Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

musb: sunxi: Use BIT instead of numerical shift

Browse Source 
Use BIT is possible areas instead of numerical shift.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
lime2-spi
Jagan Teki 6 years ago
parent 9d12a82ed3
commit 5c5fe883e0
1 changed files with 14 additions and 14 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 28
      drivers/usb/musb-new/sunxi.c

28
drivers/usb/musb-new/sunxi.c
Unescape View File

@ -93,9 +93,9 @@ static u32 USBC_WakeUp_ClearChangeDetect(u32 reg_val)
{
u32 temp = reg_val;
temp &= ~(1 << USBC_BP_ISCR_VBUS_CHANGE_DETECT);
temp &= ~(1 << USBC_BP_ISCR_ID_CHANGE_DETECT);
temp &= ~(1 << USBC_BP_ISCR_DPDM_CHANGE_DETECT);
temp &= ~BIT(USBC_BP_ISCR_VBUS_CHANGE_DETECT);
temp &= ~BIT(USBC_BP_ISCR_ID_CHANGE_DETECT);
temp &= ~BIT(USBC_BP_ISCR_DPDM_CHANGE_DETECT);
return temp;
}
@ -105,7 +105,7 @@ static void USBC_EnableIdPullUp(__iomem void *base)
u32 reg_val;
reg_val = musb_readl(base, USBC_REG_o_ISCR);
reg_val |= (1 << USBC_BP_ISCR_ID_PULLUP_EN);
reg_val |= BIT(USBC_BP_ISCR_ID_PULLUP_EN);
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
musb_writel(base, USBC_REG_o_ISCR, reg_val);
}
@ -115,7 +115,7 @@ static void USBC_EnableDpDmPullUp(__iomem void *base)
u32 reg_val;
reg_val = musb_readl(base, USBC_REG_o_ISCR);
reg_val |= (1 << USBC_BP_ISCR_DPDM_PULLUP_EN);
reg_val |= BIT(USBC_BP_ISCR_DPDM_PULLUP_EN);
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
musb_writel(base, USBC_REG_o_ISCR, reg_val);
}
@ -171,7 +171,7 @@ static void USBC_ConfigFIFO_Base(void)
/* config usb fifo, 8kb mode */
reg_value = readl(SUNXI_SRAMC_BASE + 0x04);
reg_value &= ~(0x03 << 0);
reg_value |= (1 << 0);
reg_value |= BIT(0);
writel(reg_value, SUNXI_SRAMC_BASE + 0x04);
}
@ -275,15 +275,15 @@ static int sunxi_musb_init(struct musb *musb)
musb->isr = sunxi_musb_interrupt;
setbits_le32(&glue->ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
setbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
if (glue->cfg->clkgate_bit)
setbits_le32(&glue->ccm->ahb_gate0,
1 << glue->cfg->clkgate_bit);
BIT(glue->cfg->clkgate_bit));
#ifdef CONFIG_SUNXI_GEN_SUN6I
setbits_le32(&glue->ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
setbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
if (glue->cfg->rst_bit)
setbits_le32(&glue->ccm->ahb_reset0_cfg,
1 << glue->cfg->rst_bit);
BIT(glue->cfg->rst_bit));
#endif
sunxi_usb_phy_init(0);
@ -415,15 +415,15 @@ static int musb_usb_remove(struct udevice *dev)
sunxi_usb_phy_exit(0);
#ifdef CONFIG_SUNXI_GEN_SUN6I
clrbits_le32(&glue->ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
clrbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
if (glue->cfg->rst_bit)
clrbits_le32(&glue->ccm->ahb_reset0_cfg,
1 << glue->cfg->rst_bit);
BIT(glue->cfg->rst_bit));
#endif
clrbits_le32(&glue->ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
clrbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
if (glue->cfg->clkgate_bit)
clrbits_le32(&glue->ccm->ahb_gate0,
1 << glue->cfg->clkgate_bit);
BIT(glue->cfg->clkgate_bit));
free(host->host);
host->host = NULL;

Write Preview
Loading…
Cancel
Save