apalis/colibri_t30: fix MMC/SD card detect GPIOs

This fixes the MMC/SD card detect GPIOs for Apalis T30 which got broken
by the following commit:

2b2b50bc87 "dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs"

While at it also re-add the comments describing which particular
Apalis/Colibri pins those GPIOs are on.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

arch/arm/dts/tegra30-apalis.dts

@@ -247,13 +247,15 @@
 	sdhci@78000000 {
 		status = "okay";
 		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
 	};
 
 	sdhci@78000400 {
 		status = "okay";
 		bus-width = <8>;
-		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
 	};
 
 	sdhci@78000600 {
@@ -266,12 +268,14 @@
 	usb@7d000000 {
 		status = "okay";
 		dr_mode = "peripheral";
+		/* USBO1_EN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
 	};
 
 	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
 	usb@7d004000 {
 		status = "okay";
+		/* USBH_EN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		phy_type = "utmi";
 	};
@@ -279,6 +283,7 @@
 	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
 	usb@7d008000 {
 		status = "okay";
+		/* USBH_EN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 	};
 

arch/arm/dts/tegra30-colibri.dts

@@ -64,7 +64,7 @@
 	sdhci@78000200 {
 		status = "okay";
 		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
 	};
 
 	sdhci@78000600 {
@@ -83,12 +83,14 @@
 	usb@7d004000 {
 		status = "okay";
 		phy_type = "utmi";
+		/* VBUS_LAN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
 	};
 
 	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
 	usb@7d008000 {
 		status = "okay";
+		/* USBH_PEN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 	};
 };