Your ROOT_URL in app.ini is https://src.whiteboxsystems.nl/ but you are visiting http://src.whiteboxsystems.nl/Whitebox/u-boot/commit/6b3496f7babd0d1b1c30eb1b444246fc7b733a3b
You should set ROOT_URL correctly, otherwise the web may not work correctly.
1 changed files with
4 additions and
4 deletions
board/congatec/cgtqmx6eval/cgtqmx6eval.c
@ -34,12 +34,12 @@ int dram_init(void)
return 0 ;
}
iomux_v3_cfg_t const uart2_pads [ ] = {
static iomux_v3_cfg_t const uart2_pads [ ] = {
MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL ( UART_PAD_CTRL ) ,
MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL ( UART_PAD_CTRL ) ,
} ;
iomux_v3_cfg_t const usdhc2_pads [ ] = {
static iomux_v3_cfg_t const usdhc2_pads [ ] = {
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL ( USDHC_PAD_CTRL ) ,
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL ( USDHC_PAD_CTRL ) ,
MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL ( USDHC_PAD_CTRL ) ,
@ -49,7 +49,7 @@ iomux_v3_cfg_t const usdhc2_pads[] = {
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL ( USDHC_PAD_CTRL ) ,
} ;
iomux_v3_cfg_t const usdhc4_pads [ ] = {
static iomux_v3_cfg_t const usdhc4_pads [ ] = {
MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL ( USDHC_PAD_CTRL ) ,
MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL ( USDHC_PAD_CTRL ) ,
MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL ( USDHC_PAD_CTRL ) ,
@ -69,7 +69,7 @@ static void setup_iomux_uart(void)
}
# ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg usdhc_cfg [ ] = {
static st ruct fsl_esdhc_cfg usdhc_cfg [ ] = {
{ USDHC2_BASE_ADDR } ,
{ USDHC4_BASE_ADDR } ,
} ;
Otavio Salvador
10 years ago
committed by
Stefano Babic