ARM: rmobile: Zap CONFIG_MMC_RENESAS_TUNING

Drop the CONFIG_MMC_RENESAS_TUNING symbol from Gen3 configs.
This symbol is no longer used after the Matsushita SDHI driver,
instead the renesas-sdhi driver uses CONFIG_MMC_HS200_SUPPORT
to discern whether the tuning support should be compiled in.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
--
V2: Submit this on top of configs which are actually in mainline

configs/r8a7795_salvator-x_defconfig

@@ -41,7 +41,6 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
-CONFIG_MMC_RENESAS_TUNING=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y

configs/r8a7795_ulcb_defconfig

@@ -41,7 +41,6 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
-CONFIG_MMC_RENESAS_TUNING=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y

configs/r8a7796_salvator-x_defconfig

@@ -42,7 +42,6 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
-CONFIG_MMC_RENESAS_TUNING=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y

configs/r8a7796_ulcb_defconfig

@@ -42,7 +42,6 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
-CONFIG_MMC_RENESAS_TUNING=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y

configs/r8a77970_eagle_defconfig

@@ -41,7 +41,6 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
-CONFIG_MMC_RENESAS_TUNING=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y

configs/r8a77995_draak_defconfig

@@ -42,7 +42,6 @@ CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_RENESAS_SDHI=y
-CONFIG_MMC_RENESAS_TUNING=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_CFI_FLASH=y