Kconfig: Move CONFIG_FIT and related options to Kconfig

There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>

Kconfig

@@ -177,6 +177,10 @@ config FIT
 	  images of various types (kernel, FDT blob, ramdisk, etc.)
 	  in a single blob.  To boot this new uImage structure,
 	  pass the address of the blob to the "bootm" command.
+	  FIT is very flexible, supporting compression, multiple images,
+	  multiple configurations, verification through hashing and also
+	  verified boot (secure boot using RSA). This option enables that
+	  feature.
 
 config FIT_VERBOSE
 	bool "Display verbose messages on FIT boot"
@@ -191,8 +195,62 @@ config FIT_SIGNATURE
 	  This option enables signature verification of FIT uImages,
 	  using a hash signed and verified using RSA. If
 	  CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
-	  hashing is available using hardware, RSA library will use it.
-	  See doc/uImage.FIT/signature.txt for more details.
+	  hashing is available using hardware, then then RSA library will use
+	  it. See doc/uImage.FIT/signature.txt for more details.
+
+	  WARNING: When relying on signed FIT images with a required signature
+	  check the legacy image format is disabled by default, so that
+	  unsigned images cannot be loaded. If a board needs the legacy image
+	  format support in this case, enable it using
+	  CONFIG_IMAGE_FORMAT_LEGACY.
+
+config FIT_BEST_MATCH
+	bool "Select the best match for the kernel device tree"
+	depends on FIT
+	help
+	  When no configuration is explicitly selected, default to the
+	  one whose fdt's compatibility field best matches that of
+	  U-Boot itself. A match is considered "best" if it matches the
+	  most specific compatibility entry of U-Boot's fdt's root node.
+	  The order of entries in the configuration's fdt is ignored.
+
+config FIT_VERBOSE
+	bool "Show verbose messages when FIT images fails"
+	depends on FIT
+	help
+	  Generally a system will have valid FIT images so debug messages
+	  are a waste of code space. If you are debugging your images then
+	  you can enable this option to get more verbose information about
+	  failures.
+
+config OF_BOARD_SETUP
+	bool "Set up board-specific details in device tree before boot"
+	depends on OF_LIBFDT
+	help
+	  This causes U-Boot to call ft_board_setup() before booting into
+	  the Operating System. This function can set up various
+	  board-specific information in the device tree for use by the OS.
+	  The device tree is then passed to the OS.
+
+config OF_SYSTEM_SETUP
+	bool "Set up system-specific details in device tree before boot"
+	depends on OF_LIBFDT
+	help
+	  This causes U-Boot to call ft_system_setup() before booting into
+	  the Operating System. This function can set up various
+	  system-specific information in the device tree for use by the OS.
+	  The device tree is then passed to the OS.
+
+config OF_STDOUT_VIA_ALIAS
+	bool "Update the device-tree stdout alias from U-Boot"
+	depends on OF_LIBFDT
+	help
+	  This uses U-Boot's serial alias from the aliases node to update
+	  the device tree passed to the OS. The "linux,stdout-path" property
+	  in the chosen node is set to point to the correct serial node.
+	  This option currently references CONFIG_CONS_INDEX, which is
+	  incorrect when used with device tree as this option does not
+	  exist / should not be used.
 
 config SYS_EXTRA_OPTIONS
 	string "Extra Options (DEPRECATED)"

README

@@ -3093,20 +3093,6 @@ CBFS (Coreboot Filesystem) support
 		will set it back to normal.  This command currently
 		supports i.MX53 and i.MX6.
 
-- Signing support:
-		CONFIG_RSA
-
-		This enables the RSA algorithm used for FIT image verification
-		in U-Boot. See doc/uImage.FIT/signature.txt for more information.
-
-		The Modular Exponentiation algorithm in RSA is implemented using
-		driver model. So CONFIG_DM needs to be enabled by default for this
-		library to function.
-
-		The signing part is build into mkimage regardless of this
-		option. The software based modular exponentiation is built into
-		mkimage irrespective of this option.
-
 - bootcount support:
 		CONFIG_BOOTCOUNT_LIMIT
 
@@ -3306,33 +3292,14 @@ FIT uImage format:
 		enabled per default for backward compatibility.
 
 - FIT image support:
-		CONFIG_FIT
-		Enable support for the FIT uImage format.
-
-		CONFIG_FIT_BEST_MATCH
-		When no configuration is explicitly selected, default to the
-		one whose fdt's compatibility field best matches that of
-		U-Boot itself. A match is considered "best" if it matches the
-		most specific compatibility entry of U-Boot's fdt's root node.
-		The order of entries in the configuration's fdt is ignored.
-
-		CONFIG_FIT_SIGNATURE
-		This option enables signature verification of FIT uImages,
-		using a hash signed and verified using RSA. If
-		CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
-		hashing is available using hardware, RSA library will use it.
-		See doc/uImage.FIT/signature.txt for more details.
-
-		WARNING: When relying on signed FIT images with required
-		signature check the legacy image format is default
-		disabled. If a board need legacy image format support
-		enable this through CONFIG_IMAGE_FORMAT_LEGACY
-
 		CONFIG_FIT_DISABLE_SHA256
 		Supporting SHA256 hashes has quite an impact on binary size.
 		For constrained systems sha256 hash support can be disabled
 		with this option.
 
+		TODO(sjg@chromium.org): Adjust this option to be positive,
+		and move it to Kconfig
+
 - Standalone program support:
 		CONFIG_STANDALONE_LOAD_ADDR
 

arch/arm/include/asm/fsl_secure_boot.h

@@ -20,7 +20,6 @@
 #define CONFIG_CMD_BLOB
 #define CONFIG_FSL_SEC_MON
 #define CONFIG_SHA_PROG_HW_ACCEL
-#define CONFIG_RSA
 #define CONFIG_RSA_FREESCALE_EXP
 
 #ifndef CONFIG_FSL_CAAM

arch/microblaze/lib/bootm.c

@@ -10,6 +10,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <fdt_support.h>
 #include <image.h>
 #include <u-boot/zlib.h>
 #include <asm/byteorder.h>

arch/powerpc/include/asm/fsl_secure_boot.h

@@ -76,7 +76,6 @@
 #define CONFIG_CMD_BLOB
 #define CONFIG_FSL_SEC_MON
 #define CONFIG_SHA_PROG_HW_ACCEL
-#define CONFIG_RSA
 #define CONFIG_RSA_FREESCALE_EXP
 
 #ifndef CONFIG_FSL_CAAM

board/freescale/ls1043aqds/eth.c

@@ -7,9 +7,11 @@
 #include <common.h>
 #include <asm/io.h>
 #include <netdev.h>
+#include <fdt_support.h>
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <fsl_dtsec.h>
+#include <libfdt.h>
 #include <malloc.h>
 #include <asm/arch/fsl_serdes.h>
 

board/freescale/ls1043ardb/ls1043ardb.c

@@ -10,6 +10,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
+#include <fdt_support.h>
 #include <hwconfig.h>
 #include <ahci.h>
 #include <mmc.h>

board/vscom/baltos/board.c

@@ -10,6 +10,7 @@
 
 #include <common.h>
 #include <errno.h>
+#include <libfdt.h>
 #include <spl.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/hardware.h>

cmd/disk.c

@@ -22,7 +22,7 @@ int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
 #endif
 	block_dev_desc_t *dev_desc;
 
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 	const void *fit_hdr = NULL;
 #endif
 
@@ -82,7 +82,7 @@ int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
 		cnt = image_get_image_size(hdr);
 		break;
 #endif
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 	case IMAGE_FORMAT_FIT:
 		fit_hdr = (const void *) addr;
 		puts("Fit image detected...\n");
@@ -108,7 +108,7 @@ int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
 	}
 	bootstage_mark(BOOTSTAGE_ID_IDE_READ);
 
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 	/* This cannot be done earlier,
 	 * we need complete FIT image in RAM first */
 	if (genimg_get_format((void *) addr) == IMAGE_FORMAT_FIT) {

common/Makefile

@@ -132,8 +132,8 @@ endif
 obj-y += image.o
 obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o
 obj-$(CONFIG_OF_LIBFDT) += image-fdt.o
-obj-$(CONFIG_FIT) += image-fit.o
-obj-$(CONFIG_FIT_SIGNATURE) += image-sig.o
+obj-$(CONFIG_$(SPL_)FIT) += image-fit.o
+obj-$(CONFIG_$(SPL_)FIT_SIGNATURE) += image-sig.o
 obj-$(CONFIG_IO_TRACE) += iotrace.o
 obj-y += memsize.o
 obj-y += stdio.o

common/bootm.c

@@ -108,7 +108,7 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc,
 		images.os.arch = image_get_arch(os_hdr);
 		break;
 #endif
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	case IMAGE_FORMAT_FIT:
 		if (fit_image_get_type(images.fit_hdr_os,
 				       images.fit_noffset_os,
@@ -180,7 +180,7 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc,
 		/* Kernel entry point is the setup.bin */
 	} else if (images.legacy_hdr_valid) {
 		images.ep = image_get_ep(&images.legacy_hdr_os_copy);
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	} else if (images.fit_uname_os) {
 		int ret;
 
@@ -245,7 +245,7 @@ int bootm_find_images(int flag, int argc, char * const argv[])
 	set_working_fdt_addr((ulong)images.ft_addr);
 #endif
 
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	/* find all of the loadables */
 	ret = boot_get_loadable(argc, argv, &images, IH_ARCH_DEFAULT,
 			       NULL, NULL);
@@ -788,7 +788,7 @@ static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
 	const void *buf;
 	const char	*fit_uname_config = NULL;
 	const char	*fit_uname_kernel = NULL;
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	int		os_noffset;
 #endif
 
@@ -849,7 +849,7 @@ static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
 		bootstage_mark(BOOTSTAGE_ID_DECOMP_IMAGE);
 		break;
 #endif
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	case IMAGE_FORMAT_FIT:
 		os_noffset = fit_image_load(images, img_addr,
 				&fit_uname_kernel, &fit_uname_config,

common/image-fdt.c

@@ -231,7 +231,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
 	ulong		fdt_addr;
 	char		*fdt_blob = NULL;
 	void		*buf;
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 	const char	*fit_uname_config = images->fit_uname_cfg;
 	const char	*fit_uname_fdt = NULL;
 	ulong		default_addr;
@@ -246,7 +246,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
 	if (argc > 2)
 		select = argv[2];
 	if (select || genimg_has_config(images)) {
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 		if (select) {
 			/*
 			 * If the FDT blob comes from the FIT image and the
@@ -276,7 +276,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
 				debug("*  fdt: cmdline image address = 0x%08lx\n",
 				      fdt_addr);
 			}
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 		} else {
 			/* use FIT configuration provided in first bootm
 			 * command argument
@@ -351,7 +351,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
 			 * (libfdt based) and raw FDT blob (also libfdt
 			 * based).
 			 */
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 			/* check FDT blob vs FIT blob */
 			if (fit_check_format(buf)) {
 				ulong load, len;

common/image-fit.c

@@ -1101,8 +1101,9 @@ int fit_all_image_verify(const void *fit)
 			 * Direct child node of the images parent node,
 			 * i.e. component image node.
 			 */
-			printf("   Hash(es) for Image %u (%s): ", count++,
+			printf("   Hash(es) for Image %u (%s): ", count,
 			       fit_get_name(fit, noffset, NULL));
+			count++;
 
 			if (!fit_image_verify(fit, noffset))
 				return 0;

common/image.c

@@ -29,7 +29,7 @@
 #include <image.h>
 #include <mapmem.h>
 
-#if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT)
+#if IMAGE_ENABLE_FIT || defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #include <fdt_support.h>
 #endif
@@ -707,7 +707,7 @@ ulong genimg_get_kernel_addr_fit(char * const img_addr,
 		kernel_addr = load_addr;
 		debug("*  kernel: default image load address = 0x%08lx\n",
 		      load_addr);
-#if defined(CONFIG_FIT)
+#if CONFIG_IS_ENABLED(FIT)
 	} else if (fit_parse_conf(img_addr, load_addr, &kernel_addr,
 				  fit_uname_config)) {
 		debug("*  kernel: config '%s' from image at 0x%08lx\n",
@@ -762,7 +762,7 @@ int genimg_get_format(const void *img_addr)
 	if (image_check_magic(hdr))
 		return IMAGE_FORMAT_LEGACY;
 #endif
-#if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT)
+#if IMAGE_ENABLE_FIT || defined(CONFIG_OF_LIBFDT)
 	if (fdt_check_header(img_addr) == 0)
 		return IMAGE_FORMAT_FIT;
 #endif
@@ -799,7 +799,7 @@ ulong genimg_get_image(ulong img_addr)
 
 		/* get header size */
 		h_size = image_get_header_size();
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 		if (sizeof(struct fdt_header) > h_size)
 			h_size = sizeof(struct fdt_header);
 #endif
@@ -821,7 +821,7 @@ ulong genimg_get_image(ulong img_addr)
 					ram_addr, d_size);
 			break;
 #endif
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 		case IMAGE_FORMAT_FIT:
 			d_size = fit_get_size(buf) - h_size;
 			debug("   FIT/FDT format image found at 0x%08lx, "
@@ -862,7 +862,7 @@ ulong genimg_get_image(ulong img_addr)
  */
 int genimg_has_config(bootm_headers_t *images)
 {
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	if (images->fit_uname_cfg)
 		return 1;
 #endif
@@ -903,7 +903,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
 #ifdef CONFIG_SUPPORT_RAW_INITRD
 	char *end;
 #endif
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	const char	*fit_uname_config = images->fit_uname_cfg;
 	const char	*fit_uname_ramdisk = NULL;
 	ulong		default_addr;
@@ -934,7 +934,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
 		debug("## Skipping init Ramdisk\n");
 		rd_len = rd_data = 0;
 	} else if (select || genimg_has_config(images)) {
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 		if (select) {
 			/*
 			 * If the init ramdisk comes from the FIT image and
@@ -965,7 +965,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
 						"0x%08lx\n",
 						rd_addr);
 			}
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 		} else {
 			/* use FIT configuration provided in first bootm
 			 * command argument. If the property is not defined,
@@ -1008,7 +1008,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
 			rd_load = image_get_load(rd_hdr);
 			break;
 #endif
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 		case IMAGE_FORMAT_FIT:
 			rd_noffset = fit_image_load(images,
 					rd_addr, &fit_uname_ramdisk,
@@ -1184,14 +1184,14 @@ error:
 int boot_get_setup(bootm_headers_t *images, uint8_t arch,
 		   ulong *setup_start, ulong *setup_len)
 {
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 	return boot_get_setup_fit(images, arch, setup_start, setup_len);
 #else
 	return -ENOENT;
 #endif
 }
 
-#if defined(CONFIG_FIT)
+#if IMAGE_ENABLE_FIT
 int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images,
 		uint8_t arch, const ulong *ld_start, ulong * const ld_len)
 {

configs/10m50_defconfig

@@ -4,6 +4,7 @@ CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard"
 CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_BOOTD is not set

configs/3c120_defconfig

@@ -4,6 +4,7 @@ CONFIG_DM_SERIAL=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
 CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
 # CONFIG_CMD_BOOTD is not set

configs/A10-OLinuXino-Lime_defconfig

@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/A10s-OLinuXino-M_defconfig

@@ -9,6 +9,7 @@ CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/A13-OLinuXinoM_defconfig

@@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/A13-OLinuXino_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/A20-OLinuXino-Lime2_defconfig

@@ -8,6 +8,7 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/A20-OLinuXino-Lime_defconfig

@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/A20-OLinuXino_MICRO_defconfig

@@ -9,6 +9,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/A20-Olimex-SOM-EVB_defconfig

@@ -11,6 +11,7 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Ainol_AW1_defconfig

@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set

configs/Ampe_A76_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Auxtek-T003_defconfig

@@ -8,6 +8,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set

configs/Auxtek-T004_defconfig

@@ -6,6 +6,7 @@ CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set

configs/B4420QDS_NAND_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
 CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y

configs/B4420QDS_SPIFLASH_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y

configs/B4420QDS_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y

configs/B4860QDS_NAND_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
 CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y

configs/B4860QDS_SECURE_BOOT_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/B4860QDS_SPIFLASH_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y

configs/B4860QDS_SRIO_PCIE_BOOT_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/B4860QDS_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SST=y

configs/BSC9131RDB_NAND_SYSCLK100_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9131RDB=y
 CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/BSC9131RDB_NAND_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9131RDB=y
 CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9131RDB=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH,SYS_CLK_100"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/BSC9131RDB_SPIFLASH_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9131RDB=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_NAND_DDRCLK100_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_NAND_DDRCLK133_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_NOR_DDRCLK100_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_NOR_DDRCLK133_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -10,4 +14,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y

configs/Bananapi_defconfig

@@ -7,6 +7,7 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Bananapro_defconfig

@@ -9,6 +9,7 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
@@ -16,5 +17,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 CONFIG_CMD_GPIO=y
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_AXP_ALDO4_VOLT=2500
+CONFIG_USB_EHCI_HCD=y

configs/C29XPCIE_NAND_defconfig

@@ -3,6 +3,10 @@ CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
 CONFIG_SPL=y
 CONFIG_TPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,NAND"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_EON=y

configs/C29XPCIE_NOR_SECBOOT_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -11,4 +15,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig

@@ -2,6 +2,10 @@ CONFIG_PPC=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT"
 CONFIG_DM=y
 CONFIG_SPI_FLASH=y
@@ -11,4 +15,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_FSL_ESPI=y
+CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y

configs/C29XPCIE_SPIFLASH_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_EON=y

configs/C29XPCIE_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_EON=y

configs/CHIP_defconfig

@@ -6,6 +6,7 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_GPIO=y

configs/CPCI4052_defconfig

@@ -1,6 +1,7 @@
 CONFIG_PPC=y
 CONFIG_4xx=y
 CONFIG_TARGET_CPCI4052=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "

configs/CSQ_CS908_defconfig

@@ -7,6 +7,7 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Chuwi_V7_CW0825_defconfig

@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set

configs/Colombus_defconfig

@@ -17,6 +17,7 @@ CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Cubieboard2_defconfig

@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Cubieboard_defconfig

@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Cubietruck_defconfig

@@ -11,6 +11,7 @@ CONFIG_GMAC_TX_DELAY=1
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Cyrus_P5020_defconfig

@@ -2,6 +2,9 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_CYRUS=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5020"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Cyrus_P5040_defconfig

@@ -2,6 +2,9 @@ CONFIG_PPC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_CYRUS=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000,PPC_P5040"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Empire_electronix_d709_defconfig

@@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Hummingbird_A31_defconfig

@@ -9,6 +9,7 @@ CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Hyundai_A7HD_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set

configs/Lamobo_R1_defconfig

@@ -7,6 +7,7 @@ CONFIG_GMAC_TX_DELAY=4
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Linksprite_pcDuino3_Nano_defconfig

@@ -8,6 +8,7 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Linksprite_pcDuino3_defconfig

@@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=122
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/Linksprite_pcDuino_defconfig

@@ -6,6 +6,7 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/MK808C_defconfig

@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=384
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set

configs/MPC8308RDB_defconfig

@@ -1,6 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8308RDB=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC8313ERDB_33_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8313ERDB=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ"
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set

configs/MPC8313ERDB_66_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8313ERDB=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ"
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set

configs/MPC8313ERDB_NAND_33_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8313ERDB=y
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ,NAND"
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set

configs/MPC8313ERDB_NAND_66_defconfig

@@ -2,6 +2,8 @@ CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8313ERDB=y
 CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ,NAND"
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set

configs/MPC8315ERDB_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8315ERDB=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC8323ERDB_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8323ERDB=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC832XEMDS_ATM_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC832XEMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y

configs/MPC832XEMDS_HOST_33_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC832XEMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_33M,PQ_MDS_PIB=1"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y

configs/MPC832XEMDS_HOST_66_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC832XEMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_66M,PQ_MDS_PIB=1"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y

configs/MPC832XEMDS_SLAVE_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC832XEMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PCI,PCISLAVE"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y

configs/MPC832XEMDS_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC832XEMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC8349EMDS_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8349EMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC8349ITXGP_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8349ITX=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000"
 CONFIG_SYS_PROMPT="MPC8349E-mITX-GP> "
 # CONFIG_CMD_SETEXPR is not set

configs/MPC8349ITX_LOWBOOT_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8349ITX=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX,SYS_TEXT_BASE=0xFE000000"
 CONFIG_SYS_PROMPT="MPC8349E-mITX> "
 # CONFIG_CMD_SETEXPR is not set

configs/MPC8349ITX_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC8349ITX=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX"
 CONFIG_SYS_PROMPT="MPC8349E-mITX> "
 # CONFIG_CMD_SETEXPR is not set

configs/MPC837XEMDS_HOST_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC837XEMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="PCI"
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y

configs/MPC837XEMDS_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC837XEMDS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y

configs/MPC837XERDB_defconfig

@@ -1,6 +1,8 @@
 CONFIG_PPC=y
 CONFIG_MPC83xx=y
 CONFIG_TARGET_MPC837XERDB=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y