sunxi: Create helper function veryfing valid boot signature on MMC

This patch extracts checking for valid SD card "eGON.BT0" signature from
`board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`.

Buffer for mmc sector is allocated and freed at runtime. `panic` is
triggered on malloc failure.

Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu>
CC: Roy Spliet <r.spliet@ultimaker.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
[hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0]
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
master
Daniel Kochmański 9 years ago committed by Hans de Goede
parent 1b26bab12e
commit 645c48f50e
  1. 1
      arch/arm/include/asm/arch-sunxi/mmc.h
  2. 8
      board/sunxi/board.c
  3. 17
      drivers/mmc/sunxi_mmc.c

@ -127,4 +127,5 @@ struct sunxi_mmc {
#define SUNXI_MMC_COMMON_RESET (1 << 18)
struct mmc *sunxi_mmc_init(int sdc_no);
int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc);
#endif /* _SUNXI_MMC_H */

@ -299,12 +299,8 @@ int board_mmc_init(bd_t *bis)
* Both mmc0 and mmc2 are bootable, figure out where we're booting
* from. Try mmc0 first, just like the brom does.
*/
if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
buf[12] = 0;
if (strcmp(&buf[4], "eGON.BT0") == 0)
return 0;
}
if (sunxi_mmc_has_egon_boot_signature(mmc0))
return 0;
/* no bootable card in mmc0, so we must be booting from mmc2, swap */
mmc0->block_dev.dev = 1;

@ -433,6 +433,23 @@ static int sunxi_mmc_getcd(struct mmc *mmc)
return !gpio_get_value(cd_pin);
}
int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc)
{
char *buf = malloc(512);
int valid_signature = 0;
if (buf == NULL)
panic("Failed to allocate memory\n");
if (mmc_getcd(mmc) && mmc_init(mmc) == 0 &&
mmc->block_dev.block_read(mmc->block_dev.dev, 16, 1, buf) == 1 &&
strncmp(&buf[4], "eGON.BT0", 8) == 0)
valid_signature = 1;
free(buf);
return valid_signature;
}
static const struct mmc_ops sunxi_mmc_ops = {
.send_cmd = sunxi_mmc_send_cmd,
.set_ios = sunxi_mmc_set_ios,

Loading…
Cancel
Save