ARM: legoev3: remove unused configuration options

This removes the unused clock and RAM config options that were cargo-
culted when this board was copied from the DA850 EVM.

Signed-off-by: David Lechner <david@lechnology.com>

include/configs/legoev3.h

@@ -39,60 +39,6 @@
 
 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
 
-#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (	\
-	DAVINCI_SYSCFG_SUSPSRC_TIMER0 |		\
-	DAVINCI_SYSCFG_SUSPSRC_SPI0 |		\
-	DAVINCI_SYSCFG_SUSPSRC_UART1 |		\
-	DAVINCI_SYSCFG_SUSPSRC_I2C)
-
-/*
- * PLL configuration
- */
-
-#define CONFIG_SYS_DA850_PLL0_PLLM     24
-#define CONFIG_SYS_DA850_PLL1_PLLM     21
-
-/*
- * DDR2 memory configuration
- */
-#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
-					DV_DDR_PHY_EXT_STRBEN | \
-					(0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDBCR (		\
-	(1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) |	\
-	(1 << DV_DDR_SDCR_DDREN_SHIFT) |	\
-	(1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |	\
-	(1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |	\
-	(0x3 << DV_DDR_SDCR_CL_SHIFT) |		\
-	(0x2 << DV_DDR_SDCR_IBANK_SHIFT) |	\
-	(0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
-
-/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
-#define CONFIG_SYS_DA850_DDR2_SDBCR2 0
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR (		\
-	(14 << DV_DDR_SDTMR1_RFC_SHIFT) |	\
-	(2 << DV_DDR_SDTMR1_RP_SHIFT) |		\
-	(2 << DV_DDR_SDTMR1_RCD_SHIFT) |	\
-	(1 << DV_DDR_SDTMR1_WR_SHIFT) |		\
-	(5 << DV_DDR_SDTMR1_RAS_SHIFT) |	\
-	(8 << DV_DDR_SDTMR1_RC_SHIFT) |		\
-	(1 << DV_DDR_SDTMR1_RRD_SHIFT) |	\
-	(0 << DV_DDR_SDTMR1_WTR_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (		\
-	(7 << DV_DDR_SDTMR2_RASMAX_SHIFT) |	\
-	(0 << DV_DDR_SDTMR2_XP_SHIFT) |		\
-	(0 << DV_DDR_SDTMR2_ODT_SHIFT) |	\
-	(17 << DV_DDR_SDTMR2_XSNR_SHIFT) |	\
-	(199 << DV_DDR_SDTMR2_XSRD_SHIFT) |	\
-	(0 << DV_DDR_SDTMR2_RTP_SHIFT) |	\
-	(0 << DV_DDR_SDTMR2_CKE_SHIFT))
-
-#define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000494
-#define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
-
 /*
  * Serial Driver info
  */