arm: ls1021x: Add support for initializing CAAM's stream id

There 4 JRs, 4 RTICs and 8 DECOs, and set them the same stream id
for using the same SMMU3 on LS1021A.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
master
Alison Wang 9 years ago committed by York Sun
parent 9f076be713
commit 8133574ea4
  1. 1
      arch/arm/include/asm/arch-ls102xa/config.h
  2. 57
      arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
  3. 15
      board/freescale/common/ls102xa_stream_id.c
  4. 21
      board/freescale/ls1021aqds/ls1021aqds.c
  5. 21
      board/freescale/ls1021atwr/ls1021atwr.c

@ -36,6 +36,7 @@
#define CONFIG_SYS_LS102XA_USB1_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET)
#define CONFIG_SYS_FSL_SEC_OFFSET 0x00700000
#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000
#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000

@ -7,11 +7,68 @@
#ifndef __FSL_LS102XA_STREAM_ID_H_
#define __FSL_LS102XA_STREAM_ID_H_
#include <fsl_sec.h>
#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \
{ .compat = name, \
.id = { idA }, .num_ids = 1, \
.reg_offset = off + CONFIG_SYS_IMMR, \
.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
}
#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \
{ .compat = name, \
.id = { idA, idB }, .num_ids = 2, \
.reg_offset = off + CONFIG_SYS_IMMR, \
.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
}
/*
* handle both old and new versioned SEC properties:
* "fsl,secX.Y" became "fsl,sec-vX.Y" during development
*/
#define SET_SEC_JR_LIODN_ENTRY(jrnum, liodnA, liodnB) \
SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB, \
offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum), \
SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\
offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum)
/* This is a bit evil since we treat rtic param as both a string & hex value */
#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \
SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \
liodnA, \
offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \
SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \
liodnA, \
offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa))
#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \
SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \
offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, 0)
struct liodn_id_table {
const char *compat;
u32 id[2];
u8 num_ids;
phys_addr_t compat_offset;
unsigned long reg_offset;
};
struct smmu_stream_id {
uint16_t offset;
uint16_t stream_id;
char dev_name[32];
};
void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size);
void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
#endif

@ -16,3 +16,18 @@ void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
for (i = 0; i < num; i++)
out_be32(scfg + id[i].offset, id[i].stream_id);
}
void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size)
{
int i;
u32 liodn;
for (i = 0; i < size; i++) {
if (tbl[i].num_ids == 2)
liodn = (tbl[i].id[0] << 16) | tbl[i].id[1];
else
liodn = tbl[i].id[0];
out_le32((uint32_t *)(tbl[i].reg_offset), liodn);
}
}

@ -509,6 +509,25 @@ static struct csu_ns_dev ns_dev[] = {
};
#endif
struct liodn_id_table sec_liodn_tbl[] = {
SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
};
struct smmu_stream_id dev_stream_id[] = {
{ 0x100, 0x01, "ETSEC MAC1" },
{ 0x104, 0x02, "ETSEC MAC2" },
@ -541,6 +560,8 @@ int board_init(void)
config_serdes_mux();
#endif
ls1021x_config_caam_stream_id(sec_liodn_tbl,
ARRAY_SIZE(sec_liodn_tbl));
ls102xa_config_smmu_stream_id(dev_stream_id,
ARRAY_SIZE(dev_stream_id));

@ -401,6 +401,25 @@ static struct csu_ns_dev ns_dev[] = {
};
#endif
struct liodn_id_table sec_liodn_tbl[] = {
SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
};
struct smmu_stream_id dev_stream_id[] = {
{ 0x100, 0x01, "ETSEC MAC1" },
{ 0x104, 0x02, "ETSEC MAC2" },
@ -427,6 +446,8 @@ int board_init(void)
#endif
#endif
ls1021x_config_caam_stream_id(sec_liodn_tbl,
ARRAY_SIZE(sec_liodn_tbl));
ls102xa_config_smmu_stream_id(dev_stream_id,
ARRAY_SIZE(dev_stream_id));

Loading…
Cancel
Save