zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards

This patch adds qspi driver support for all ZynqMP ZCU102
boards.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

arch/arm/dts/zynqmp-zcu102-revA.dts

@@ -534,7 +534,7 @@
 	status = "okay";
 	is-dual = <1>;
 	flash@0 {
-		compatible = "m25p80"; /* 32MB */
+		compatible = "m25p80", "spi-flash"; /* 32MB */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;

configs/xilinx_zynqmp_zcu102_rev1_0_defconfig

@@ -37,6 +37,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SDRAM=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
@@ -71,6 +72,7 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -92,6 +94,9 @@ CONFIG_DM_SCSI=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y

configs/xilinx_zynqmp_zcu102_revA_defconfig

@@ -36,6 +36,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SDRAM=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
@@ -68,6 +69,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -89,6 +91,9 @@ CONFIG_DM_SCSI=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y

configs/xilinx_zynqmp_zcu102_revB_defconfig

@@ -36,6 +36,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SDRAM=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
@@ -68,6 +69,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -89,6 +91,9 @@ CONFIG_DM_SCSI=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y