Merge git://git.denx.de/u-boot-dm

Kconfig

@@ -56,6 +56,25 @@ config CC_OPTIMIZE_FOR_SIZE
 
 	  This option is enabled by default for U-Boot.
 
+config SYS_MALLOC_F
+	bool "Enable malloc() pool before relocation"
+	default 0x400
+	help
+	  Before relocation memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+	hex "Size of malloc() pool before relocation"
+	depends on SYS_MALLOC_F
+	default 0x400
+	help
+	  Before relocation memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
+
 menuconfig EXPERT
         bool "Configure standard U-Boot features (expert users)"
         help
@@ -118,6 +137,7 @@ config FIT_VERBOSE
 config FIT_SIGNATURE
 	bool "Enable signature verification of FIT uImages"
 	depends on FIT
+	depends on DM
 	select RSA
 	help
 	  This option enables signature verification of FIT uImages,
@@ -165,3 +185,5 @@ source "drivers/Kconfig"
 source "fs/Kconfig"
 
 source "lib/Kconfig"
+
+source "test/Kconfig"

arch/Kconfig

@@ -40,6 +40,7 @@ config OPENRISC
 config PPC
 	bool "PowerPC architecture"
 	select HAVE_PRIVATE_LIBGCC
+	select SUPPORT_OF_CONTROL
 
 config SANDBOX
 	bool "Sandbox"

arch/arm/Kconfig

@@ -839,6 +839,8 @@ endchoice
 
 source "arch/arm/cpu/arm926ejs/davinci/Kconfig"
 
+source "arch/arm/cpu/arm1176/bcm2835/Kconfig"
+
 source "arch/arm/cpu/armv7/exynos/Kconfig"
 
 source "arch/arm/cpu/armv7/highbank/Kconfig"

arch/arm/cpu/arm1176/bcm2835/Kconfig

@@ -0,0 +1,12 @@
+if TARGET_RPI
+
+config DM
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+endif

arch/arm/cpu/armv7/exynos/Kconfig

@@ -65,6 +65,27 @@ endchoice
 config SYS_SOC
 	default "exynos"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
+config DM_SPI
+	default y if !SPL_BUILD
+
+config DM_SPI_FLASH
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config SYS_MALLOC_F
+	default y if !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if !SPL_BUILD
+
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"

arch/arm/cpu/armv7/omap3/Kconfig

@@ -93,6 +93,21 @@ config TARGET_TWISTER
 
 endchoice
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if DM && !SPL_BUILD
+
+config DM_SERIAL
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if DM && !SPL_BUILD
+
 config SYS_SOC
 	default "omap3"
 

arch/arm/cpu/armv7/tegra-common/Kconfig

@@ -17,9 +17,33 @@ config TEGRA124
 
 endchoice
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x1800
+
 config USE_PRIVATE_LIBGCC
 	default y if SPL_BUILD
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
+config DM_SPI
+	default y if !SPL_BUILD
+
+config DM_SPI_FLASH
+	default y if !SPL_BUILD
+
+config DM_I2C
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
 source "arch/arm/cpu/armv7/tegra20/Kconfig"
 source "arch/arm/cpu/armv7/tegra30/Kconfig"
 source "arch/arm/cpu/armv7/tegra114/Kconfig"

arch/arm/cpu/armv7/uniphier/Kconfig

@@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD
 
 endchoice
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
 config CMD_PINMON
 	bool "Enable boot mode pins monitor command"
 	default y

arch/arm/include/asm/arch-at91/at91_pio.h

@@ -114,14 +114,10 @@ typedef union at91_pio {
 		at91_port_t	pioa;
 		at91_port_t	piob;
 		at91_port_t	pioc;
-	#if (ATMEL_PIO_PORTS > 3)
+		at91_port_t	piod;	/* not present in all hardware */
-		at91_port_t	piod;
+		at91_port_t	pioe;/* not present in all hardware */
-	#endif
+	};
-	#if (ATMEL_PIO_PORTS > 4)
+	at91_port_t port[5];
-		at91_port_t	pioe;
-	#endif
-	} ;
-	at91_port_t port[ATMEL_PIO_PORTS];
 } at91_pio_t;
 
 #ifdef CONFIG_AT91_GPIO

arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c

@@ -424,6 +424,14 @@ phys_size_t initdram(int board_type)
 	int write_recovery;
 	phys_size_t dram_size = 0;
 
+	if (IS_ENABLED(CONFIG_SYS_RAMBOOT)) {
+		/*
+		 * Reduce RAM size to avoid overwriting memory used by
+		 * current stack? Not sure what is happening.
+		 */
+		return sdram_memsize() / 2;
+	}
+
 	num_dimm_banks = sizeof(iic0_dimm_addr);
 
 	/*------------------------------------------------------------------

arch/powerpc/cpu/ppc4xx/config.mk

@@ -7,10 +7,7 @@
 
 PLATFORM_CPPFLAGS += -mstring -msoft-float
 
-cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h
+ifneq (,$(CONFIG_440))
-is440:=$(shell grep CONFIG_440 $(cfg))
-
-ifneq (,$(findstring CONFIG_440,$(is440)))
 PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
 else
 PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405

arch/powerpc/cpu/ppc4xx/cpu_init.c

@@ -450,10 +450,12 @@ cpu_init_f (void)
 	      PLB4Ax_ACR_RDP_4DEEP);
 #endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
 
+#ifndef CONFIG_SYS_GENERIC_BOARD
 	gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset((void *)gd, 0, sizeof(gd_t));
+#endif
 }
 
 /*

arch/powerpc/cpu/ppc4xx/start.S

@@ -760,6 +760,15 @@ _start:
 #endif
 
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
+#ifdef CONFIG_SYS_GENERIC_BOARD
+	mr	r3, r1
+	bl	board_init_f_mem
+	mr	r1, r3
+	li	r0,0
+	stwu	r0, -4(r1)
+	stwu	r0, -4(r1)
+#endif
+	li	r3, 0
 	bl	board_init_f
 	/* NOTREACHED - board_init_f() does not return */
 
@@ -1027,7 +1036,14 @@ _start:
 	GET_GOT			/* initialize GOT access			*/
 
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
-
+#ifdef CONFIG_SYS_GENERIC_BOARD
+	mr	r3, r1
+	bl	board_init_f_mem
+	mr	r1, r3
+	stwu	r0, -4(r1)
+	stwu	r0, -4(r1)
+#endif
+	li	r3, 0
 	bl	board_init_f	/* run first part of init code (from Flash)	*/
 	/* NOTREACHED - board_init_f() does not return */
 

arch/powerpc/cpu/ppc4xx/u-boot.lds

@@ -76,9 +76,13 @@ SECTIONS
   . = ALIGN(256);
   __init_begin = .;
   .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
+  .data.init : {
+	*(.data.init)
 	. = ALIGN(256);
+	LONG(0) LONG(0)		/* Extend u-boot.bin to here */
+  }
   __init_end = .;
+  _end = .;
 
 #ifndef CONFIG_SPL
 #ifdef CONFIG_440

arch/powerpc/dts/Makefile

@@ -0,0 +1,11 @@
+dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+	@:
+
+clean-files := *.dtb

arch/powerpc/dts/arches.dts

@@ -0,0 +1,339 @@
+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ *   Stefan Roese <sr@denx.de>
+ *   Copyright 2008 DENX Software Engineering
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,arches";
+	compatible = "amcc,arches";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <3>;
+			num-rx-chans = <24>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x02000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x01b60000>;
+					};
+					partition@1f60000 {
+						label = "env";
+						reg = <0x01f60000 0x00040000>;
+					};
+					partition@1fa0000 {
+						label = "u-boot";
+						reg = <0x01fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sttm@4a {
+					compatible = "ad,ad7414";
+					reg = <0x4a>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x0 0x8>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "sgmii";
+				phy-map = <0xffffffff>;
+				gpcs-address = <0x0000000a>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000000>;
+				gpcs-address = <0x0000000b>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "sgmii";
+				phy-map = <0x00000001>;
+				gpcs-address = <0x0000000C>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+};

arch/powerpc/dts/canyonlands.dts

@@ -0,0 +1,561 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,canyonlands";
+	compatible = "amcc,canyonlands";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	chosen {
+		stdout-path = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460ex";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460ex";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x160 0x003>;
+		unused-units = <0x00000100>;
+		idle-doze = <0x02000000>;
+		standby = <0xfeff791d>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460ex", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		HWRNG: hwrng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <16>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+		};
+
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
+
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
+
+		USBOTG0: usbotg@bff80000 {
+			compatible = "amcc,dwc-otg";
+			reg = <0x4 0xbff80000 0x10000>;
+			interrupt-parent = <&USBOTG0>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x1 0x2>;
+			interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+					 /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+					 /* DMA */ 0x2 &UIC0 0xc 0x4>;
+		};
+
+		SATA0: sata@bffd1000 {
+			compatible = "amcc,sata-460ex";
+			reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
+			interrupt-parent = <&UIC3>;
+			interrupts = <0x0 0x4       /* SATA */
+				      0x5 0x4>;     /* AHBDMA */
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				cpld@2,0 {
+					compatible = "amcc,ppc460ex-bcsr";
+					reg = <2 0x0 0x9>;
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				reg-shift = <0>;
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				reg-shift = <0>;
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "stm,m41t80";
+                                        reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+                                };
+                                sttm@48 {
+                                        compatible = "ad,ad7414";
+                                        reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+                                };
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				gpio-controller;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460ex", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <0x80 0xbf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = < 0xC 0x10000000 0x100>;
+			sdr-base = <0x36C>;
+			msi-data = <0x00000000>;
+			msi-mask = <0x44440000>;
+			interrupt-count = <3>;
+			interrupts = <0 1 2 3>;
+			interrupt-parent = <&UIC3>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &UIC3 0x18 1
+					1 &UIC3 0x19 1
+					2 &UIC3 0x1A 1
+					3 &UIC3 0x1B 1>;
+		};
+	};
+};

arch/powerpc/dts/glacier.dts

@@ -0,0 +1,582 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,glacier";
+	compatible = "amcc,glacier";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	chosen {
+		stdout-path = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto",
+				"amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		HWRNG: hwrng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				reg-shift = <0>;
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				reg-shift = <0>;
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				reg-shift = <0>;
+				compatible = "ns16550";
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <28 0x4>;
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				reg-shift = <0>;
+				compatible = "ns16550";
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <29 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+				};
+				sttm@48 {
+					compatible = "ad,ad7414";
+					reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460gt", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef601600 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <0xef601600 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef601200 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
+				reg = <0xef601200 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <24>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <0x80 0xbf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+		};
+	};
+};

arch/powerpc/include/asm/arch-ppc4xx/gpio.h

@@ -0,0 +1,7 @@
+/*
+ * (C) Copyright 2014 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* This is empty for now as we don't support the generic GPIO interface */

arch/powerpc/include/asm/linkage.h

@@ -0,0 +1,7 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* We don't need anything here at present */

arch/powerpc/include/asm/ppc460ex_gt.h

@@ -19,10 +19,12 @@
 /* Memory mapped registers */
 #define CONFIG_SYS_PERIPHERAL_BASE	0xef600000 /* Internal Peripherals */
 
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
 #define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
+#endif
 
 #define GPIO0_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
 #define GPIO1_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)

arch/sandbox/Kconfig

@@ -10,4 +10,28 @@ config SYS_BOARD
 config SYS_CONFIG_NAME
 	default "sandbox"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
+config DM_CROS_EC
+	default y
+
+config DM_SPI
+	default y
+
+config DM_SPI_FLASH
+	default y
+
+config DM_I2C
+	default y
+
+config DM_TEST
+	default y
+
 endmenu

arch/x86/Kconfig

@@ -67,6 +67,21 @@ config TARGET_GALILEO
 
 endchoice
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x800
+
 config RAMBASE
 	hex
 	default 0x100000

board/amcc/canyonlands/Kconfig

@@ -9,4 +9,42 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "canyonlands"
 
+choice BOARD_TYPE
+	prompt "Select which board to build for"
+
+config CANYONLANDS
+	bool "Glacier"
+	help
+	  Select this to build for the Canyonlands 460EX board.
+
+config GLACIER
+	bool "Glacier"
+	help
+	  Select this to build for the Glacier 460GT board.
+
+config ARCHES
+	bool "Arches"
+	help
+	  Select this to build for the Arches dual 460GT board.
+
+endchoice
+
+config DISPLAY_BOARDINFO
+	bool
+	default y
+
+config DM
+	default y
+
+config DM_SERIAL
+	default y
+
+config SYS_MALLOC_F
+	bool
+	default y
+
+config SYS_MALLOC_F_LEN
+	hex
+	default 0x400
+
 endif

board/amcc/canyonlands/MAINTAINERS

@@ -6,3 +6,4 @@ F:	include/configs/canyonlands.h
 F:	configs/arches_defconfig
 F:	configs/canyonlands_defconfig
 F:	configs/glacier_defconfig
+F:	configs/glacier_ramboot_defconfig

board/amcc/canyonlands/config.mk

@@ -8,8 +8,6 @@
 # AMCC 460EX/460GT Evaluation Board (Canyonlands) board
 #
 
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG
 endif

board/amcc/canyonlands/u-boot-ram.lds

@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .text      :
+  {
+    _image_copy_start = .;
+    arch/powerpc/cpu/ppc4xx/start.o	(.text*)
+    board/amcc/canyonlands/init.o	(.text*)
+
+    *(.text*)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    KEEP(*(.got))
+    _GOT2_TABLE_ = .;
+    KEEP(*(.got2))
+    _FIXUP_TABLE_ = .;
+    KEEP(*(.fixup))
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data*)
+    *(.sdata*)
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+
+  .u_boot_list : {
+	KEEP(*(SORT(.u_boot_list*)));
+  }
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : {
+	*(.data.init)
+	. = ALIGN(256);
+	LONG(0) LONG(0)		/* Extend u-boot.bin to here */
+  }
+  __init_end = .;
+  _end = .;
+  _image_binary_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.bss*)
+   *(.sbss*)
+   *(COMMON)
+   . = ALIGN(4);
+  }
+
+  __bss_end = . ;
+  PROVIDE (end = .);
+}

board/compulab/cm_t335/Kconfig

@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "cm_t335"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
 endif

board/gumstix/pepper/Kconfig

@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "pepper"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
 endif

board/isee/igep0033/Kconfig

@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "am335x_igep0033"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
 endif

board/phytec/pcm051/Kconfig

@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "pcm051"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
 endif

board/samsung/goni/Kconfig

@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "s5p_goni"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
 endif

board/samsung/smdk5420/Kconfig

@@ -22,6 +22,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "peach-pi"
 
+config DM_CROS_EC
+	default y
+
 endif
 
 if TARGET_PEACH_PIT
@@ -35,6 +38,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "peach-pit"
 
+config DM_CROS_EC
+	default y
+
 endif
 
 if TARGET_SMDK5420

board/samsung/smdkc100/Kconfig

@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "smdkc100"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
 endif

board/silica/pengwyn/Kconfig

@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "pengwyn"
 
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if !SPL_BUILD
+
+config DM_SERIAL
+	default y if !SPL_BUILD
+
 endif

board/ti/am335x/Kconfig

@@ -37,4 +37,20 @@ config NOR_BOOT
 	  booted via NOR.  In this case we will enable certain pinmux early
 	  as the ROM only partially sets up pinmux.  We also default to using
 	  NOR for environment.
+
+config DM
+	default y if !SPL_BUILD
+
+config DM_GPIO
+	default y if DM && !SPL_BUILD
+
+config DM_SERIAL
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if DM && !SPL_BUILD
+
 endif

common/Kconfig

@@ -153,6 +153,29 @@ endmenu
 
 menu "Device access commands"
 
+config CMD_DM
+	bool "dm - Access to driver model information"
+	depends on DM
+	default y
+	help
+	  Provides access to driver model data structures and information,
+	  such as a list of devices, list of uclasses and the state of each
+	  device (e.g. activated). This is not required for operation, but
+	  can be useful to see the state of driver model for debugging or
+	  interest.
+
+config CMD_DEMO
+	bool "demo - Demonstration commands for driver model"
+	depends on DM
+	help
+	  Provides a 'demo' command which can be used to play around with
+	  driver model. To use this properly you will need to enable one or
+	  both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+	  Otherwise you will always get an empty list of devices. The demo
+	  devices are defined in the sandbox device tree, so the easiest
+	  option is to use sandbox and pass the -d point to sandbox's
+	  u-boot.dtb file.
+
 config CMD_LOADB
 	bool "loadb"
 	help

common/board_f.c

@@ -1075,4 +1075,22 @@ void board_init_f_r(void)
 	/* NOTREACHED - board_init_r() does not return */
 	hang();
 }
+#else
+ulong board_init_f_mem(ulong top)
+{
+	/* Leave space for the stack we are running with now */
+	top -= 0x40;
+
+	top -= sizeof(struct global_data);
+	top = ALIGN(top, 16);
+	gd = (struct global_data *)top;
+	memset((void *)gd, '\0', sizeof(*gd));
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+	top -= CONFIG_SYS_MALLOC_F_LEN;
+	gd->malloc_base = top;
+#endif
+
+	return top;
+}
 #endif /* CONFIG_X86 */

common/cmd_demo.c

@@ -97,7 +97,9 @@ static int do_demo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				ARRAY_SIZE(demo_commands));
 	argc -= 2;
 	argv += 2;
-	if (!demo_cmd || argc > demo_cmd->maxargs)
+
+	if ((!demo_cmd || argc > demo_cmd->maxargs) ||
+	    ((demo_cmd->name[0] != 'l') && (argc < 1)))
 		return CMD_RET_USAGE;
 
 	if (argc) {

common/cmd_i2c.c

@@ -1730,7 +1730,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
 #endif
 	if (argc == 1) {
 #ifdef CONFIG_DM_I2C
-		speed = i2c_get_bus_speed(bus);
+		speed = dm_i2c_get_bus_speed(bus);
 #else
 		speed = i2c_get_bus_speed();
 #endif
@@ -1740,7 +1740,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
 		speed = simple_strtoul(argv[1], NULL, 10);
 		printf("Setting bus speed to %d Hz\n", speed);
 #ifdef CONFIG_DM_I2C
-		ret = i2c_set_bus_speed(bus, speed);
+		ret = dm_i2c_set_bus_speed(bus, speed);
 #else
 		ret = i2c_set_bus_speed(speed);
 #endif

common/malloc_simple.c

@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
 
 	new_ptr = gd->malloc_ptr + bytes;
 	if (new_ptr > gd->malloc_limit)
-		panic("Out of pre-reloc memory");
+		return NULL;
 	ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
 	gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
 	return ptr;

configs/Linksprite_pcDuino3_fdt_defconfig

@@ -2,6 +2,8 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
 CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
 CONFIG_OF_CONTROL=y
 CONFIG_OF_SEPARATE=y
@@ -11,3 +13,5 @@ CONFIG_OF_SEPARATE=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=122
 +S:CONFIG_DRAM_EMR1=4
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/am335x_igep0033_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/am3517_crane_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_AM3517_CRANE=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/am3517_evm_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_AM3517_EVM=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/arches_defconfig

@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="ARCHES"
 CONFIG_PPC=y
 CONFIG_4xx=y
 CONFIG_TARGET_CANYONLANDS=y
+CONFIG_ARCHES=y
+CONFIG_DEFAULT_DEVICE_TREE="arches"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y

configs/canyonlands_defconfig

@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="CANYONLANDS"
 CONFIG_PPC=y
 CONFIG_4xx=y
 CONFIG_TARGET_CANYONLANDS=y
+CONFIG_CANYONLANDS=y
+CONFIG_DEFAULT_DEVICE_TREE="canyonlands"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y

configs/cm_fx6_defconfig

@@ -2,3 +2,8 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_CM_FX6=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/cm_t335_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_CM_T335=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/cm_t3517_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=n
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_CM_T3517=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/cm_t35_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_CM_T35=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/devkit8000_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_DEVKIT8000=y
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y

configs/dig297_defconfig

@@ -1,3 +1,6 @@
 CONFIG_ARM=y
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_DIG297=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/eco5pk_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_ECO5PK=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/glacier_defconfig

@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="GLACIER"
 CONFIG_PPC=y
 CONFIG_4xx=y
 CONFIG_TARGET_CANYONLANDS=y
+CONFIG_GLACIER=y
+CONFIG_DEFAULT_DEVICE_TREE="glacier"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y

configs/glacier_ramboot_defconfig

@@ -0,0 +1,8 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/canyonlands/u-boot-ram.lds"
+CONFIG_PPC=y
+CONFIG_4xx=y
+CONFIG_TARGET_CANYONLANDS=y
+CONFIG_GLACIER=y
+CONFIG_DEFAULT_DEVICE_TREE="glacier"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y

configs/gwventana_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mcx_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_MCX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/mt_ventoux_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_MT_VENTOUX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/mx6dlsabreauto_defconfig

@@ -1,3 +1,7 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y

configs/mx6dlsabresd_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y

configs/mx6qsabreauto_defconfig

@@ -1,3 +1,7 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y

configs/mx6qsabrelite_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE"
 CONFIG_ARM=y
 CONFIG_TARGET_NITROGEN6X=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y

configs/mx6qsabresd_defconfig

@@ -1,3 +1,7 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y

configs/mx6sabresd_spl_defconfig

@@ -2,4 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_MX6SABRESD=y
-
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y

configs/mx6sxsabresd_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/nokia_rx51_defconfig

@@ -1,3 +1,8 @@
 CONFIG_ARM=y
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_NOKIA_RX51=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/omap3_beagle_defconfig

@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND"
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_OMAP3_BEAGLE=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y

configs/omap3_evm_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_OMAP3_EVM=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/omap3_evm_quick_mmc_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/omap3_evm_quick_nand_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/omap3_ha_defconfig

@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA"
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_TAO3530=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/omap3_logic_defconfig

@@ -1,3 +1,6 @@
 CONFIG_ARM=y
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_OMAP3_LOGIC=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/omap3_mvblx_defconfig

@@ -1,3 +1,6 @@
 CONFIG_ARM=y
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_OMAP3_MVBLX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/omap3_pandora_defconfig

@@ -1,3 +1,6 @@
 CONFIG_ARM=y
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_OMAP3_PANDORA=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/omap3_sdp3430_defconfig

@@ -1,3 +1,6 @@
 CONFIG_ARM=y
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_OMAP3_SDP3430=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/pcm051_rev1_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV1"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pcm051_rev3_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV3"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pengwyn_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PENGWYN=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pepper_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PEPPER=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/rpi_defconfig

@@ -1,2 +1,4 @@
 CONFIG_ARM=y
 CONFIG_TARGET_RPI=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/s5p_goni_defconfig

@@ -2,3 +2,5 @@ CONFIG_ARM=y
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_TARGET_S5P_GONI=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/sandbox_defconfig

@@ -5,3 +5,5 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_DM=y
 CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/smdkc100_defconfig

@@ -2,3 +2,5 @@ CONFIG_ARM=y
 CONFIG_TARGET_SMDKC100=y
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/snapper9260_defconfig

@@ -1,3 +1,8 @@
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
 CONFIG_ARM=y
 CONFIG_TARGET_SNAPPER9260=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/snapper9g20_defconfig

@@ -1,3 +1,8 @@
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20"
 CONFIG_ARM=y
 CONFIG_TARGET_SNAPPER9260=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/socfpga_socrates_defconfig

@@ -3,3 +3,6 @@ CONFIG_SPL=y
 +S:CONFIG_TARGET_SOCFPGA_CYCLONE5=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates"
+CONFIG_DM=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y

configs/stv0991_defconfig

@@ -1,3 +1,7 @@
 CONFIG_SYS_EXTRA_OPTIONS="stv0991"
 CONFIG_ARM=y
 CONFIG_TARGET_STV0991=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y

configs/tao3530_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_TAO3530=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/tricorder_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_TRICORDER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/tricorder_flash_defconfig

@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD"
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_TRICORDER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

configs/twister_defconfig

@@ -2,3 +2,6 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_OMAP34XX=y
 +S:CONFIG_TARGET_TWISTER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n

doc/driver-model/spi-howto.txt

@@ -40,8 +40,8 @@ with only minor changes:
 
 Add these to your board config:
 
-#define CONFIG_DM_SPI
+CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
+CONFIG_DM_SPI_FLASH
 
 
 2. Add the skeleton

drivers/Kconfig

@@ -2,6 +2,8 @@ menu "Device Drivers"
 
 source "drivers/core/Kconfig"
 
+source "drivers/demo/Kconfig"
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
@@ -48,4 +50,6 @@ source "drivers/dma/Kconfig"
 
 source "drivers/crypto/Kconfig"
 
+source "drivers/thermal/Kconfig"
+
 endmenu

drivers/core/Kconfig

@@ -2,5 +2,51 @@ config DM
 	bool "Enable Driver Model"
 	depends on !SPL_BUILD
 	help
-	  This config option enables Driver Model.
+	  This config option enables Driver Model. This brings in the core
-	  To use legacy drivers, say N.
+	  support, including scanning of platform data on start-up. If
+	  CONFIG_OF_CONTROL is enabled, the device tree will be scanned also
+	  when available.
+
+config SPL_DM
+	bool "Enable Driver Model for SPL"
+	depends on DM && SPL
+	help
+	  Enable driver model in SPL. You will need to provide a
+	  suitable malloc() implementation. If you are not using the
+	  full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
+	  consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
+	  must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+	  In most cases driver model will only allocate a few uclasses
+	  and devices in SPL, so 1KB should be enable. See
+	  CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
+
+config DM_WARN
+	bool "Enable warnings in driver model"
+	help
+	  The dm_warn() function can use up quite a bit of space for its
+	  strings. By default this is disabled for SPL builds to save space.
+	  This will cause dm_warn() to be compiled out - it will do nothing
+	  when called.
+	depends on DM
+	default y if !SPL_BUILD
+	default n if SPL_BUILD
+
+config DM_DEVICE_REMOVE
+	bool "Support device removal"
+	help
+	  We can save some code space by dropping support for removing a
+	  device. This is not normally required in SPL, so by default this
+	  option is disabled for SPL.
+	depends on DM
+	default y if !SPL_BUILD
+	default n if SPL_BUILD
+
+config DM_STDIO
+	bool "Support stdio registration"
+	help
+	  Normally serial drivers register with stdio so that they can be used
+	  as normal output devices. In SPL we don't normally use stdio, so
+	  we can omit this feature.
+	depends on DM
+	default y if !SPL_BUILD
+	default n if SPL_BUILD

drivers/core/device.c

@@ -449,3 +449,15 @@ enum uclass_id device_get_uclass_id(struct udevice *dev)
 {
 	return dev->uclass->uc_drv->id;
 }
+
+#ifdef CONFIG_OF_CONTROL
+fdt_addr_t dev_get_addr(struct udevice *dev)
+{
+	return fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+}
+#else
+fdt_addr_t dev_get_addr(struct udevice *dev)
+{
+	return FDT_ADDR_T_NONE;
+}
+#endif

drivers/core/root.c

@@ -37,6 +37,65 @@ struct udevice *dm_root(void)
 	return gd->dm_root;
 }
 
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+void fix_drivers(void)
+{
+	struct driver *drv =
+		ll_entry_start(struct driver, driver);
+	const int n_ents = ll_entry_count(struct driver, driver);
+	struct driver *entry;
+
+	for (entry = drv; entry != drv + n_ents; entry++) {
+		if (entry->of_match)
+			entry->of_match = (const struct udevice_id *)
+				((u32)entry->of_match + gd->reloc_off);
+		if (entry->bind)
+			entry->bind += gd->reloc_off;
+		if (entry->probe)
+			entry->probe += gd->reloc_off;
+		if (entry->remove)
+			entry->remove += gd->reloc_off;
+		if (entry->unbind)
+			entry->unbind += gd->reloc_off;
+		if (entry->ofdata_to_platdata)
+			entry->ofdata_to_platdata += gd->reloc_off;
+		if (entry->child_pre_probe)
+			entry->child_pre_probe += gd->reloc_off;
+		if (entry->child_post_remove)
+			entry->child_post_remove += gd->reloc_off;
+		/* OPS are fixed in every uclass post_probe function */
+		if (entry->ops)
+			entry->ops += gd->reloc_off;
+	}
+}
+
+void fix_uclass(void)
+{
+	struct uclass_driver *uclass =
+		ll_entry_start(struct uclass_driver, uclass);
+	const int n_ents = ll_entry_count(struct uclass_driver, uclass);
+	struct uclass_driver *entry;
+
+	for (entry = uclass; entry != uclass + n_ents; entry++) {
+		if (entry->post_bind)
+			entry->post_bind += gd->reloc_off;
+		if (entry->pre_unbind)
+			entry->pre_unbind += gd->reloc_off;
+		if (entry->post_probe)
+			entry->post_probe += gd->reloc_off;
+		if (entry->pre_remove)
+			entry->pre_remove += gd->reloc_off;
+		if (entry->init)
+			entry->init += gd->reloc_off;
+		if (entry->destroy)
+			entry->destroy += gd->reloc_off;
+		/* FIXME maybe also need to fix these ops */
+		if (entry->ops)
+			entry->ops += gd->reloc_off;
+	}
+}
+#endif
+
 int dm_init(void)
 {
 	int ret;
@@ -47,6 +106,11 @@ int dm_init(void)
 	}
 	INIT_LIST_HEAD(&DM_UCLASS_ROOT_NON_CONST);
 
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+	fix_drivers();
+	fix_uclass();
+#endif
+
 	ret = device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST);
 	if (ret)
 		return ret;

drivers/demo/Kconfig

@@ -0,0 +1,26 @@
+config DM_DEMO
+	bool "Enable demo uclass support"
+	depends on DM
+	help
+	  This uclass allows you to play around with driver model. It provides
+	  an interface to a couple of demo devices. You can access it using
+	  the 'demo' command or by calling the uclass functions from your
+	  own code.
+
+config DM_DEMO_SIMPLE
+	bool "Enable simple demo device for driver model"
+	depends on DM_DEMO
+	help
+	  This device allows you to play around with driver model. It prints
+	  a message when the 'demo hello' command is executed which targets
+	  this device. It can be used to help understand how driver model
+	  works.
+
+config DM_DEMO_SHAPE
+	bool "Enable shape demo device for driver model"
+	depends on DM_DEMO
+	help
+	  This device allows you to play around with driver model. It prints
+	  a shape when the 'demo hello' command is executed which targets
+	  this device. It can be used to help understand how driver model
+	  works.

drivers/gpio/Kconfig

@@ -2,5 +2,8 @@ config DM_GPIO
 	bool "Enable Driver Model for GPIO drivers"
 	depends on DM
 	help
-	  If you want to use driver model for GPIO drivers, say Y.
+	  Enable driver model for GPIO access. The standard GPIO
-	  To use legacy GPIO drivers, say N.
+	  interface (gpio_get_value(), etc.) is then implemented by
+	  the GPIO uclass. Drivers provide methods to query the
+	  particular GPIOs that they provide. The uclass interface
+	  is defined in include/asm-generic/gpio.h.

drivers/gpio/at91_gpio.c

@@ -451,7 +451,7 @@ struct at91_port_priv {
 /* set GPIO pin 'gpio' as an input */
 static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
-	struct at91_port_priv *port = dev_get_platdata(dev);
+	struct at91_port_priv *port = dev_get_priv(dev);
 
 	at91_set_port_input(port->regs, offset, 0);
 
@@ -462,7 +462,7 @@ static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
 static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
 				       int value)
 {
-	struct at91_port_priv *port = dev_get_platdata(dev);
+	struct at91_port_priv *port = dev_get_priv(dev);
 
 	at91_set_port_output(port->regs, offset, value);
 
@@ -472,7 +472,7 @@ static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
 /* read GPIO IN value of pin 'gpio' */
 static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
 {
-	struct at91_port_priv *port = dev_get_platdata(dev);
+	struct at91_port_priv *port = dev_get_priv(dev);
 
 	return at91_get_port_value(port->regs, offset);
 }
@@ -481,7 +481,7 @@ static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
 static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
 			       int value)
 {
-	struct at91_port_priv *port = dev_get_platdata(dev);
+	struct at91_port_priv *port = dev_get_priv(dev);
 
 	at91_set_port_value(port->regs, offset, value);
 
@@ -490,7 +490,7 @@ static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
 
 static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
 {
-	struct at91_port_priv *port = dev_get_platdata(dev);
+	struct at91_port_priv *port = dev_get_priv(dev);
 
 	/* GPIOF_FUNC is not implemented yet */
 	if (at91_get_port_output(port->regs, offset))