Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ti816x: Import dts files from Linux Kernel v4.11

Browse Source 
This brings in the required dts/dtsi files for the TI8168-EVM from the
Linux Kernel v4.11 release.

Signed-off-by: Tom Rini <trini@konsulko.com>
master
Tom Rini 7 years ago
parent 77e99277a2
commit 708ca4daf9
4 changed files with 944 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      arch/arm/dts/Makefile
  2. 175
      arch/arm/dts/dm8168-evm.dts
  3. 250
      arch/arm/dts/dm816x-clocks.dtsi
  4. 518
      arch/arm/dts/dm816x.dtsi

1
arch/arm/dts/Makefile
Unescape View File

@ -146,6 +146,7 @@ dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
am43x-epos-evm.dtb \
am437x-idk-evm.dtb
dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \

175
arch/arm/dts/dm8168-evm.dts
Unescape View File

@ -0,0 +1,175 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "dm816x.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "DM8168 EVM";
compatible = "ti,dm8168-evm", "ti,dm8168";
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000 /* 1 GB */
0xc0000000 0x40000000>; /* 1 GB */
};
/* FDC6331L controlled by SD_POW pin */
vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&dm816x_pinmux {
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
>;
};
mmc_pins: pinmux_mmc_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
>;
};
usb0_pins: pinmux_usb0_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
>;
};
};
&i2c1 {
extgpio0: pcf8575@20 {
compatible = "nxp,pcf8575";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
&i2c2 {
extgpio1: pcf8575@20 {
compatible = "nxp,pcf8575";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
compatible = "ti,omap2-nand";
linux,mtd-name= "micron,mt29f2g16aadwp";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
nand-bus-width = <16>;
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <40>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
partition@0 {
label = "X-Loader";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
partition@0x1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
partition@0x280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
partition@0x780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
};
};
&mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
m25p80@0 {
compatible = "w25x32";
spi-max-frequency = <48000000>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc_pins>;
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
/* At least dm8168-evm rev c won't support multipoint, later may */
&usb0 {
pinctrl-names = "default";
pinctrl-0 = <&usb0_pins>;
mentor,multipoint = <0>;
};
&usb1 {
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins>;
mentor,multipoint = <0>;
};

250
arch/arm/dts/dm816x-clocks.dtsi
Unescape View File

@ -0,0 +1,250 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
&scrm {
main_fapll: main_fapll {
#clock-cells = <1>;
compatible = "ti,dm816-fapll-clock";
reg = <0x400 0x40>;
clocks = <&sys_clkin_ck &sys_clkin_ck>;
clock-indices = <1>, <2>, <3>, <4>, <5>,
<6>, <7>;
clock-output-names = "main_pll_clk1",
"main_pll_clk2",
"main_pll_clk3",
"main_pll_clk4",
"main_pll_clk5",
"main_pll_clk6",
"main_pll_clk7";
};
ddr_fapll: ddr_fapll {
#clock-cells = <1>;
compatible = "ti,dm816-fapll-clock";
reg = <0x440 0x30>;
clocks = <&sys_clkin_ck &sys_clkin_ck>;
clock-indices = <1>, <2>, <3>, <4>;
clock-output-names = "ddr_pll_clk1",
"ddr_pll_clk2",
"ddr_pll_clk3",
"ddr_pll_clk4";
};
video_fapll: video_fapll {
#clock-cells = <1>;
compatible = "ti,dm816-fapll-clock";
reg = <0x470 0x30>;
clocks = <&sys_clkin_ck &sys_clkin_ck>;
clock-indices = <1>, <2>, <3>;
clock-output-names = "video_pll_clk1",
"video_pll_clk2",
"video_pll_clk3";
};
audio_fapll: audio_fapll {
#clock-cells = <1>;
compatible = "ti,dm816-fapll-clock";
reg = <0x4a0 0x30>;
clocks = <&main_fapll 7>, < &sys_clkin_ck>;
clock-indices = <1>, <2>, <3>, <4>, <5>;
clock-output-names = "audio_pll_clk1",
"audio_pll_clk2",
"audio_pll_clk3",
"audio_pll_clk4",
"audio_pll_clk5";
};
};
&scrm_clocks {
secure_32k_ck: secure_32k_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
sys_32k_ck: sys_32k_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
tclkin_ck: tclkin_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
sys_clkin_ck: sys_clkin_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <27000000>;
};
};
/* 0x48180000 */
&prcm_clocks {
clkout_pre_ck: clkout_pre_ck@100 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
&audio_fapll 1>;
reg = <0x100>;
};
clkout_div_ck: clkout_div_ck@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout_pre_ck>;
ti,bit-shift = <3>;
ti,max-div = <8>;
reg = <0x100>;
};
clkout_ck: clkout_ck@100 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout_div_ck>;
ti,bit-shift = <7>;
reg = <0x100>;
};
/* CM_DPLL clocks p1795 */
sysclk1_ck: sysclk1_ck@300 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 1>;
ti,max-div = <7>;
reg = <0x0300>;
};
sysclk2_ck: sysclk2_ck@304 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 2>;
ti,max-div = <7>;
reg = <0x0304>;
};
sysclk3_ck: sysclk3_ck@308 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 3>;
ti,max-div = <7>;
reg = <0x0308>;
};
sysclk4_ck: sysclk4_ck@30c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 4>;
ti,max-div = <1>;
reg = <0x030c>;
};
sysclk5_ck: sysclk5_ck@310 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sysclk4_ck>;
ti,max-div = <1>;
reg = <0x0310>;
};
sysclk6_ck: sysclk6_ck@314 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 4>;
ti,dividers = <2>, <4>;
reg = <0x0314>;
};
sysclk10_ck: sysclk10_ck@324 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&ddr_fapll 2>;
ti,max-div = <7>;
reg = <0x0324>;
};
sysclk24_ck: sysclk24_ck@3b4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 5>;
ti,max-div = <7>;
reg = <0x03b4>;
};
mpu_ck: mpu_ck@15dc {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sysclk2_ck>;
ti,bit-shift = <1>;
reg = <0x15dc>;
};
audio_pll_a_ck: audio_pll_a_ck@35c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&audio_fapll 1>;
ti,max-div = <7>;
reg = <0x035c>;
};
sysclk18_ck: sysclk18_ck@378 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
reg = <0x0378>;
};
timer1_fck: timer1_fck@390 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0390>;
};
timer2_fck: timer2_fck@394 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0394>;
};
timer3_fck: timer3_fck@398 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0398>;
};
timer4_fck: timer4_fck@39c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x039c>;
};
timer5_fck: timer5_fck@3a0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x03a0>;
};
timer6_fck: timer6_fck@3a4 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x03a4>;
};
timer7_fck: timer7_fck@3a8 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x03a8>;
};
};

518
arch/arm/dts/dm816x.dtsi
Unescape View File

@ -0,0 +1,518 @@
/*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/omap.h>
/ {
compatible = "ti,dm816";
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
ethernet0 = &eth0;
ethernet1 = &eth1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a8";
device_type = "cpu";
reg = <0>;
};
};
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
};
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap3-mpu";
ti,hwmods = "mpu";
};
};
/*
* XXX: Use a flat representation of the dm816x interconnect.
* The real dm816x interconnect network is quite complex. Since
* it will not bring real advantage to represent that in DT
* for the moment, just use a fake OCP bus entry to represent
* the whole bus hierarchy.
*/
ocp {
compatible = "simple-bus";
reg = <0x44000000 0x10000>;
interrupts = <9 10>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
prcm: prcm@48180000 {
compatible = "ti,dm816-prcm";
reg = <0x48180000 0x4000>;
prcm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
prcm_clockdomains: clockdomains {
};
};
scrm: scrm@48140000 {
compatible = "ti,dm816-scrm", "simple-bus";
reg = <0x48140000 0x21000>;
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
ranges = <0 0x48140000 0x21000>;
dm816x_pinmux: pinmux@800 {
compatible = "pinctrl-single";
reg = <0x800 0x50a>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xf>;
};
/* Device Configuration Registers */
scm_conf: syscon@600 {
compatible = "syscon", "simple-bus";
reg = <0x600 0x110>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x600 0x110>;
usb_phy0: usb-phy@20 {
compatible = "ti,dm8168-usb-phy";
reg = <0x20 0x8>;
reg-names = "phy";
clocks = <&main_fapll 6>;
clock-names = "refclk";
#phy-cells = <0>;
syscon = <&scm_conf>;
};
usb_phy1: usb-phy@28 {
compatible = "ti,dm8168-usb-phy";
reg = <0x28 0x8>;
reg-names = "phy";
clocks = <&main_fapll 6>;
clock-names = "refclk";
#phy-cells = <0>;
syscon = <&scm_conf>;
};
};
scrm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
scrm_clockdomains: clockdomains {
};
};
edma: edma@49000000 {
compatible = "ti,edma3";
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
reg = <0x49000000 0x10000>,
<0x44e10f90 0x40>;
interrupts = <12 13 14>;
#dma-cells = <1>;
};
elm: elm@48080000 {
compatible = "ti,816-elm";
ti,hwmods = "elm";
reg = <0x48080000 0x2000>;
interrupts = <4>;
};
gpio1: gpio@48032000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
ti,gpio-always-on;
reg = <0x48032000 0x1000>;
interrupts = <96>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
ti,gpio-always-on;
reg = <0x4804c000 0x1000>;
interrupts = <98>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
reg = <0x50000000 0x2000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <100>;
dmas = <&edma 52>;
dma-names = "rxtx";
gpmc,num-cs = <6>;
gpmc,num-waitpins = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
i2c1: i2c@48028000 {
compatible = "ti,omap4-i2c";
ti,hwmods = "i2c1";
reg = <0x48028000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <70>;
dmas = <&edma 58 &edma 59>;
dma-names = "tx", "rx";
};
i2c2: i2c@4802a000 {
compatible = "ti,omap4-i2c";
ti,hwmods = "i2c2";
reg = <0x4802a000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <71>;
dmas = <&edma 60 &edma 61>;
dma-names = "tx", "rx";
};
intc: interrupt-controller@48200000 {
compatible = "ti,dm816-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x48200000 0x1000>;
};
rtc: rtc@480c0000 {
compatible = "ti,am3352-rtc", "ti,da830-rtc";
reg = <0x480c0000 0x1000>;
interrupts = <75 76>;
ti,hwmods = "rtc";
};
mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480c8000 0x2000>;
interrupts = <77>;
ti,hwmods = "mailbox";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
mbox_dsp: mbox_dsp {
ti,mbox-tx = <3 0 0>;
ti,mbox-rx = <0 0 0>;
};
};
spinbox: spinbox@480ca000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x480ca000 0x2000>;
ti,hwmods = "spinbox";
#hwlock-cells = <1>;
};
mdio: mdio@4a100800 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4a100800 0x100>;
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
phy0: ethernet-phy@0 {
reg = <1>;
};
phy1: ethernet-phy@1 {
reg = <2>;
};
};
eth0: ethernet@4a100000 {
compatible = "ti,dm816-emac";
ti,hwmods = "emac0";
reg = <0x4a100000 0x800
0x4a100900 0x3700>;
clocks = <&sysclk24_ck>;
syscon = <&scm_conf>;
ti,davinci-ctrl-reg-offset = <0>;
ti,davinci-ctrl-mod-reg-offset = <0x900>;
ti,davinci-ctrl-ram-offset = <0x2000>;
ti,davinci-ctrl-ram-size = <0x2000>;
interrupts = <40 41 42 43>;
phy-handle = <&phy0>;
};
eth1: ethernet@4a120000 {
compatible = "ti,dm816-emac";
ti,hwmods = "emac1";
reg = <0x4a120000 0x4000>;
clocks = <&sysclk24_ck>;
syscon = <&scm_conf>;
ti,davinci-ctrl-reg-offset = <0>;
ti,davinci-ctrl-mod-reg-offset = <0x900>;
ti,davinci-ctrl-ram-offset = <0x2000>;
ti,davinci-ctrl-ram-size = <0x2000>;
interrupts = <44 45 46 47>;
phy-handle = <&phy1>;
};
mcspi1: spi@48030000 {
compatible = "ti,omap4-mcspi";
reg = <0x48030000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <65>;
ti,spi-num-cs = <4>;
ti,hwmods = "mcspi1";
dmas = <&edma 16 &edma 17
&edma 18 &edma 19
&edma 20 &edma 21
&edma 22 &edma 23>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
};
mmc1: mmc@48060000 {
compatible = "ti,omap4-hsmmc";
reg = <0x48060000 0x11000>;
ti,hwmods = "mmc1";
interrupts = <64>;
dmas = <&edma 24 &edma 25>;
dma-names = "tx", "rx";
};
timer1: timer@4802e000 {
compatible = "ti,dm816-timer";
reg = <0x4802e000 0x2000>;
interrupts = <67>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
timer2: timer@48040000 {
compatible = "ti,dm816-timer";
reg = <0x48040000 0x2000>;
interrupts = <68>;
ti,hwmods = "timer2";
};
timer3: timer@48042000 {
compatible = "ti,dm816-timer";
reg = <0x48042000 0x2000>;
interrupts = <69>;
ti,hwmods = "timer3";
};
timer4: timer@48044000 {
compatible = "ti,dm816-timer";
reg = <0x48044000 0x2000>;
interrupts = <92>;
ti,hwmods = "timer4";
ti,timer-pwm;
};
timer5: timer@48046000 {
compatible = "ti,dm816-timer";
reg = <0x48046000 0x2000>;
interrupts = <93>;
ti,hwmods = "timer5";
ti,timer-pwm;
};
timer6: timer@48048000 {
compatible = "ti,dm816-timer";
reg = <0x48048000 0x2000>;
interrupts = <94>;
ti,hwmods = "timer6";
ti,timer-pwm;
};
timer7: timer@4804a000 {
compatible = "ti,dm816-timer";
reg = <0x4804a000 0x2000>;
interrupts = <95>;
ti,hwmods = "timer7";
ti,timer-pwm;
};
uart1: uart@48020000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart1";
reg = <0x48020000 0x2000>;
clock-frequency = <48000000>;
interrupts = <72>;
dmas = <&edma 26 &edma 27>;
dma-names = "tx", "rx";
};
uart2: uart@48022000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart2";
reg = <0x48022000 0x2000>;
clock-frequency = <48000000>;
interrupts = <73>;
dmas = <&edma 28 &edma 29>;
dma-names = "tx", "rx";
};
uart3: uart@48024000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart3";
reg = <0x48024000 0x2000>;
clock-frequency = <48000000>;
interrupts = <74>;
dmas = <&edma 30 &edma 31>;
dma-names = "tx", "rx";
};
/* NOTE: USB needs a transceiver driver for phys to work */
usb: usb_otg_hs@47401000 {
compatible = "ti,am33xx-usb";
reg = <0x47401000 0x400000>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
ti,hwmods = "usb_otg_hs";
usb0: usb@47401000 {
compatible = "ti,musb-dm816";
reg = <0x47401400 0x400
0x47401000 0x200>;
reg-names = "mc", "control";
interrupts = <18>;
interrupt-names = "mc";
dr_mode = "host";
interface-type = <0>;
phys = <&usb_phy0>;
phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
mentor,power = <500>;
dmas = <&cppi41dma 0 0 &cppi41dma 1 0
&cppi41dma 2 0 &cppi41dma 3 0
&cppi41dma 4 0 &cppi41dma 5 0
&cppi41dma 6 0 &cppi41dma 7 0
&cppi41dma 8 0 &cppi41dma 9 0
&cppi41dma 10 0 &cppi41dma 11 0
&cppi41dma 12 0 &cppi41dma 13 0
&cppi41dma 14 0 &cppi41dma 0 1
&cppi41dma 1 1 &cppi41dma 2 1
&cppi41dma 3 1 &cppi41dma 4 1
&cppi41dma 5 1 &cppi41dma 6 1
&cppi41dma 7 1 &cppi41dma 8 1
&cppi41dma 9 1 &cppi41dma 10 1
&cppi41dma 11 1 &cppi41dma 12 1
&cppi41dma 13 1 &cppi41dma 14 1>;
dma-names =
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
"rx14", "rx15",
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
"tx14", "tx15";
};
usb1: usb@47401800 {
compatible = "ti,musb-dm816";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
interrupts = <19>;
interrupt-names = "mc";
dr_mode = "host";
interface-type = <0>;
phys = <&usb_phy1>;
phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
mentor,power = <500>;
dmas = <&cppi41dma 15 0 &cppi41dma 16 0
&cppi41dma 17 0 &cppi41dma 18 0
&cppi41dma 19 0 &cppi41dma 20 0
&cppi41dma 21 0 &cppi41dma 22 0
&cppi41dma 23 0 &cppi41dma 24 0
&cppi41dma 25 0 &cppi41dma 26 0
&cppi41dma 27 0 &cppi41dma 28 0
&cppi41dma 29 0 &cppi41dma 15 1
&cppi41dma 16 1 &cppi41dma 17 1
&cppi41dma 18 1 &cppi41dma 19 1
&cppi41dma 20 1 &cppi41dma 21 1
&cppi41dma 22 1 &cppi41dma 23 1
&cppi41dma 24 1 &cppi41dma 25 1
&cppi41dma 26 1 &cppi41dma 27 1
&cppi41dma 28 1 &cppi41dma 29 1>;
dma-names =
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
"rx14", "rx15",
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
"tx14", "tx15";
};
cppi41dma: dma-controller@47402000 {
compatible = "ti,am3359-cppi41";
reg = <0x47400000 0x1000
0x47402000 0x1000
0x47403000 0x1000
0x47404000 0x4000>;
reg-names = "glue", "controller", "scheduler", "queuemgr";
interrupts = <17>;
interrupt-names = "glue";
#dma-cells = <2>;
#dma-channels = <30>;
#dma-requests = <256>;
};
};
wd_timer2: wd_timer@480c2000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer";
reg = <0x480c2000 0x1000>;
interrupts = <0>;
};
};
};
#include "dm816x-clocks.dtsi"
Write Preview
Loading…
Cancel
Save