diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c index cdfce6c..ace6d47 100644 --- a/board/mpc8641hpcn/mpc8641hpcn.c +++ b/board/mpc8641hpcn/mpc8641hpcn.c @@ -57,9 +57,6 @@ int checkboard (void) #ifdef CONFIG_PCI - /* Sri: Note that at this point we will only test on PCI1 - */ - volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; volatile ccsr_pex_t *pex1 = &immap->im_pex1; @@ -70,13 +67,16 @@ int checkboard (void) uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); - if ((io_sel==2 || io_sel==3 || io_sel==5 || io_sel==6 || io_sel==7 || io_sel==0xF ) && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){ - debug ("PCI-EXPRESS 1: %s \n", - pex1_agent ? "Agent" : "Host"); + if ((io_sel==2 || io_sel==3 || io_sel==5 \ + || io_sel==6 || io_sel==7 || io_sel==0xF) + && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){ + debug ("PCI-EXPRESS 1: %s \n", + pex1_agent ? "Agent" : "Host"); debug("0x%08x=0x%08x ", &pex1->pme_msg_det,pex1->pme_msg_det); if (pex1->pme_msg_det) { pex1->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pex1->pme_msg_det); + debug (" with errors. Clearing. Now 0x%08x", + pex1->pme_msg_det); } debug ("\n"); } else { @@ -120,15 +120,6 @@ initdram(int board_type) ddr_enable_ecc(dram_size); #endif - /* - * Initialize SDRAM. Currently HPCN doesn't have - * SDRAM but we'll leave this here for now - * in case someone changes their mind - */ -#if !defined(CONFIG_MPC8641HPCN) - // sdram_init(); -#endif - puts(" DDR: "); return dram_size; } @@ -163,7 +154,7 @@ local_bus_init(void) } #if defined(CFG_DRAM_TEST) -int testdram (void) +int testdram(void) { uint *pstart = (uint *) CFG_MEMTEST_START; uint *pend = (uint *) CFG_MEMTEST_END; @@ -198,10 +189,10 @@ int testdram (void) #if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -long int fixed_sdram (void) +/* + * Fixed sdram init -- doesn't use serial presence detect. + */ +long int fixed_sdram(void) { #if !defined(CFG_RAMBOOT) volatile immap_t *immap = (immap_t *)CFG_IMMR; diff --git a/board/mpc8641hpcn/oftree.dts b/board/mpc8641hpcn/oftree.dts index 6c32ade..8e38047 100644 --- a/board/mpc8641hpcn/oftree.dts +++ b/board/mpc8641hpcn/oftree.dts @@ -1,5 +1,5 @@ /* - * MPC8641 HPCn Device Tree Source + * MPC8641 HPCN Device Tree Source * * Copyright 2006 Freescale Semiconductor Inc. * diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index b0fe8ab..36da777 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -32,31 +32,30 @@ #include #endif +extern unsigned long get_board_sys_clk(ulong dummy); -// SS: For debug only, remove after use static __inline__ unsigned long get_dbat3u (void) { - unsigned long dbat3u; - asm volatile("mfspr %0, 542" : "=r" (dbat3u) :); - return dbat3u; + unsigned long dbat3u; + asm volatile("mfspr %0, 542" : "=r" (dbat3u) :); + return dbat3u; } static __inline__ unsigned long get_dbat3l (void) { - unsigned long dbat3l; - asm volatile("mfspr %0, 543" : "=r" (dbat3l) :); - return dbat3l; + unsigned long dbat3l; + asm volatile("mfspr %0, 543" : "=r" (dbat3l) :); + return dbat3l; } static __inline__ unsigned long get_msr (void) { - unsigned long msr; - asm volatile("mfmsr %0" : "=r" (msr) :); - return msr; + unsigned long msr; + asm volatile("mfmsr %0" : "=r" (msr) :); + return msr; } -extern unsigned long get_board_sys_clk(ulong dummy); int checkcpu (void) { @@ -66,7 +65,7 @@ int checkcpu (void) uint major, minor; uint lcrr; /* local bus clock ratio register */ uint clkdiv; /* clock divider portion of lcrr */ - + puts("Freescale PowerPC\n"); pvr = get_pvr(); @@ -74,10 +73,10 @@ int checkcpu (void) major = PVR_MAJ(pvr); minor = PVR_MIN(pvr); - puts ("CPU:\n"); + puts("CPU:\n"); printf(" Core: "); - + switch (ver) { case PVR_VER(PVR_86xx): puts("E600"); @@ -94,7 +93,7 @@ int checkcpu (void) minor = SVR_MIN(svr); puts(" System: "); - switch (ver) { + switch (ver) { case SVR_8641: puts("8641"); break; @@ -113,7 +112,7 @@ int checkcpu (void) printf("CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000); printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000); printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000); - + #if defined(CFG_LBC_LCRR) lcrr = CFG_LBC_LCRR; #else @@ -134,11 +133,11 @@ int checkcpu (void) printf(" L2: "); if (get_l2cr() & 0x80000000) - printf("Enabled\n"); + printf("Enabled\n"); else - printf("Disabled\n"); - - return (0); + printf("Disabled\n"); + + return 0; } @@ -149,7 +148,7 @@ soft_restart(unsigned long addr) { #ifndef CONFIG_MPC8641HPCN - + /* SRR0 has system reset vector, SRR1 has default MSR value */ /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ @@ -215,7 +214,7 @@ int set_px_sysclk(ulong sysclk) sysclk_s = 0x06; sysclk_r = 0x1F; sysclk_v = 0x3B; - sysclk_aux = 0x06; + sysclk_aux = 0x06; break; case 166: sysclk_s = 0x06; @@ -227,14 +226,14 @@ int set_px_sysclk(ulong sysclk) printf("Unsupported SYSCLK frequency.\n"); return 0; } - + vclkh = (sysclk_s << 5) | sysclk_r ; vclkl = sysclk_v; out8(PIXIS_BASE+PIXIS_VCLKH,vclkh); out8(PIXIS_BASE+PIXIS_VCLKL,vclkl); out8(PIXIS_BASE+PIXIS_AUX,sysclk_aux); - + return 1; } @@ -262,7 +261,7 @@ int set_px_mpxpll(ulong mpxpll) tmp = in8(PIXIS_BASE+PIXIS_VSPEED1); tmp = (tmp & 0xF0) | (val & 0x0F); out8(PIXIS_BASE+PIXIS_VSPEED1,tmp); - + return 1; } @@ -270,9 +269,8 @@ int set_px_corepll(ulong corepll) { u8 tmp; u8 val; - - switch((int)corepll) - { + + switch ((int)corepll) { case 20: val = 0x08; break; @@ -295,11 +293,11 @@ int set_px_corepll(ulong corepll) printf("Unsupported COREPLL ratio.\n"); return 0; } - + tmp = in8(PIXIS_BASE+PIXIS_VSPEED0); tmp = (tmp & 0xE0) | (val & 0x1F); out8(PIXIS_BASE+PIXIS_VSPEED0,tmp); - + return 1; } @@ -311,7 +309,7 @@ void read_from_px_regs(int set) tmp = tmp | mask; else tmp = tmp & ~mask; - out8(PIXIS_BASE+PIXIS_VCFGEN0,tmp); + out8(PIXIS_BASE+PIXIS_VCFGEN0,tmp); } void read_from_px_regs_altbank(int set) @@ -322,7 +320,7 @@ void read_from_px_regs_altbank(int set) tmp = tmp | mask; else tmp = tmp & ~mask; - out8(PIXIS_BASE+PIXIS_VCFGEN1,tmp); + out8(PIXIS_BASE+PIXIS_VCFGEN1,tmp); } void set_altbank(void) @@ -342,7 +340,7 @@ void set_px_go(void) out8(PIXIS_BASE+PIXIS_VCTL,tmp); tmp = in8(PIXIS_BASE+PIXIS_VCTL); tmp = tmp | 0x01; - out8(PIXIS_BASE+PIXIS_VCTL,tmp); + out8(PIXIS_BASE+PIXIS_VCTL,tmp); } void set_px_go_with_watchdog(void) @@ -353,7 +351,7 @@ void set_px_go_with_watchdog(void) out8(PIXIS_BASE+PIXIS_VCTL,tmp); tmp = in8(PIXIS_BASE+PIXIS_VCTL); tmp = tmp | 0x09; - out8(PIXIS_BASE+PIXIS_VCTL,tmp); + out8(PIXIS_BASE+PIXIS_VCTL,tmp); } /* This function takes the non-integral cpu:mpx pll ratio @@ -381,11 +379,11 @@ ulong strfractoint(uchar *strptr) no_dec = 1; break; /* Break from loop once the end of string is reached */ } - + intarr[i] = strptr[i]; i++; } - + intarr_len = i; /* Assign length of integer part to intarr_len*/ intarr[i] = '\0'; /* */ @@ -404,14 +402,14 @@ ulong strfractoint(uchar *strptr) i++; j++; } - + decarr_len = j; decarr[j] = '\0'; - + mulconst=1; for(i=0; i 1) - { - cmd = argv[1][1]; - switch(cmd) - { - case 'f': /* reset with frequency changed */ - - if (argc < 5) - goto my_usage; - - read_from_px_regs(0); - - val = set_px_sysclk(simple_strtoul(argv[2],NULL,10)); - - corepll = strfractoint(argv[3]); - val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[4],NULL,10)); - if(val == 3) - { - printf("Setting registers VCFGEN0 and VCTL\n"); - read_from_px_regs(1); - printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n"); - set_px_go(); - } - else - goto my_usage; - - while(1); /* Not reached */ - - case 'l': - if(argv[2][1] == 'f') - { - read_from_px_regs(0); - read_from_px_regs_altbank(0); - /* reset with frequency changed */ - val = set_px_sysclk(simple_strtoul(argv[3],NULL,10)); - - corepll = strfractoint(argv[4]); - val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[5],NULL,10)); - if(val == 3) - { - printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs(1); - read_from_px_regs_altbank(1); - printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n"); - set_px_go_with_watchdog(); - - } - else - goto my_usage; - - while(1); /* Not reached */ - } - else /* Reset from next bank without changing frequencies */ - { - read_from_px_regs(0); - read_from_px_regs_altbank(0); - if(argc > 2) - goto my_usage; - printf("Setting registers VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs_altbank(1); - printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n"); - set_px_go_with_watchdog(); - while(1); /* Not reached */ - } - - default: - goto my_usage; - } + + if (argc > 1) { + cmd = argv[1][1]; + switch(cmd) { + case 'f': /* reset with frequency changed */ + if (argc < 5) + goto my_usage; + read_from_px_regs(0); + + val = set_px_sysclk(simple_strtoul(argv[2],NULL,10)); + + corepll = strfractoint(argv[3]); + val = val + set_px_corepll(corepll); + val = val + set_px_mpxpll(simple_strtoul(argv[4], + NULL, 10)); + if (val == 3) { + printf("Setting registers VCFGEN0 and VCTL\n"); + read_from_px_regs(1); + printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n"); + set_px_go(); + } else + goto my_usage; + + while (1); /* Not reached */ + + case 'l': + if (argv[2][1] == 'f') { + read_from_px_regs(0); + read_from_px_regs_altbank(0); + /* reset with frequency changed */ + val = set_px_sysclk(simple_strtoul(argv[3],NULL,10)); + + corepll = strfractoint(argv[4]); + val = val + set_px_corepll(corepll); + val = val + set_px_mpxpll(simple_strtoul(argv[5],NULL,10)); + if (val == 3) { + printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs(1); + read_from_px_regs_altbank(1); + printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n"); + set_px_go_with_watchdog(); + } else + goto my_usage; + + while(1); /* Not reached */ + } else { + /* Reset from next bank without changing frequencies */ + read_from_px_regs(0); + read_from_px_regs_altbank(0); + if(argc > 2) + goto my_usage; + printf("Setting registers VCFGEN1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs_altbank(1); + printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n"); + set_px_go_with_watchdog(); + while(1); /* Not reached */ + } + + default: + goto my_usage; + } + my_usage: - printf("\nUsage: reset cf \n"); - printf(" reset altbank [cf ]\n"); - printf("For example: reset cf 40 2.5 10\n"); - printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n"); - return; - } - else - out8(PIXIS_BASE+PIXIS_RST,0); - + printf("\nUsage: reset cf \n"); + printf(" reset altbank [cf ]\n"); + printf("For example: reset cf 40 2.5 10\n"); + printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n"); + return; + } else + out8(PIXIS_BASE+PIXIS_RST,0); + #endif /* !CONFIG_MPC8641HPCN */ - + while(1); /* not reached */ } -/* ------------------------------------------------------------------------- */ - /* * Get timebase clock frequency */ @@ -566,24 +550,21 @@ unsigned long get_tbclk(void) sys_info_t sys_info; get_sys_info(&sys_info); - return ((sys_info.freqSystemBus + 3L) / 4L); - + return (sys_info.freqSystemBus + 3L) / 4L; } -/* ------------------------------------------------------------------------- */ #if defined(CONFIG_WATCHDOG) void watchdog_reset(void) { - } #endif /* CONFIG_WATCHDOG */ -/* ------------------------------------------------------------------------- */ #if defined(CONFIG_DDR_ECC) -void dma_init(void) { +void dma_init(void) +{ volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_dma_t *dma = &immap->im_dma; @@ -593,7 +574,8 @@ void dma_init(void) { return; } -uint dma_check(void) { +uint dma_check(void) +{ volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_dma_t *dma = &immap->im_dma; volatile uint status = dma->sr0; @@ -609,7 +591,8 @@ uint dma_check(void) { return status; } -int dma_xfer(void *dest, uint count, void *src) { +int dma_xfer(void *dest, uint count, void *src) +{ volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_dma_t *dma = &immap->im_dma; @@ -622,6 +605,7 @@ int dma_xfer(void *dest, uint count, void *src) { asm("sync;isync"); return dma_check(); } + #endif /* CONFIG_DDR_ECC */ @@ -631,7 +615,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) u32 *p; ulong clock; int len; - + clock = bd->bi_busfreq; p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); if (p != NULL) @@ -649,7 +633,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len); memcpy(p, bd->bi_enetaddr, 6); #endif - + #if defined(CONFIG_MPC86XX_TSEC2) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len); memcpy(p, bd->bi_enet1addr, 6); diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c index 582ac6b..c816c18 100644 --- a/cpu/mpc86xx/cpu_init.c +++ b/cpu/mpc86xx/cpu_init.c @@ -36,13 +36,12 @@ * initialize a bunch of registers */ -void cpu_init_f (void) +void cpu_init_f(void) { DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_lbc_t *memctl = &immap->im_lbc; - //u8 val; - + /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET); @@ -72,23 +71,21 @@ void cpu_init_f (void) memctl->br1 = CFG_BR1_PRELIM; #endif - //#if !defined(CONFIG_MPC86xx) #if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM) memctl->or2 = CFG_OR2_PRELIM; memctl->br2 = CFG_BR2_PRELIM; #endif - //#endif - + #if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM) memctl->or3 = CFG_OR3_PRELIM; memctl->br3 = CFG_BR3_PRELIM; #endif - + #if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM) memctl->or4 = CFG_OR4_PRELIM; memctl->br4 = CFG_BR4_PRELIM; #endif - + #if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM) memctl->or5 = CFG_OR5_PRELIM; memctl->br5 = CFG_BR5_PRELIM; @@ -123,9 +120,9 @@ void cpu_init_f (void) /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { - return (0); + return 0; } diff --git a/cpu/mpc86xx/i2c.c b/cpu/mpc86xx/i2c.c index c5d4642..f2b4b0f 100644 --- a/cpu/mpc86xx/i2c.c +++ b/cpu/mpc86xx/i2c.c @@ -74,29 +74,27 @@ i2c_init(int speed, int slaveadd) } static __inline__ int -i2c_wait4bus (void) +i2c_wait4bus(void) { ulong timeval = get_timer (0); - // debug("I2C: Wait for bus\n"); while (readb(I2CCSR) & MPC86xx_I2CSR_MBB) { - if (get_timer (timeval) > TIMEOUT) { + if (get_timer(timeval) > TIMEOUT) { return -1; } } - return 0; + return 0; } static __inline__ int -i2c_wait (int write) +i2c_wait(int write) { u32 csr; ulong timeval = get_timer (0); do { csr = readb(I2CCSR); - if (!(csr & MPC86xx_I2CSR_MIF)) continue; @@ -118,7 +116,7 @@ i2c_wait (int write) } return 0; - } while (get_timer (timeval) < TIMEOUT); + } while (get_timer(timeval) < TIMEOUT); debug("i2c_wait: timed out\n"); return -1; @@ -127,14 +125,13 @@ i2c_wait (int write) static __inline__ int i2c_write_addr (u8 dev, u8 dir, int rsta) { - // debug("I2C: Write Addr\n"); - writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX | - (rsta?MPC86xx_I2CCR_RSTA:0), + writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX + | (rsta ? MPC86xx_I2CCR_RSTA : 0), I2CCCR); writeb((dev << 1) | dir, I2CCDR); - if (i2c_wait (I2C_WRITE) < 0) + if (i2c_wait(I2C_WRITE) < 0) return 0; return 1; @@ -144,14 +141,14 @@ static __inline__ int __i2c_write (u8 *data, int length) { int i; - // debug("I2C: __i2c_write\n"); + writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX, I2CCCR); - for (i=0; i < length; i++) { + for (i = 0; i < length; i++) { writeb(data[i], I2CCDR); - if (i2c_wait (I2C_WRITE) < 0) + if (i2c_wait(I2C_WRITE) < 0) break; } @@ -163,33 +160,30 @@ __i2c_read (u8 *data, int length) { int i; - writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | - ((length == 1) ? MPC86xx_I2CCR_TXAK : 0), + writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA + | ((length == 1) ? MPC86xx_I2CCR_TXAK : 0), I2CCCR); /* dummy read */ readb(I2CCDR); - // debug("length = %d\n", length); - for (i=0; i < length; i++) { - if (i2c_wait (I2C_READ) < 0) + for (i = 0; i < length; i++) { + if (i2c_wait(I2C_READ) < 0) break; /* Generate ack on last next to last byte */ if (i == length - 2) - writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | - MPC86xx_I2CCR_TXAK, + writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA + | MPC86xx_I2CCR_TXAK, I2CCCR); /* Generate stop on last byte */ if (i == length - 1) writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_TXAK, I2CCCR); - // debug("I2CCR = 0x%08x\n", readb(I2CCCR)); data[i] = readb(I2CCDR); - // debug("data[i] = 0x%08x\n", data[i]); } - // debug("Returning i = %d\n", i); + return i; } @@ -199,19 +193,19 @@ i2c_read (u8 dev, uint addr, int alen, u8 *data, int length) int i = 0; u8 *a = (u8*)&addr; - if (i2c_wait4bus () < 0) + if (i2c_wait4bus() < 0) goto exit; - if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) + if (i2c_write_addr(dev, I2C_WRITE, 0) == 0) goto exit; - if (__i2c_write (&a[4 - alen], alen) != alen) + if (__i2c_write(&a[4 - alen], alen) != alen) goto exit; - if (i2c_write_addr (dev, I2C_READ, 1) == 0) + if (i2c_write_addr(dev, I2C_READ, 1) == 0) goto exit; - i = __i2c_read (data, length); + i = __i2c_read(data, length); exit: writeb(MPC86xx_I2CCR_MEN, I2CCCR); @@ -225,16 +219,16 @@ i2c_write (u8 dev, uint addr, int alen, u8 *data, int length) int i = 0; u8 *a = (u8*)&addr; - if (i2c_wait4bus () < 0) + if (i2c_wait4bus() < 0) goto exit; - if (i2c_write_addr (dev, I2C_WRITE, 0) == 0) + if (i2c_write_addr(dev, I2C_WRITE, 0) == 0) goto exit; - if (__i2c_write (&a[4 - alen], alen) != alen) + if (__i2c_write(&a[4 - alen], alen) != alen) goto exit; - i = __i2c_write (data, length); + i = __i2c_write(data, length); exit: writeb(MPC86xx_I2CCR_MEN, I2CCCR); @@ -253,21 +247,21 @@ int i2c_probe (uchar chip) */ udelay(10000); - return i2c_read (chip, 0, 1, (char *)&tmp, 1); + return i2c_read(chip, 0, 1, (char *)&tmp, 1); } uchar i2c_reg_read (uchar i2c_addr, uchar reg) { char buf[1]; - i2c_read (i2c_addr, reg, 1, buf, 1); + i2c_read(i2c_addr, reg, 1, buf, 1); - return (buf[0]); + return buf[0]; } void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val) { - i2c_write (i2c_addr, reg, 1, &val, 1); + i2c_write(i2c_addr, reg, 1, &val, 1); } #endif /* CONFIG_HARD_I2C */ diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c index 759a30f..b5cd439 100644 --- a/cpu/mpc86xx/interrupts.c +++ b/cpu/mpc86xx/interrupts.c @@ -75,7 +75,7 @@ static __inline__ void set_dec (unsigned long val) /* interrupt is not supported yet */ int interrupt_init_cpu (unsigned *decrementer_count) { - return (0); + return 0; } @@ -91,14 +91,14 @@ int interrupt_init (void) decrementer_count = get_tbclk()/CFG_HZ; debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n", (get_tbclk()/1000000), decrementer_count); - + set_dec (decrementer_count); set_msr (get_msr () | MSR_EE); debug("MSR = 0x%08lx, Decrementer reg = 0x%08lx\n", get_msr(), get_dec()); - - return (0); + + return 0; } @@ -113,7 +113,7 @@ int disable_interrupts (void) ulong msr = get_msr (); set_msr (msr & ~MSR_EE); - return ((msr & MSR_EE) != 0); + return (msr & MSR_EE) != 0; } @@ -131,7 +131,6 @@ void timer_interrupt_cpu (struct pt_regs *regs) { /* nothing to do here */ - return; } @@ -139,14 +138,14 @@ void timer_interrupt (struct pt_regs *regs) { /* call cpu specific function from $(CPU)/interrupts.c */ timer_interrupt_cpu (regs); - + timestamp++; ppcDcbf(×tamp); - + /* Restore Decrementer Count */ set_dec (decrementer_count); - + #if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG) if ((timestamp % (CFG_WATCHDOG_FREQ)) == 0) WATCHDOG_RESET (); @@ -169,8 +168,8 @@ void reset_timer (void) } ulong get_timer (ulong base) -{ - return (timestamp - base); +{ + return timestamp - base; } void set_timer (ulong t) @@ -185,13 +184,11 @@ void set_timer (ulong t) void irq_install_handler(int vec, interrupt_handler_t *handler, void *arg) { - return; } void irq_free_handler(int vec) { - return; } diff --git a/cpu/mpc86xx/pci.c b/cpu/mpc86xx/pci.c index 9cf5f7c..05976bd 100644 --- a/cpu/mpc86xx/pci.c +++ b/cpu/mpc86xx/pci.c @@ -22,7 +22,7 @@ */ /* - * PEX Configuration space access support for MPC85xx PEX Bridge + * PEX Configuration space access support for PEX Bridge */ #include #include @@ -44,24 +44,25 @@ pci_mpc86xx_init(struct pci_controller *hose) ulong addr, data; - uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); uint devdisr = gur->devdisr; uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16; - - if ((io_sel==2 || io_sel==3 || io_sel==5 || io_sel==6 || io_sel==7 || io_sel==0xF ) && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){ + + if ((io_sel==2 || io_sel==3 || io_sel==5 + || io_sel==6 || io_sel==7 || io_sel==0xF ) + && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){ printf ("PCI-EXPRESS 1: Configured as %s \n", pex1_agent ? "Agent" : "Host"); printf (" Scanning PCI bus"); debug("0x%08x=0x%08x ", &pex1->pme_msg_det,pex1->pme_msg_det); if (pex1->pme_msg_det) { pex1->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pex1->pme_msg_det); + debug (" with errors. Clearing. Now 0x%08x", + pex1->pme_msg_det); } debug ("\n"); } - - + hose->first_busno = 0; hose->last_busno = 0x7f; @@ -88,36 +89,26 @@ pci_mpc86xx_init(struct pci_controller *hose) */ pci_register_hose(hose); - //#define MPC8548_REV1_PEX12_ERRATA -#ifdef MPC8548_REV1_PEX12_ERRATA - /* can only read/write 4 bytes */ - pci_read_config_dword (PCI_BDF(0,0,0), PCI_VENDOR_ID, ®32); - printf("pex_mpc85xx_init: pex cr %2x %8x\n",PCI_VENDOR_ID, reg32); - - pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®32); - reg32 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg32); -#else pci_read_config_word (PCI_BDF(0,0,0), PCI_VENDOR_ID, ®16); debug("pex_mpc86xx_init: read %2x %4x\n",PCI_VENDOR_ID, reg16); pci_read_config_word (PCI_BDF(0,0,0), PCI_DEVICE_ID, ®16); debug("pex_mpc86xx_init: read %2x %4x\n",PCI_DEVICE_ID, reg16); pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY \ + | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16); pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16); debug("pex_mpc86xx_init: read %2x %4x\n",PCI_COMMAND, reg16); - -#endif - /* * Clear non-reserved bits in status register. */ - // pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff); - // pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80); + /* + * pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff); + * pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80); + */ pex1->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff; pex1->powar1 = 0x8004401c; /* 512M MEM space */ @@ -129,7 +120,6 @@ pci_mpc86xx_init(struct pci_controller *hose) pex1->potar2 = 0x00000000; pex1->potear2 = 0x00000000; - if (!pex1->piwar1) { pex1->pitar1 = 0x00000000; pex1->piwbar1 = (0x80000000 >> 12 ) & 0x000fffff; @@ -140,57 +130,34 @@ pci_mpc86xx_init(struct pci_controller *hose) pex1->pitar2 = 0x00000000; pex1->piwbar2 = (0xe2000000 >> 12 ) & 0x000fffff; pex1->piwar2 = 0xa0f5501e; /* Enable, Prefetch, Local Mem, - - - -/* if (pex1_host) { */ -/* #ifdef MPC8548_REV1_PEX12_ERRATA */ -/* pci_write_config_dword (PCI_BDF(0,0,0), 0x18, 0x00ff0100); */ -/* #else */ - - - - *(u32 *)(0xf8008000)= 0x80000000; - debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004)); - - - pci_write_config_byte(PCI_BDF(0,0,0), PCI_PRIMARY_BUS,0x20); - pci_write_config_byte(PCI_BDF(0,0,0), PCI_SECONDARY_BUS,0x00); - pci_write_config_byte(PCI_BDF(0,0,0), PCI_SUBORDINATE_BUS,0x1F); -/* #endif */ - - - *(u32 *)(0xf8008000)= 0x80200000; - debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004)); - - *(u32 *)(0xf8008000)= 0x80200000; - debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004)); - - *(u32 *)(0xf8008000)= 0x80200000; - debug("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004)); + * Snoop R/W, 2G */ + *(u32 *)(0xf8008000)= 0x80000000; + debug("Received data for addr 0x%08lx is 0x%08lx\n", + *(u32*)(0xf8008000), *(u32*)(0xf8008004)); - - hose->last_busno = pci_hose_scan(hose); - hose->last_busno = 0x21; - debug("pex_mpc86xx_init: last_busno %x\n",hose->last_busno); - debug("pex_mpc86xx init: current_busno %x\n ",hose->current_busno); + pci_write_config_byte(PCI_BDF(0,0,0), PCI_PRIMARY_BUS,0x20); + pci_write_config_byte(PCI_BDF(0,0,0), PCI_SECONDARY_BUS,0x00); + pci_write_config_byte(PCI_BDF(0,0,0), PCI_SUBORDINATE_BUS,0x1F); + *(u32 *)(0xf8008000)= 0x80200000; + debug("Received data for addr 0x%08lx is 0x%08lx\n", + *(u32*)(0xf8008000), *(u32*)(0xf8008004)); - printf("....PCI scan & enumeration done\n"); + *(u32 *)(0xf8008000)= 0x80200000; + debug("Received data for addr 0x%08lx is 0x%08lx\n", + *(u32*)(0xf8008000), *(u32*)(0xf8008004)); -/* *(u32 *)(0xf8008000)= 0x80000000 | (0x12 << 11); */ -/* printf("Received data for addr 0x%08lx is 0x%08lx\n", *(u32*)(0xf8008000), *(u32*)(0xf8008004)); */ - -/* if (hose->last_busno < 1) { */ -/* hose->last_busno=1; /\*Hack*\/ */ -/* } else { */ -/* hose->last_busno = 0; */ -/* } */ -/*}*/ -/* pci_read_config_dword (PCI_BDF(1,0,0), 0x18, ®32); */ -/* printf("pex_mpc86xx_init: pex cr %2x %8x\n",0x18, reg32); */ + *(u32 *)(0xf8008000)= 0x80200000; + debug("Received data for addr 0x%08lx is 0x%08lx\n", + *(u32*)(0xf8008000), *(u32*)(0xf8008004)); + hose->last_busno = pci_hose_scan(hose); + hose->last_busno = 0x21; + debug("pex_mpc86xx_init: last_busno %x\n",hose->last_busno); + debug("pex_mpc86xx init: current_busno %x\n ",hose->current_busno); + printf("....PCI scan & enumeration done\n"); } + #endif /* CONFIG_PCI */ diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c index 9c07f20..9ce31d7 100644 --- a/cpu/mpc86xx/spd_sdram.c +++ b/cpu/mpc86xx/spd_sdram.c @@ -179,7 +179,7 @@ spd_sdram(void) unsigned int law_size; volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; - + /* * Read SPD information. */ @@ -614,7 +614,7 @@ spd_sdram(void) ddr1->timing_cfg_2 = (0 | ((add_lat & 0x7) << 28) /* ADD_LAT */ - | ((cpo & 0x1f) << 23) /* CPO */ + | ((cpo & 0x1f) << 23) /* CPO */ | ((wr_lat & 0x7) << 19) /* WR_LAT */ | ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */ | ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */ @@ -806,7 +806,7 @@ spd_sdram(void) /* * Memory will be initialized via DMA, or not at all. */ - d_init = 0; + d_init = 0; #endif ddr1->sdram_cfg_2 = (0 @@ -946,8 +946,7 @@ spd_sdram(void) | (LAWAR_SIZE & law_size)); debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1); debug("DDR: LARAR1=0x%08x\n", mcm->lawar1); - - + return memsize * 1024 * 1024; } diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c index 0f5a638..a08ae5f 100644 --- a/cpu/mpc86xx/speed.c +++ b/cpu/mpc86xx/speed.c @@ -33,9 +33,7 @@ unsigned long get_board_sys_clk(ulong dummy); unsigned long get_sysclk_from_px_regs(void); -/* --------------------------------------------------------------- */ - -void get_sys_info (sys_info_t * sysInfo) +void get_sys_info (sys_info_t *sysInfo) { volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -43,7 +41,7 @@ void get_sys_info (sys_info_t * sysInfo) plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; - + switch(plat_ratio) { case 0x0: sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ; @@ -65,72 +63,77 @@ void get_sys_info (sys_info_t * sysInfo) break; } - // printf("assigned system bus freq = %d for plat ratio 0x%08lx\n", sysInfo->freqSystemBus, plat_ratio); +#if 0 + printf("assigned system bus freq = %d for plat ratio 0x%08lx\n", + sysInfo->freqSystemBus, plat_ratio); +#endif + e600_ratio = (gur->porpllsr) & 0x003f0000; e600_ratio >>= 16; - switch(e600_ratio) { + + switch (e600_ratio) { case 0x10: - sysInfo->freqProcessor = 2*sysInfo->freqSystemBus; + sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus; break; - case 0x19: - sysInfo->freqProcessor = 5*sysInfo->freqSystemBus/2; + case 0x19: + sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus/2; break; case 0x20: - sysInfo->freqProcessor = 3*sysInfo->freqSystemBus; + sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; break; case 0x39: - sysInfo->freqProcessor = 7*sysInfo->freqSystemBus/2; + sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus/2; break; case 0x28: - sysInfo->freqProcessor = 4*sysInfo->freqSystemBus; + sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus; break; case 0x1d: - sysInfo->freqProcessor = 9*sysInfo->freqSystemBus/2; + sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus/2; break; default: - /* JB - Emulator workaround until real cop is plugged in */ - sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; - //sysInfo->freqProcessor = 3*sysInfo->freqSystemBus; + /* JB - Emulator workaround until real cop is plugged in */ + /* sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; */ + sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; break; } - // printf("assigned processor freq = %d for e600 ratio 0x%08lx\n", sysInfo->freqProcessor, e600_ratio); - +#if 0 + printf("assigned processor freq = %d for e600 ratio 0x%08lx\n", + sysInfo->freqProcessor, e600_ratio); +#endif } -/* ------------------------------------------------------------------------- */ - /* * Measure CPU clock speed (core clock GCLK1, GCLK2) - * * (Approx. GCLK frequency in Hz) */ -int get_clocks (void) +int get_clocks(void) { DECLARE_GLOBAL_DATA_PTR; sys_info_t sys_info; - get_sys_info (&sys_info); + get_sys_info(&sys_info); gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; - - if(gd->cpu_clk != 0) return (0); - else return (1); + + if (gd->cpu_clk != 0) + return 0; + else + return 1; } -/* ------------------------------------------------------------------------- */ -/******************************************** + +/* * get_bus_freq - * return system bus freq in Hz - *********************************************/ -ulong get_bus_freq (ulong dummy) + * Return system bus freq in Hz + */ +ulong get_bus_freq(ulong dummy) { ulong val; - sys_info_t sys_info; - get_sys_info (&sys_info); + get_sys_info(&sys_info); val = sys_info.freqSystemBus; return val; @@ -138,111 +141,100 @@ ulong get_bus_freq (ulong dummy) unsigned long get_sysclk_from_px_regs() { - ulong val; - u8 vclkh,vclkl; - - vclkh = in8(PIXIS_BASE+PIXIS_VCLKH); - vclkl = in8(PIXIS_BASE+PIXIS_VCLKL); - - if((vclkh == 0x84) && (vclkl ==0x07)) - { - val = 33000000; - } - if((vclkh == 0x3F) && (vclkl ==0x20)) - { - val = 40000000; - } - if((vclkh == 0x3F) && (vclkl ==0x2A)) - { - val = 50000000; - } - if((vclkh == 0x24) && (vclkl ==0x04)) - { - val = 66000000; - } - if((vclkh == 0x3F) && (vclkl ==0x4B)) - { - val = 83000000; - } - if((vclkh == 0x3F) && (vclkl ==0x5C)) - { - val = 100000000; - } - if((vclkh == 0xDF) && (vclkl ==0x3B)) - { - val = 134000000; - } - if((vclkh == 0xDF) && (vclkl ==0x4B)) - { - val = 166000000; - } - - return val; + ulong val; + u8 vclkh, vclkl; + + vclkh = in8(PIXIS_BASE + PIXIS_VCLKH); + vclkl = in8(PIXIS_BASE + PIXIS_VCLKL); + + if ((vclkh == 0x84) && (vclkl == 0x07)) { + val = 33000000; + } + if ((vclkh == 0x3F) && (vclkl == 0x20)) { + val = 40000000; + } + if ((vclkh == 0x3F) && (vclkl == 0x2A)) { + val = 50000000; + } + if ((vclkh == 0x24) && (vclkl == 0x04)) { + val = 66000000; + } + if ((vclkh == 0x3F) && (vclkl == 0x4B)) { + val = 83000000; + } + if ((vclkh == 0x3F) && (vclkl == 0x5C)) { + val = 100000000; + } + if ((vclkh == 0xDF) && (vclkl == 0x3B)) { + val = 134000000; + } + if ((vclkh == 0xDF) && (vclkl == 0x4B)) { + val = 166000000; + } + + return val; } -/******* From MPC8641HPCN Design Workbook ************ - * + +/* * get_board_sys_clk - * reads the FPGA on board for CONFIG_SYS_CLK_FREQ - * - ********************************************************/ + * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ + */ unsigned long get_board_sys_clk(ulong dummy) { - u8 i, go_bit, rd_clks; - ulong val; - - go_bit = in8(PIXIS_BASE+PIXIS_VCTL); - go_bit &= 0x01; - - rd_clks = in8(PIXIS_BASE+PIXIS_VCFGEN0); - rd_clks &= 0x1C; - - /* Only if both go bit and the SCLK bit in VCFGEN0 are set - * should we be using the AUX register. Remember, we also set the - * GO bit to boot from the alternate bank on the on-board flash - */ - - if(go_bit) - { - if(rd_clks == 0x1c) - i = in8(PIXIS_BASE+PIXIS_AUX); - else - i = in8(PIXIS_BASE+PIXIS_SPD); - //val = get_sysclk_from_px_regs(); - } - else - i = in8(PIXIS_BASE+PIXIS_SPD); - - i &= 0x07; - - switch(i) - { - case 0: - val = 33000000; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66000000; - break; - case 4: - val = 83000000; - break; - case 5: - val = 100000000; - break; - case 6: - val = 134000000; - break; - case 7: - val = 166000000; - break; - } - - return val; + u8 i, go_bit, rd_clks; + ulong val; + + go_bit = in8(PIXIS_BASE + PIXIS_VCTL); + go_bit &= 0x01; + + rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0); + rd_clks &= 0x1C; + + /* + * Only if both go bit and the SCLK bit in VCFGEN0 are set + * should we be using the AUX register. Remember, we also set the + * GO bit to boot from the alternate bank on the on-board flash + */ + + if (go_bit) { + if (rd_clks == 0x1c) + i = in8(PIXIS_BASE + PIXIS_AUX); + else + i = in8(PIXIS_BASE + PIXIS_SPD); + } else { + i = in8(PIXIS_BASE + PIXIS_SPD); + } + + i &= 0x07; + + switch (i) { + case 0: + val = 33000000; + break; + case 1: + val = 40000000; + break; + case 2: + val = 50000000; + break; + case 3: + val = 66000000; + break; + case 4: + val = 83000000; + break; + case 5: + val = 100000000; + break; + case 6: + val = 134000000; + break; + case 7: + val = 166000000; + break; + } + + return val; } diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 531bd0c..0a447a7 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -783,12 +783,12 @@ ppcDcbz: dcbz r0,r3 blr -/*------------------------------------------------------------------------------- */ +/*-------------------------------------------------------------------------- */ /* Function: ppcSync */ /* Description: Processor Synchronize */ /* Input: none. */ /* Output: none. */ -/*------------------------------------------------------------------------------- */ +/*-------------------------------------------------------------------------- */ .globl ppcSync ppcSync: sync diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c index fdfc95d..8113dfb 100644 --- a/cpu/mpc86xx/traps.c +++ b/cpu/mpc86xx/traps.c @@ -1,6 +1,4 @@ /* - * linux/arch/ppc/kernel/traps.c - * * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 8d2e088..76efd7c 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -1,5 +1,6 @@ -/* - * Copyright 2004 Freescale Semiconductor. +/* + * Copyright 2006 Freescale Semiconductor. + * * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -22,8 +23,7 @@ */ /* - * mpc8641hpc3 board configuration file - * + * MPC8641HPCN board configuration file * * Make sure you change the MAC address and other network params first, * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. @@ -38,48 +38,38 @@ #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ #define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ -#undef DEBUG +#undef DEBUG -//#define RUN_DIAG 1 #ifdef RUN_DIAG #define CFG_DIAG_ADDR 0xff800000 #endif + #define CFG_RESET_ADDRESS 0xfff00100 -//#define CONFIG_PCI +#undef CONFIG_PCI + #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -/*#define CONFIG_DDR_ECC */ /* only for ECC DDR module */ -/*#define CONFIG_DDR_DLL */ /* possible DLL fix needed */ -#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ - +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_ALTIVEC 1 -#define CONFIG_ALTIVEC 1 -/*----------------------------------------------------------------------- +/* * L2CR setup -- make sure this is right for your board! */ - -#define CFG_L2 +#define CFG_L2 #define L2_INIT 0 #define L2_ENABLE (L2CR_L2E) #ifndef CONFIG_SYS_CLK_FREQ -//#define CONFIG_SYS_CLK_FREQ 33000000 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -/* JB - XXX - Are these available on 86xx? */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ - #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CFG_DRAM_TEST /* memory test, takes time */ @@ -130,10 +120,10 @@ #define CFG_DDR_INTERVAL 0x06090100 #define CFG_DDR_DATA_INIT 0xdeadbeef #define CFG_DDR_CLK_CTRL 0x03800000 - #define CFG_DDR_OCD_CTRL 0x00000000 - #define CFG_DDR_OCD_STATUS 0x00000000 + #define CFG_DDR_OCD_CTRL 0x00000000 + #define CFG_DDR_OCD_STATUS 0x00000000 #define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ - #define CFG_DDR_CONTROL2 0x04400000 + #define CFG_DDR_CONTROL2 0x04400000 //Not used in fixed_sdram function @@ -143,20 +133,12 @@ #define CFG_DDR_CS3_BNDS 0x00000FFF //Not done #define CFG_DDR_CS4_BNDS 0x00000FFF //Not done #define CFG_DDR_CS5_BNDS 0x00000FFF //Not done - - - #endif #endif /* - * SDRAM on the Local Bus - */ -//#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -//#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -/* In MPC8641HPCN, we allocate 16MB flash spaces at fe000000 and ff000000 + * In MPC8641HPCN, we allocate 16MB flash spaces at fe000000 and ff000000 * We only have an 8MB flash. In effect, the addresses from fe000000 to fe7fffff * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff. * However, when u-boot comes up, the flash_init needs hard start addresses @@ -165,15 +147,12 @@ * knows where the flash is and the user can download u-boot code from promjet to * fef00000 <- more intuitive than fe700000. Note that, on switching the boot * location, fef00000 becomes fff00000. -*/ + */ #define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */ -#define CFG_FLASH_BASE2 0xff800000 +#define CFG_FLASH_BASE2 0xff800000 #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} - -/*Sri: This looks like a good place to init all the Local Bus chip selects*/ - #define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */ #define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Boot Flash area*/ @@ -186,25 +165,24 @@ #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ -#define PIXIS_BASE 0xf8100000 /* PIXIS registers*/ -#define PIXIS_ID 0x0 /* MPC8641HPCN Board ID at offset 0*/ -#define PIXIS_VER 0x1 /* MPC8641HPCN board version version at offset 1*/ -#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2*/ -#define PIXIS_RST 0x4 /* PIXIS Reset Control register*/ -#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ -#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ -#define PIXIS_VCTL 0x10 /* VELA Control Register */ -#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ -#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ -#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ -#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ -#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ -#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ -#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ +#define PIXIS_BASE 0xf8100000 /* PIXIS registers */ +#define PIXIS_ID 0x0 /* Board ID at offset 0 */ +#define PIXIS_VER 0x1 /* Board version at offset 1 */ +#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ +#define PIXIS_RST 0x4 /* PIXIS Reset Control register */ +#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ +#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ +#define PIXIS_VCTL 0x10 /* VELA Control Register */ +#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ +#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ +#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ +#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ +#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ +#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ +#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ -//#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ #undef CFG_FLASH_CHECKSUM @@ -212,11 +190,9 @@ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ -/*#define CFG_HPCN_FLASH_CFI_DRIVER */ #define CFG_FLASH_CFI #define CFG_FLASH_EMPTY_INFO - #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else @@ -230,7 +206,7 @@ #undef CONFIG_CLOCKS_IN_MHZ #define CONFIG_L1_INIT_RAM -#undef CFG_INIT_RAM_LOCK +#undef CFG_INIT_RAM_LOCK #ifndef CFG_INIT_RAM_LOCK #define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ #else @@ -265,20 +241,22 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 +/* + * Pass open firmware flat tree to kernel + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 +#define OF_FLAT_TREE_MAX_SIZE 8192 -#define OF_CPU "PowerPC,8641@0" -#define OF_SOC "soc8641@f8000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500" +#define OF_CPU "PowerPC,8641@0" +#define OF_SOC "soc8641@f8000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500" -#define CFG_64BIT_VSPRINTF 1 -#define CFG_64BIT_STRTOUL 1 +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ @@ -297,13 +275,10 @@ * Addresses are mapped 1-1. */ #define CFG_PCI1_MEM_BASE 0x80000000 -//#define CFG_PCI1_MEM_BASE 0xd0000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0xe2000000 -//#define CFG_PCI1_IO_BASE 0xe0000000 #define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -//#define CFG_PCI1_IO_BUS 0x00000000 #define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ /* For RTL8139 */ @@ -316,29 +291,18 @@ #define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE #define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ -// #define CFG_PCI1_MEM_BASE 0x80000000 -// #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -// #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -// #define CFG_PCI1_IO_BASE 0xe2000000 -// #define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -// #define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ - - #if defined(CONFIG_PCI) - #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -//#define CFG_SCSI_SCAN_BUS_REVERSE - +#undef CFG_SCSI_SCAN_BUS_REVERSE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_RTL8139 - #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -349,7 +313,6 @@ #endif #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -//#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ #endif /* CONFIG_PCI */ @@ -371,7 +334,6 @@ #define CONFIG_MPC86XX_TSEC4 1 #define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4" - #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC3_PHY_ADDR 2 @@ -389,12 +351,10 @@ /* BAT0 2G Cacheable, non-guarded * 0x0000_0000 2G DDR */ -//#define CFG_DBAT0L (0x0 | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CFG_DBAT0L (0x0 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE | BATL_MEMCOHERENCE) -#define CFG_DBAT0U (0x0 | BATU_BL_512M | BATU_VS | BATU_VP) -//#define CFG_IBAT0L CFG_DBAT0L -//#define CFG_IBAT0L (0x0 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT0L (0x0| BATL_PP_RW | BATL_CACHEINHIBIT | BATL_MEMCOHERENCE) +#define CFG_DBAT0L ( BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE | BATL_MEMCOHERENCE ) +#define CFG_DBAT0U ( BATU_BL_512M | BATU_VS | BATU_VP ) +#define CFG_IBAT0L ( BATL_PP_RW | BATL_CACHEINHIBIT | BATL_MEMCOHERENCE) #define CFG_IBAT0U CFG_DBAT0U /* BAT1 1G Cache-inhibited, guarded @@ -402,7 +362,8 @@ * 0xa000_0000 512M PCI-Express 2 Memory ** SS - Changed it for operating from 0xd0000000 */ -#define CFG_DBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) #define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT1U CFG_DBAT1U @@ -410,7 +371,8 @@ /* BAT2 512M Cache-inhibited, guarded * 0xc000_0000 512M RapidIO Memory */ -#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) #define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT2U CFG_DBAT2U @@ -418,7 +380,8 @@ /* BAT3 4M Cache-inhibited, guarded * 0xf800_0000 4M CCSR */ -#define CFG_DBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) #define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT3U CFG_DBAT3U @@ -428,7 +391,8 @@ * 0xe300_0000 16M PCI-Express 2 I/0 ** SS - Note that this is at 0xe0000000 */ -#define CFG_DBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) #define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT4U CFG_DBAT4U @@ -444,12 +408,12 @@ /* BAT6 32M Cache-inhibited, guarded * 0xfe00_0000 32M FLASH */ -#define CFG_DBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6L ( CFG_FLASH_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CFG_DBAT6U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) #define CFG_IBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE) #define CFG_IBAT6U CFG_DBAT6U - #define CFG_DBAT7L 0x00000000 #define CFG_DBAT7U 0x00000000 #define CFG_IBAT7L 0x00000000 @@ -461,17 +425,17 @@ /* * Environment */ - #ifndef CFG_RAMBOOT - #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ - #define CFG_ENV_SIZE 0x2000 - #else - #define CFG_NO_FLASH 1 /* Flash is not usable now */ - #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) - #define CFG_ENV_SIZE 0x2000 - #endif +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -572,24 +536,25 @@ #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif -#define CONFIG_HAS_ETH1 1 -#define CONFIG_HAS_ETH2 1 -#define CONFIG_HAS_ETH3 1 +#define CONFIG_HAS_ETH1 1 +#define CONFIG_HAS_ETH2 1 +#define CONFIG_HAS_ETH3 1 -#define CONFIG_IPADDR 10.82.193.138 +#define CONFIG_IPADDR 10.82.193.138 #define CONFIG_HOSTNAME unknown #define CONFIG_ROOTPATH /opt/nfsroot #define CONFIG_BOOTFILE uImage -#define CONFIG_SERVERIP 10.82.193.104 -#define CONFIG_GATEWAYIP 10.82.193.254 -#define CONFIG_NETMASK 255.255.252.0 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 10.82.193.104 +#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 1000000 /* default location for tftp and bootm */ +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -//#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ +//#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200" #define CONFIG_BAUDRATE 115200 @@ -599,7 +564,7 @@ "consoledev=ttyS0\0" \ "ramdiskaddr=400000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ - "pex0=echo ---------------------------; echo --------- PCI EXPRESS -----\0" \ + "pex0=echo ---------------------------; echo --------- PCI EXPRESS -----\0"\ "pexstat=mw f8008000 84000004; echo -expect:- 16000000; md f8008004 1\0" \ "pex1=pci write 1.0.0 4 146; pci write 1.0.0 10 80000000\0" \ "pexd=echo -expect:- xxx01002 00100146; pci display 1.0.0 0 2\0" \ diff --git a/include/mpc86xx.h b/include/mpc86xx.h index 61b5279..4edeae1 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2006 Freescale Semiconductor. * Jeffrey Brown (jeffrey@freescale.com) * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) */ @@ -9,7 +9,7 @@ #define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */ -/*---------------------------------------------------------------- +/* * l2cr values. Look in config_.h for the actual setup */ #define l2cr 1017 @@ -23,7 +23,7 @@ #define L2CR_HWF 0x00000800 /* bit 20 - hardware flush */ #define L2CR_L2IP 0x00000001 /* global invalidate in progress */ -/*---------------------------------------------------------------- +/* * BAT settings. Look in config_.h for the actual setup */