_gpdat = pgpio->gpdat; + val_gpdat = in_be32(&pgpio->gpdat); board_rev_gpio = val_gpdat & BOARDREV_MASK; if (board_rev_gpio == BOARDREV_C) board_rev = 'C'; else if (board_rev_gpio == BOARDREV_B) board_rev = 'B'; + else if (board_rev_gpio == BOARDREV_D) + board_rev = 'D'; else panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio); @@ -159,6 +167,7 @@ int board_eth_init(bd_t *bis) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; char *tmp; + u32 pordevsr; unsigned int vscfw_addr; #ifdef CONFIG_TSEC1 @@ -171,7 +180,8 @@ int board_eth_init(bd_t *bis) #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + pordevsr = in_be32(&gur->pordevsr); + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) tsec_info[num].flags |= TSEC_SGMII; num++; #endif From 0d7f4abcf6bbef06504c82e03f11054468262430 Mon Sep 17 00:00:00 2001 From: Remy Bohmer Date: Thu, 17 Jun 2010 21:17:08 +0200 Subject: [PATCH 09/14] Fix console_buffer size conflict error. The console_buffer size is declared in common/main.c as -- char console_buffer[CONFIG_SYS_CBSIZE + 1]; so this extern definition is wrong. Signed-off-by: Remy Bohmer --- common/hush.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/hush.c b/common/hush.c index 06c5ff8..9eea90f 100644 --- a/common/hush.c +++ b/common/hush.c @@ -1018,7 +1018,7 @@ static void get_user_input(struct in_str *i) fflush(stdout); i->p = the_command; #else - extern char console_buffer[CONFIG_SYS_CBSIZE]; + extern char console_buffer[]; int n; static char the_command[CONFIG_SYS_CBSIZE]; From 9fb3b5085787baad8a133e347ad12c5b3a022e98 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 28 Jun 2010 22:44:49 +0400 Subject: [PATCH 10/14] EHCI: zero out QH transfer overlay in ehci_submit_async() ehci_submit_async() doesn't really zero out the QH transfer overlay (as the EHCI specification suggests) which leads to the controller seeing the "token" field as the previous call has left it, i.e.: - if a timeout occured on the previous call (Active bit left as 1), controller incorrectly tries to complete a previous transaction on a newly programmed endpoint; - if a halt occured on the previous call (Halted bit set to 1), controller just ignores the newly programmed TD(s) and the function then keeps returning error ad infinitum. This turned out to be caused by the wrong orger of the arguments to the memset() call in ehci_alloc(), so the allocated TDs weren't cleared either. While at it, stop needlessly initializing the alternate next TD pointer in the QH transfer overlay... Signed-off-by: Sergei Shtylyov Acked-by: Remy Bohmer --- drivers/usb/host/ehci-hcd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 7784d92..37d056e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -275,7 +275,7 @@ static void *ehci_alloc(size_t sz, size_t align) return NULL; } - memset(p, sz, 0); + memset(p, 0, sz); return p; } @@ -350,7 +350,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, (dev->parent->devnum << 16) | (0 << 8) | (0 << 0); qh->qh_endpt2 = cpu_to_hc32(endpt); qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); - qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); td = NULL; tdp = &qh->qh_overlay.qt_next; From e03b4d296b27790de3b25edd32784d20538240d8 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Sat, 26 Jun 2010 00:39:28 +0200 Subject: [PATCH 11/14] Fix compiler warnings for EVB64260, P3G4 and ZUMA Fix following warnings: $ ./MAKEALL EVB64260 P3G4 ZUMA Configuring for EVB64260 board... mpsc.c: In function 'mpsc_putchar_early': mpsc.c:121: warning: dereferencing type-punned pointer will break strict-aliasing rules mpsc.c:127: warning: dereferencing type-punned pointer will break strict-aliasing rules ... Signed-off-by: Anatolij Gustschin --- board/evb64260/mpsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c index 8c4a4c8..3164967 100644 --- a/board/evb64260/mpsc.c +++ b/board/evb64260/mpsc.c @@ -88,7 +88,7 @@ static void galsdma_enable_rx(void); /* GT64240A errata: cant read MPSC/BRG registers... so make mirrors in ram for read/modify write */ -#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->mirror_hack)) +#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->mirror_hack[0])) #define GT_REG_WRITE_MIRROR_G(a,d) {MIRROR_HACK->a ## _M = d; GT_REG_WRITE(a,d);} #define GTREGREAD_MIRROR_G(a) (MIRROR_HACK->a ## _M) From 7030d56b7946c8db2e8082a9b84cd69b9540a0ca Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 17 Jun 2010 11:37:27 -0500 Subject: [PATCH 12/14] MAKEALL: Add missing powerpc 36-bit targets We were missing 8641HPCN_36BIT and MPC8536DS_36BIT. Signed-off-by: Becky Bruce --- MAKEALL | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAKEALL b/MAKEALL index d6d5f5b..27f8bd1 100755 --- a/MAKEALL +++ b/MAKEALL @@ -393,6 +393,7 @@ LIST_85xx=" \ MPC8536DS_NAND \ MPC8536DS_SDCARD \ MPC8536DS_SPIFLASH \ + MPC8536DS_36BIT \ MPC8540ADS \ MPC8540EVAL \ MPC8541CDS \ @@ -453,6 +454,7 @@ LIST_85xx=" \ LIST_86xx=" \ MPC8610HPCD \ + MPC8641HPCN_36BIT \ MPC8641HPCN \ sbc8641d \ XPEDITE5170 \ From 161e4ae46046282fde6a69a0f1f80965f2a1b6f4 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 17 Jun 2010 07:01:40 +0200 Subject: [PATCH 13/14] powerpc: fix wrong comment at GOT definitions r12 is used for accessing the GOT not r14. Fix this in the comment. Signed-off-by: Heiko Schocher --- include/ppc_asm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 84de146..2db4784 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -35,7 +35,7 @@ * * Stolen from prepboot/bootldr.h, (C) 1998 Gabriel Paubert, paubert@iram.es * - * Uses r14 to access the GOT + * Uses r12 to access the GOT */ #define START_GOT \ From a59e27997637a2395ae2cc7f809127f24119a167 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 29 Jun 2010 23:27:35 +0200 Subject: [PATCH 14/14] Prepare 2010.06 Update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 154 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 2 +- 2 files changed, 155 insertions(+), 1 deletion(-) diff --git a/CHANGELOG b/CHANGELOG index 5399007..e6cd97c 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,157 @@ +commit 161e4ae46046282fde6a69a0f1f80965f2a1b6f4 +Author: Heiko Schocher +Date: Thu Jun 17 07:01:40 2010 +0200 + + powerpc: fix wrong comment at GOT definitions + + r12 is used for accessing the GOT not r14. Fix this in the + comment. + + Signed-off-by: Heiko Schocher + +commit 7030d56b7946c8db2e8082a9b84cd69b9540a0ca +Author: Becky Bruce +Date: Thu Jun 17 11:37:27 2010 -0500 + + MAKEALL: Add missing powerpc 36-bit targets + + We were missing 8641HPCN_36BIT and MPC8536DS_36BIT. + + Signed-off-by: Becky Bruce + +commit e03b4d296b27790de3b25edd32784d20538240d8 +Author: Anatolij Gustschin +Date: Sat Jun 26 00:39:28 2010 +0200 + + Fix compiler warnings for EVB64260, P3G4 and ZUMA + + Fix following warnings: + + $ ./MAKEALL EVB64260 P3G4 ZUMA + Configuring for EVB64260 board... + mpsc.c: In function 'mpsc_putchar_early': + mpsc.c:121: warning: dereferencing type-punned pointer will break strict-aliasing rules + mpsc.c:127: warning: dereferencing type-punned pointer will break strict-aliasing rules + ... + + Signed-off-by: Anatolij Gustschin + +commit 9fb3b5085787baad8a133e347ad12c5b3a022e98 +Author: Sergei Shtylyov +Date: Mon Jun 28 22:44:49 2010 +0400 + + EHCI: zero out QH transfer overlay in ehci_submit_async() + + ehci_submit_async() doesn't really zero out the QH transfer overlay (as the EHCI + specification suggests) which leads to the controller seeing the "token" field + as the previous call has left it, i.e.: + - if a timeout occured on the previous call (Active bit left as 1), controller + incorrectly tries to complete a previous transaction on a newly programmed + endpoint; + - if a halt occured on the previous call (Halted bit set to 1), controller just + ignores the newly programmed TD(s) and the function then keeps returning error + ad infinitum. + + This turned out to be caused by the wrong orger of the arguments to the memset() + call in ehci_alloc(), so the allocated TDs weren't cleared either. + + While at it, stop needlessly initializing the alternate next TD pointer in the + QH transfer overlay... + + Signed-off-by: Sergei Shtylyov + Acked-by: Remy Bohmer + +commit 0d7f4abcf6bbef06504c82e03f11054468262430 +Author: Remy Bohmer +Date: Thu Jun 17 21:17:08 2010 +0200 + + Fix console_buffer size conflict error. + + The console_buffer size is declared in common/main.c as + -- char console_buffer[CONFIG_SYS_CBSIZE + 1]; + so this extern definition is wrong. + + Signed-off-by: Remy Bohmer + +commit 38c38c344c200ee90cfd243671473c449b6f0815 +Author: Poonam Aggrwal +Date: Tue Jun 22 12:50:46 2010 +0530 + + 85xx/p1_p2_rdb: Added RevD board version support + + - Also modified the code to use io accessors. + + Signed-off-by: Poonam Aggrwal + Signed-off-by: Dipen Dudhat + Acked-by: Kumar Gala + +commit c987f4753b0afadb38acd7e61df7ba11e8a0203f +Author: Felix Radensky +Date: Mon Jun 28 01:57:39 2010 +0300 + + tsec: Fix eTSEC2 link problem on P2020RDB + + On P2020RDB eTSEC2 is connected to Vitesse VSC8221 PHY via SGMII. + Current TBI PHY settings for SGMII mode cause link problems on + this platform, link never comes up. + + Fix this by making TBI PHY settings configurable and add a working + configuration for P2020RDB. + + Signed-off-by: Felix Radensky + Acked-by: Andy Fleming + Acked-by: Peter Tyser + Tested-by: Peter Tyser + +commit d3bee08332fbc9cc5b6dc22ecd34050a85d44d0a +Author: Poonam Aggrwal +Date: Wed Jun 23 19:32:28 2010 +0530 + + 85xx/p1_p2_rdb: Modify the CLK_CTRL value for DDR at 667MHz + + Use a slighly larger value of CLK_CTRL for DDR at 667MHz + which fixes random crashes while linux booting. + + Applicable for both NAND and NOR boot. + + Signed-off-by: Sandeep Gopalpet + Signed-off-by: Poonam Aggrwal + Acked-by: Andy Fleming + +commit cdc6363f423900645265563d705a0a5a964ae40c +Author: Poonam Aggrwal +Date: Wed Jun 23 19:42:07 2010 +0530 + + 85xx/p1_p2_rdb: not able to modify "$bootfile" environment variable + + Because the variable was getting defined twice. + + Signed-off-by: Poonam Aggrwal + Acked-by: Andy Fleming + +commit 4ccd5510e50b5675227a1fe0e5ca099d333f637d +Author: Wolfgang Denk +Date: Tue Jun 29 01:33:35 2010 +0200 + + MPC512x: workaround data corruption for unaligned local bus accesses + + Commit 460c2ce3 "MPC5200: workaround data corruption for unaligned + local bus accesses" fixed the problem for MPC5200 only, but MPC512x is + affected as well, so apply the same fix here, too. + + Signed-off-by: Wolfgang Denk + Cc: Detlev Zundel + Cc: Anatolij Gustschin + Acked-by: Detlev Zundel + +commit 482126e27b3dbf0e69a6445da8b94b3551adf05d +Author: Wolfgang Denk +Date: Wed Jun 23 20:50:54 2010 +0200 + + Prepare v2010.06-rc3 + + Signed-off-by: Wolfgang Denk + commit 460c2ce362e56890c2a029e2c3b1ff2796c7fc54 Author: Wolfgang Denk Date: Mon Jun 21 22:29:59 2010 +0200 diff --git a/Makefile b/Makefile index 87d5214..d7a6921 100644 --- a/Makefile +++ b/Makefile @@ -24,7 +24,7 @@ VERSION = 2010 PATCHLEVEL = 06 SUBLEVEL = -EXTRAVERSION = -rc3 +EXTRAVERSION = ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else