Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/imx6qdl_icore_rqs.h include/configs/imx6ul_geam.h include/configs/imx6ul_isiot.hmaster
Tom Rini
7 years ago
commit
821560fd8e
@ -0,0 +1,15 @@ |
||||
if TARGET_PICO_IMX7D |
||||
|
||||
config SYS_BOARD |
||||
default "pico-imx7d" |
||||
|
||||
config SYS_VENDOR |
||||
default "technexion" |
||||
|
||||
config SYS_SOC |
||||
default "mx7" |
||||
|
||||
config SYS_CONFIG_NAME |
||||
default "pico-imx7d" |
||||
|
||||
endif |
||||
@ -0,0 +1,7 @@ |
||||
Technexion PICO-IMX7D board |
||||
M: Wig Cheng <wig.cheng@technexion.com> |
||||
M: Vanessa Maegima <vanessa.maegima@nxp.com> |
||||
S: Maintained |
||||
F: board/technexion/pico-imx7d/ |
||||
F: include/configs/pico-imx7d.h |
||||
F: configs/pico-imx7d_defconfig |
||||
@ -0,0 +1,6 @@ |
||||
# (C) Copyright 2017 NXP Semiconductors
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := pico-imx7d.o
|
||||
@ -0,0 +1,49 @@ |
||||
How to update U-Boot on pico-imx7d board |
||||
---------------------------------------- |
||||
|
||||
Required software on the host PC: |
||||
|
||||
- imx_usb_loader: https://github.com/boundarydevices/imx_usb_loader |
||||
|
||||
Build U-Boot for pico: |
||||
|
||||
$ make mrproper |
||||
$ make pico-imx7d_defconfig |
||||
$ make |
||||
|
||||
This generates the U-Boot binary called u-boot.imx. |
||||
|
||||
Put pico board in USB download mode (refer to the PICO-iMX7D Quick Start Guide |
||||
page 3) |
||||
|
||||
Connect a USB to serial adapter between the host PC and pico. |
||||
|
||||
Connect a USB cable between the OTG pico port and the host PC. |
||||
|
||||
Open a terminal program such as minicom. |
||||
|
||||
Copy u-boot.imx to the imx_usb_loader folder. |
||||
|
||||
Load u-boot.imx via USB: |
||||
|
||||
$ sudo ./imx_usb u-boot.imx |
||||
|
||||
Then U-Boot starts and its messages appear in the console program. |
||||
|
||||
Use the default environment variables: |
||||
|
||||
=> env default -f -a |
||||
=> saveenv |
||||
|
||||
Run the UMS command: |
||||
=> ums 0 mmc 0 |
||||
|
||||
Transfer u-boot.imx to be flashed into the eMMC: |
||||
|
||||
$ sudo dd if=u-boot.imx of=/dev/sdX bs=1K seek=1; sync |
||||
|
||||
Remove power from the pico board. |
||||
|
||||
Put pico board into normal boot mode. |
||||
|
||||
Power up the board and the new updated U-Boot should boot from eMMC. |
||||
@ -0,0 +1,98 @@ |
||||
/* |
||||
* Copyright (C) 2017 Freescale Semiconductor, Inc. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
* |
||||
* Refer docs/README.imxmage for more details about how-to configure |
||||
* and create imximage boot image |
||||
* |
||||
* The syntax is taken as close as possible with the kwbimage |
||||
*/ |
||||
|
||||
#define __ASSEMBLY__ |
||||
#include <config.h> |
||||
|
||||
/* image version */ |
||||
|
||||
IMAGE_VERSION 2 |
||||
|
||||
BOOT_FROM sd |
||||
|
||||
/* Secure boot support */ |
||||
#ifdef CONFIG_SECURE_BOOT |
||||
CSF CONFIG_CSF_SIZE |
||||
#endif |
||||
|
||||
/* |
||||
* Device Configuration Data (DCD) |
||||
* |
||||
* Each entry must have the format: |
||||
* Addr-type Address Value |
||||
* |
||||
* where: |
||||
* Addr-type register length (1,2 or 4 bytes) |
||||
* Address absolute address of the register |
||||
* value value to be stored in the register |
||||
*/ |
||||
|
||||
DATA 4 0x30340004 0x4F400005 |
||||
/* Clear then set bit30 to ensure exit from DDR retention */ |
||||
DATA 4 0x30360388 0x40000000 |
||||
DATA 4 0x30360384 0x40000000 |
||||
|
||||
DATA 4 0x30391000 0x00000002 |
||||
DATA 4 0x307a0000 0x01040001 |
||||
DATA 4 0x307a01a0 0x80400003 |
||||
DATA 4 0x307a01a4 0x00100020 |
||||
DATA 4 0x307a01a8 0x80100004 |
||||
DATA 4 0x307a0064 0x00400046 |
||||
DATA 4 0x307a0490 0x00000001 |
||||
DATA 4 0x307a00d0 0x00020083 |
||||
DATA 4 0x307a00d4 0x00690000 |
||||
DATA 4 0x307a00dc 0x09300004 |
||||
DATA 4 0x307a00e0 0x04080000 |
||||
DATA 4 0x307a00e4 0x00100004 |
||||
DATA 4 0x307a00f4 0x0000033f |
||||
DATA 4 0x307a0100 0x09081109 |
||||
DATA 4 0x307a0104 0x0007020d |
||||
DATA 4 0x307a0108 0x03040407 |
||||
DATA 4 0x307a010c 0x00002006 |
||||
DATA 4 0x307a0110 0x04020205 |
||||
DATA 4 0x307a0114 0x03030202 |
||||
DATA 4 0x307a0120 0x00000803 |
||||
DATA 4 0x307a0180 0x00800020 |
||||
DATA 4 0x307a0184 0x02000100 |
||||
DATA 4 0x307a0190 0x02098204 |
||||
DATA 4 0x307a0194 0x00030303 |
||||
DATA 4 0x307a0200 0x00000016 |
||||
DATA 4 0x307a0204 0x00080808 |
||||
DATA 4 0x307a0210 0x00000f0f |
||||
DATA 4 0x307a0214 0x07070707 |
||||
DATA 4 0x307a0218 0x0f070707 |
||||
DATA 4 0x307a0240 0x06000604 |
||||
DATA 4 0x307a0244 0x00000001 |
||||
DATA 4 0x30391000 0x00000000 |
||||
DATA 4 0x30790000 0x17420f40 |
||||
DATA 4 0x30790004 0x10210100 |
||||
DATA 4 0x30790010 0x00060807 |
||||
DATA 4 0x307900b0 0x1010007e |
||||
DATA 4 0x3079009c 0x00000b24 |
||||
DATA 4 0x30790020 0x08080808 |
||||
DATA 4 0x30790030 0x08080808 |
||||
DATA 4 0x30790050 0x01000010 |
||||
DATA 4 0x30790050 0x00000010 |
||||
|
||||
DATA 4 0x307900c0 0x0e407304 |
||||
DATA 4 0x307900c0 0x0e447304 |
||||
DATA 4 0x307900c0 0x0e447306 |
||||
|
||||
CHECK_BITS_SET 4 0x307900c4 0x1 |
||||
|
||||
DATA 4 0x307900c0 0x0e407304 |
||||
|
||||
DATA 4 0x30384130 0x00000000 |
||||
DATA 4 0x30340020 0x00000178 |
||||
DATA 4 0x30384130 0x00000002 |
||||
DATA 4 0x30790018 0x0000000f |
||||
|
||||
CHECK_BITS_SET 4 0x307a0004 0x1 |
||||
@ -0,0 +1,289 @@ |
||||
/*
|
||||
* Copyright (C) 2017 NXP Semiconductors |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <asm/arch/clock.h> |
||||
#include <asm/arch/crm_regs.h> |
||||
#include <asm/arch/imx-regs.h> |
||||
#include <asm/arch/mx7-pins.h> |
||||
#include <asm/arch/sys_proto.h> |
||||
#include <asm/gpio.h> |
||||
#include <asm/imx-common/iomux-v3.h> |
||||
#include <asm/imx-common/mxc_i2c.h> |
||||
#include <asm/io.h> |
||||
#include <common.h> |
||||
#include <fsl_esdhc.h> |
||||
#include <i2c.h> |
||||
#include <miiphy.h> |
||||
#include <mmc.h> |
||||
#include <netdev.h> |
||||
#include <usb.h> |
||||
#include <power/pmic.h> |
||||
#include <power/pfuze3000_pmic.h> |
||||
#include "../../freescale/common/pfuze.h" |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ |
||||
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) |
||||
|
||||
#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ |
||||
PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) |
||||
|
||||
#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) |
||||
#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) |
||||
|
||||
#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) |
||||
|
||||
#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ |
||||
PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) |
||||
|
||||
#ifdef CONFIG_SYS_I2C_MXC |
||||
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) |
||||
/* I2C4 for PMIC */ |
||||
static struct i2c_pads_info i2c_pad_info4 = { |
||||
.scl = { |
||||
.i2c_mode = MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL | PC, |
||||
.gpio_mode = MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 | PC, |
||||
.gp = IMX_GPIO_NR(6, 16), |
||||
}, |
||||
.sda = { |
||||
.i2c_mode = MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA | PC, |
||||
.gpio_mode = MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 | PC, |
||||
.gp = IMX_GPIO_NR(6, 17), |
||||
}, |
||||
}; |
||||
#endif |
||||
|
||||
int dram_init(void) |
||||
{ |
||||
gd->ram_size = PHYS_SDRAM_SIZE; |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
#ifdef CONFIG_POWER |
||||
#define I2C_PMIC 3 |
||||
int power_init_board(void) |
||||
{ |
||||
struct pmic *p; |
||||
int ret; |
||||
unsigned int reg, rev_id; |
||||
|
||||
ret = power_pfuze3000_init(I2C_PMIC); |
||||
if (ret) |
||||
return ret; |
||||
|
||||
p = pmic_get("PFUZE3000"); |
||||
ret = pmic_probe(p); |
||||
if (ret) |
||||
return ret; |
||||
|
||||
pmic_reg_read(p, PFUZE3000_DEVICEID, ®); |
||||
pmic_reg_read(p, PFUZE3000_REVID, &rev_id); |
||||
printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); |
||||
|
||||
/* disable Low Power Mode during standby mode */ |
||||
pmic_reg_read(p, PFUZE3000_LDOGCTL, ®); |
||||
reg |= 0x1; |
||||
pmic_reg_write(p, PFUZE3000_LDOGCTL, reg); |
||||
|
||||
/* SW1A/1B mode set to APS/APS */ |
||||
reg = 0x8; |
||||
pmic_reg_write(p, PFUZE3000_SW1AMODE, reg); |
||||
pmic_reg_write(p, PFUZE3000_SW1BMODE, reg); |
||||
|
||||
/* SW1A/1B standby voltage set to 1.025V */ |
||||
reg = 0xd; |
||||
pmic_reg_write(p, PFUZE3000_SW1ASTBY, reg); |
||||
pmic_reg_write(p, PFUZE3000_SW1BSTBY, reg); |
||||
|
||||
/* decrease SW1B normal voltage to 0.975V */ |
||||
pmic_reg_read(p, PFUZE3000_SW1BVOLT, ®); |
||||
reg &= ~0x1f; |
||||
reg |= PFUZE3000_SW1AB_SETP(975); |
||||
pmic_reg_write(p, PFUZE3000_SW1BVOLT, reg); |
||||
|
||||
return 0; |
||||
} |
||||
#endif |
||||
|
||||
static iomux_v3_cfg_t const wdog_pads[] = { |
||||
MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), |
||||
}; |
||||
|
||||
static iomux_v3_cfg_t const uart5_pads[] = { |
||||
MX7D_PAD_I2C4_SCL__UART5_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), |
||||
MX7D_PAD_I2C4_SDA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), |
||||
}; |
||||
|
||||
static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { |
||||
MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
||||
}; |
||||
|
||||
#ifdef CONFIG_FEC_MXC |
||||
static iomux_v3_cfg_t const fec1_pads[] = { |
||||
MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), |
||||
MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), |
||||
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
||||
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
||||
MX7D_PAD_SD3_STROBE__GPIO6_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), |
||||
MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), |
||||
}; |
||||
|
||||
#define FEC1_RST_GPIO IMX_GPIO_NR(6, 11) |
||||
|
||||
static void setup_iomux_fec(void) |
||||
{ |
||||
imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); |
||||
|
||||
gpio_direction_output(FEC1_RST_GPIO, 0); |
||||
udelay(500); |
||||
gpio_set_value(FEC1_RST_GPIO, 1); |
||||
} |
||||
|
||||
int board_eth_init(bd_t *bis) |
||||
{ |
||||
setup_iomux_fec(); |
||||
|
||||
return fecmxc_initialize_multi(bis, 0, |
||||
CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); |
||||
} |
||||
|
||||
static int setup_fec(void) |
||||
{ |
||||
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs |
||||
= (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; |
||||
|
||||
/* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17] */ |
||||
clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], |
||||
(IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK | |
||||
IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0); |
||||
|
||||
return set_clk_enet(ENET_125MHz); |
||||
} |
||||
|
||||
int board_phy_config(struct phy_device *phydev) |
||||
{ |
||||
unsigned short val; |
||||
|
||||
/* To enable AR8035 ouput a 125MHz clk from CLK_25M */ |
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); |
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); |
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); |
||||
|
||||
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); |
||||
val &= 0xffe7; |
||||
val |= 0x18; |
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); |
||||
|
||||
/* introduce tx clock delay */ |
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); |
||||
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); |
||||
val |= 0x0100; |
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); |
||||
|
||||
if (phydev->drv->config) |
||||
phydev->drv->config(phydev); |
||||
|
||||
return 0; |
||||
} |
||||
#endif |
||||
|
||||
static void setup_iomux_uart(void) |
||||
{ |
||||
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); |
||||
} |
||||
|
||||
static struct fsl_esdhc_cfg usdhc_cfg[1] = { |
||||
{USDHC3_BASE_ADDR}, |
||||
}; |
||||
|
||||
int board_mmc_getcd(struct mmc *mmc) |
||||
{ |
||||
/* Assume uSDHC3 emmc is always present */ |
||||
return 1; |
||||
} |
||||
|
||||
int board_mmc_init(bd_t *bis) |
||||
{ |
||||
imx_iomux_v3_setup_multiple_pads( |
||||
usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads)); |
||||
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
||||
|
||||
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); |
||||
} |
||||
|
||||
int board_early_init_f(void) |
||||
{ |
||||
setup_iomux_uart(); |
||||
|
||||
#ifdef CONFIG_SYS_I2C_MXC |
||||
setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); |
||||
#endif |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int board_init(void) |
||||
{ |
||||
/* address of boot parameters */ |
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; |
||||
|
||||
#ifdef CONFIG_FEC_MXC |
||||
setup_fec(); |
||||
#endif |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int board_late_init(void) |
||||
{ |
||||
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; |
||||
|
||||
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); |
||||
|
||||
set_wdog_reset(wdog); |
||||
|
||||
/*
|
||||
* Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), |
||||
* since we use PMIC_PWRON to reset the board. |
||||
*/ |
||||
clrsetbits_le16(&wdog->wcr, 0, 0x10); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int checkboard(void) |
||||
{ |
||||
puts("Board: i.MX7D PICOSOM\n"); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int board_usb_phy_mode(int port) |
||||
{ |
||||
return USB_INIT_DEVICE; |
||||
} |
||||
@ -0,0 +1,47 @@ |
||||
CONFIG_ARM=y |
||||
CONFIG_ARCH_MX6=y |
||||
CONFIG_SPL_GPIO_SUPPORT=y |
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y |
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y |
||||
CONFIG_TARGET_MX6Q_ICORE=y |
||||
CONFIG_SPL_SERIAL_SUPPORT=y |
||||
CONFIG_SPL_WATCHDOG_SUPPORT=y |
||||
# CONFIG_CMD_BMODE is not set |
||||
CONFIG_VIDEO=y |
||||
CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore" |
||||
CONFIG_OF_LIST="imx6q-icore imx6dl-icore" |
||||
CONFIG_FIT=y |
||||
CONFIG_FIT_SIGNATURE=y |
||||
CONFIG_FIT_VERBOSE=y |
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND" |
||||
CONFIG_BOOTDELAY=3 |
||||
CONFIG_SPL=y |
||||
CONFIG_SPL_DMA_SUPPORT=y |
||||
CONFIG_HUSH_PARSER=y |
||||
CONFIG_SYS_PROMPT="icorem6qdl> " |
||||
# CONFIG_CMD_IMLS is not set |
||||
CONFIG_CMD_MEMTEST=y |
||||
CONFIG_CMD_MMC=y |
||||
CONFIG_CMD_NAND=y |
||||
CONFIG_CMD_I2C=y |
||||
CONFIG_CMD_GPIO=y |
||||
CONFIG_CMD_MII=y |
||||
CONFIG_CMD_PING=y |
||||
CONFIG_CMD_CACHE=y |
||||
CONFIG_CMD_EXT4=y |
||||
CONFIG_CMD_EXT4_WRITE=y |
||||
CONFIG_CMD_FAT=y |
||||
CONFIG_CMD_FS_GENERIC=y |
||||
CONFIG_CMD_UBI=y |
||||
# CONFIG_BLK is not set |
||||
CONFIG_SYS_I2C_MXC=y |
||||
# CONFIG_DM_MMC_OPS is not set |
||||
CONFIG_NAND_MXS=y |
||||
CONFIG_FEC_MXC=y |
||||
CONFIG_PINCTRL=y |
||||
CONFIG_PINCTRL_IMX6=y |
||||
CONFIG_MXC_UART=y |
||||
CONFIG_IMX_THERMAL=y |
||||
CONFIG_VIDEO_IPUV3=y |
||||
CONFIG_PHYLIB=y |
||||
CONFIG_PHY_SMSC=y |
||||
@ -0,0 +1,35 @@ |
||||
CONFIG_ARM=y |
||||
CONFIG_ARCH_MX7=y |
||||
CONFIG_TARGET_PICO_IMX7D=y |
||||
CONFIG_IMX_RDC=y |
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/technexion/pico-imx7d/imximage.cfg" |
||||
CONFIG_HUSH_PARSER=y |
||||
CONFIG_CMD_BOOTZ=y |
||||
# CONFIG_CMD_BOOTD is not set |
||||
# CONFIG_CMD_IMI is not set |
||||
# CONFIG_CMD_IMLS is not set |
||||
# CONFIG_CMD_XIMG is not set |
||||
# CONFIG_CMD_SETEXPR is not set |
||||
CONFIG_CMD_MMC=y |
||||
CONFIG_CMD_PART=y |
||||
CONFIG_CMD_I2C=y |
||||
CONFIG_CMD_GPIO=y |
||||
CONFIG_CMD_DHCP=y |
||||
CONFIG_CMD_CACHE=y |
||||
CONFIG_CMD_EXT2=y |
||||
CONFIG_CMD_EXT4=y |
||||
CONFIG_CMD_EXT4_WRITE=y |
||||
CONFIG_CMD_FAT=y |
||||
CONFIG_CMD_USB=y |
||||
CONFIG_CMD_USB_MASS_STORAGE=y |
||||
CONFIG_USB=y |
||||
CONFIG_USB_EHCI_HCD=y |
||||
CONFIG_MXC_USB_OTG_HACTIVE=y |
||||
CONFIG_USB_STORAGE=y |
||||
CONFIG_USB_GADGET=y |
||||
CONFIG_CI_UDC=y |
||||
CONFIG_USB_GADGET_DOWNLOAD=y |
||||
CONFIG_G_DNL_MANUFACTURER="FSL" |
||||
CONFIG_G_DNL_VENDOR_NUM=0x0525 |
||||
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 |
||||
CONFIG_OF_LIBFDT=y |
||||
@ -1,146 +0,0 @@ |
||||
/*
|
||||
* Copyright (C) 2016 Amarula Solutions B.V. |
||||
* Copyright (C) 2016 Engicam S.r.l. |
||||
* |
||||
* Configuration settings for the Engicam i.CoreM6 QDL RQS Starter Kits. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __IMX6QLD_ICORE_RQS_CONFIG_H |
||||
#define __IMX6QLD_ICORE_RQS_CONFIG_H |
||||
|
||||
#include <linux/sizes.h> |
||||
#include "mx6_common.h" |
||||
|
||||
/* Size of malloc() pool */ |
||||
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) |
||||
|
||||
/* Total Size of Environment Sector */ |
||||
#define CONFIG_ENV_SIZE SZ_128K |
||||
|
||||
/* Allow to overwrite serial and ethaddr */ |
||||
#define CONFIG_ENV_OVERWRITE |
||||
|
||||
/* Environment */ |
||||
#ifndef CONFIG_ENV_IS_NOWHERE |
||||
/* Environment in MMC */ |
||||
# if defined(CONFIG_ENV_IS_IN_MMC) |
||||
# define CONFIG_ENV_OFFSET 0x100000 |
||||
# endif |
||||
#endif |
||||
|
||||
/* Default environment */ |
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"script=boot.scr\0" \
|
||||
"image=uImage\0" \
|
||||
"fit_image=fit.itb\0" \
|
||||
"console=ttymxc3\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"fdt_addr=0x18000000\0" \
|
||||
"boot_fdt=try\0" \
|
||||
"mmcpart=1\0" \
|
||||
"mmcautodetect=yes\0" \
|
||||
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=${mmcroot}\0" \
|
||||
"loadbootscript=" \
|
||||
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source\0" \
|
||||
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||
"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
|
||||
"fitboot=echo Booting FIT image from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"_mmcboot=run mmcargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"mmc dev ${mmcdev};" \
|
||||
"if mmc rescan; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loadfit; then " \
|
||||
"run fitboot; " \
|
||||
"else " \
|
||||
"if run loadimage; then " \
|
||||
"run _mmcboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi\0" |
||||
|
||||
#define CONFIG_BOOTCOMMAND "run $modeboot" |
||||
|
||||
/* Miscellaneous configurable options */ |
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000 |
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) |
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
||||
#define CONFIG_SYS_HZ 1000 |
||||
|
||||
/* Physical Memory Map */ |
||||
#define CONFIG_NR_DRAM_BANKS 1 |
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
||||
GENERATED_GBL_DATA_SIZE) |
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
||||
CONFIG_SYS_INIT_SP_OFFSET) |
||||
|
||||
/* FIT */ |
||||
#ifdef CONFIG_FIT |
||||
# define CONFIG_IMAGE_FORMAT_LEGACY |
||||
#endif |
||||
|
||||
/* UART */ |
||||
#ifdef CONFIG_MXC_UART |
||||
# define CONFIG_MXC_UART_BASE UART4_BASE |
||||
#endif |
||||
|
||||
/* MMC */ |
||||
#ifdef CONFIG_FSL_USDHC |
||||
# define CONFIG_SYS_MMC_ENV_DEV 0 |
||||
# define CONFIG_SYS_FSL_USDHC_NUM 2 |
||||
# define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
||||
#endif |
||||
|
||||
/* Ethernet */ |
||||
#ifdef CONFIG_FEC_MXC |
||||
# define CONFIG_FEC_MXC_PHYADDR 3 |
||||
# define CONFIG_FEC_XCV_TYPE RGMII |
||||
|
||||
# define CONFIG_MII |
||||
# define CONFIG_PHYLIB |
||||
# define CONFIG_PHY_MICREL |
||||
# define CONFIG_PHY_MICREL_KSZ9021 |
||||
#endif |
||||
|
||||
/* SPL */ |
||||
#ifdef CONFIG_SPL |
||||
# define CONFIG_SPL_MMC_SUPPORT |
||||
# include "imx6_spl.h" |
||||
# ifdef CONFIG_SPL_BUILD |
||||
# undef CONFIG_DM_GPIO |
||||
# undef CONFIG_DM_MMC |
||||
# endif |
||||
#endif |
||||
|
||||
#endif /* __IMX6QLD_ICORE_RQS_CONFIG_H */ |
||||
@ -1,194 +0,0 @@ |
||||
/*
|
||||
* Copyright (C) 2016 Amarula Solutions B.V. |
||||
* Copyright (C) 2016 Engicam S.r.l. |
||||
* |
||||
* Configuration settings for the Engicam GEAM6UL Starter Kits. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __IMX6UL_GEAM_CONFIG_H |
||||
#define __IMX6UL_GEAM_CONFIG_H |
||||
|
||||
#include <linux/sizes.h> |
||||
#include "mx6_common.h" |
||||
|
||||
/* Size of malloc() pool */ |
||||
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) |
||||
|
||||
/* Total Size of Environment Sector */ |
||||
#define CONFIG_ENV_SIZE SZ_128K |
||||
|
||||
/* Allow to overwrite serial and ethaddr */ |
||||
#define CONFIG_ENV_OVERWRITE |
||||
|
||||
/* Environment */ |
||||
#ifndef CONFIG_ENV_IS_NOWHERE |
||||
/* Environment in MMC */ |
||||
# if defined(CONFIG_ENV_IS_IN_MMC) |
||||
# define CONFIG_ENV_OFFSET 0x100000 |
||||
/* Environment in NAND */ |
||||
# elif defined(CONFIG_ENV_IS_IN_NAND) |
||||
# define CONFIG_ENV_OFFSET 0x400000 |
||||
# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE |
||||
# endif |
||||
#endif |
||||
|
||||
/* Default environment */ |
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"script=boot.scr\0" \
|
||||
"image=uImage\0" \
|
||||
"fit_image=fit.itb\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"fdt_addr=0x87800000\0" \
|
||||
"boot_fdt=try\0" \
|
||||
"mmcpart=1\0" \
|
||||
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
|
||||
"mmcautodetect=yes\0" \
|
||||
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=${mmcroot}\0" \
|
||||
"ubiargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
|
||||
"loadbootscript=" \
|
||||
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source\0" \
|
||||
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||
"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
|
||||
"fitboot=echo Booting FIT image from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"_mmcboot=run mmcargs; " \
|
||||
"run mmcargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"if mmc rescan; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loadfit; then " \
|
||||
"run fitboot; " \
|
||||
"else " \
|
||||
"if run loadimage; then " \
|
||||
"run _mmcboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"if mtdparts; then " \
|
||||
"echo Starting nand boot ...; " \
|
||||
"else " \
|
||||
"mtdparts default; " \
|
||||
"fi; " \
|
||||
"run ubiargs; " \
|
||||
"nand read ${loadaddr} kernel 0x800000; " \
|
||||
"nand read ${fdt_addr} dtb 0x100000; " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}\0" |
||||
|
||||
#define CONFIG_BOOTCOMMAND "run $modeboot" |
||||
|
||||
/* Miscellaneous configurable options */ |
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000 |
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) |
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
||||
#define CONFIG_SYS_HZ 1000 |
||||
|
||||
/* Physical Memory Map */ |
||||
#define CONFIG_NR_DRAM_BANKS 1 |
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
||||
GENERATED_GBL_DATA_SIZE) |
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
||||
CONFIG_SYS_INIT_SP_OFFSET) |
||||
|
||||
/* FIT */ |
||||
#ifdef CONFIG_FIT |
||||
# define CONFIG_IMAGE_FORMAT_LEGACY |
||||
#endif |
||||
|
||||
/* UART */ |
||||
#ifdef CONFIG_MXC_UART |
||||
# define CONFIG_MXC_UART_BASE UART1_BASE |
||||
#endif |
||||
|
||||
/* MMC */ |
||||
#ifdef CONFIG_FSL_USDHC |
||||
# define CONFIG_SYS_MMC_ENV_DEV 0 |
||||
# define CONFIG_SYS_FSL_USDHC_NUM 1 |
||||
# define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
||||
#endif |
||||
|
||||
/* NAND */ |
||||
#ifdef CONFIG_NAND_MXS |
||||
# define CONFIG_SYS_MAX_NAND_DEVICE 1 |
||||
# define CONFIG_SYS_NAND_BASE 0x40000000 |
||||
# define CONFIG_SYS_NAND_5_ADDR_CYCLE |
||||
# define CONFIG_SYS_NAND_ONFI_DETECTION |
||||
# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE |
||||
# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 |
||||
|
||||
/* MTD device */ |
||||
# define CONFIG_MTD_DEVICE |
||||
# define CONFIG_CMD_MTDPARTS |
||||
# define CONFIG_MTD_PARTITIONS |
||||
# define MTDIDS_DEFAULT "nand0=gpmi-nand" |
||||
# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \ |
||||
"1m(env),8m(kernel),1m(dtb),-(rootfs)" |
||||
|
||||
/* UBI */ |
||||
# define CONFIG_CMD_UBIFS |
||||
# define CONFIG_RBTREE |
||||
# define CONFIG_LZO |
||||
|
||||
# define CONFIG_APBH_DMA |
||||
# define CONFIG_APBH_DMA_BURST |
||||
# define CONFIG_APBH_DMA_BURST8 |
||||
#endif |
||||
|
||||
/* Ethernet */ |
||||
#ifdef CONFIG_FEC_MXC |
||||
# define CONFIG_FEC_MXC_PHYADDR 0 |
||||
# define CONFIG_FEC_XCV_TYPE RMII |
||||
|
||||
# define CONFIG_MII |
||||
# define CONFIG_PHYLIB |
||||
# define CONFIG_PHY_SMSC |
||||
#endif |
||||
|
||||
/* SPL */ |
||||
#ifdef CONFIG_SPL |
||||
# ifdef CONFIG_NAND_MXS |
||||
# define CONFIG_SPL_NAND_SUPPORT |
||||
# else |
||||
# define CONFIG_SPL_MMC_SUPPORT |
||||
# endif |
||||
|
||||
# include "imx6_spl.h" |
||||
# ifdef CONFIG_SPL_BUILD |
||||
# undef CONFIG_DM_GPIO |
||||
# undef CONFIG_DM_MMC |
||||
# endif |
||||
#endif |
||||
|
||||
#endif /* __IMX6UL_GEAM_CONFIG_H */ |
||||
@ -1,195 +0,0 @@ |
||||
/*
|
||||
* Copyright (C) 2016 Amarula Solutions B.V. |
||||
* Copyright (C) 2016 Engicam S.r.l. |
||||
* |
||||
* Configuration settings for the Engicam Is.IoT MX6UL Starter Kits. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __IMX6UL_ISIOT_CONFIG_H |
||||
#define __IMX6UL_ISIOT_CONFIG_H |
||||
|
||||
#include <linux/sizes.h> |
||||
#include "mx6_common.h" |
||||
|
||||
/* Size of malloc() pool */ |
||||
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) |
||||
|
||||
/* Total Size of Environment Sector */ |
||||
#define CONFIG_ENV_SIZE SZ_128K |
||||
|
||||
/* Allow to overwrite serial and ethaddr */ |
||||
#define CONFIG_ENV_OVERWRITE |
||||
|
||||
/* Environment */ |
||||
#ifndef CONFIG_ENV_IS_NOWHERE |
||||
/* Environment in MMC */ |
||||
# if defined(CONFIG_ENV_IS_IN_MMC) |
||||
# define CONFIG_ENV_OFFSET 0x100000 |
||||
/* Environment in NAND */ |
||||
# elif defined(CONFIG_ENV_IS_IN_NAND) |
||||
# define CONFIG_ENV_OFFSET 0x400000 |
||||
# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE |
||||
# endif |
||||
#endif |
||||
|
||||
/* Default environment */ |
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"script=boot.scr\0" \
|
||||
"image=uImage\0" \
|
||||
"fit_image=fit.itb\0" \
|
||||
"splashpos=m,m\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"fdt_addr=0x87800000\0" \
|
||||
"boot_fdt=try\0" \
|
||||
"mmcpart=1\0" \
|
||||
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
|
||||
"mmcautodetect=yes\0" \
|
||||
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=${mmcroot}\0" \
|
||||
"ubiargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
|
||||
"loadbootscript=" \
|
||||
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source\0" \
|
||||
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||
"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
|
||||
"fitboot=echo Booting FIT image from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"_mmcboot=run mmcargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"if mmc rescan; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loadfit; then " \
|
||||
"run fitboot; " \
|
||||
"else " \
|
||||
"if run loadimage; then " \
|
||||
"run _mmcboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"if mtdparts; then " \
|
||||
"echo Starting nand boot ...; " \
|
||||
"else " \
|
||||
"mtdparts default; " \
|
||||
"fi; " \
|
||||
"run ubiargs; " \
|
||||
"nand read ${loadaddr} kernel 0x800000; " \
|
||||
"nand read ${fdt_addr} dtb 0x100000; " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}\0" |
||||
|
||||
#define CONFIG_BOOTCOMMAND "run $modeboot" |
||||
|
||||
/* Miscellaneous configurable options */ |
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000 |
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) |
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
||||
#define CONFIG_SYS_HZ 1000 |
||||
|
||||
/* Physical Memory Map */ |
||||
#define CONFIG_NR_DRAM_BANKS 1 |
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
||||
GENERATED_GBL_DATA_SIZE) |
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
||||
CONFIG_SYS_INIT_SP_OFFSET) |
||||
|
||||
/* FIT */ |
||||
#ifdef CONFIG_FIT |
||||
# define CONFIG_IMAGE_FORMAT_LEGACY |
||||
#endif |
||||
|
||||
/* UART */ |
||||
#ifdef CONFIG_MXC_UART |
||||
# define CONFIG_MXC_UART_BASE UART1_BASE |
||||
#endif |
||||
|
||||
/* MMC */ |
||||
#ifdef CONFIG_FSL_USDHC |
||||
# define CONFIG_SYS_MMC_ENV_DEV 0 |
||||
# define CONFIG_SYS_FSL_USDHC_NUM 2 |
||||
# define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
||||
#endif |
||||
|
||||
/* NAND */ |
||||
#ifdef CONFIG_NAND_MXS |
||||
# define CONFIG_SYS_MAX_NAND_DEVICE 1 |
||||
# define CONFIG_SYS_NAND_BASE 0x40000000 |
||||
# define CONFIG_SYS_NAND_5_ADDR_CYCLE |
||||
# define CONFIG_SYS_NAND_ONFI_DETECTION |
||||
# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE |
||||
# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 |
||||
|
||||
/* MTD device */ |
||||
# define CONFIG_MTD_DEVICE |
||||
# define CONFIG_CMD_MTDPARTS |
||||
# define CONFIG_MTD_PARTITIONS |
||||
# define MTDIDS_DEFAULT "nand0=gpmi-nand" |
||||
# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \ |
||||
"1m(env),8m(kernel),1m(dtb),-(rootfs)" |
||||
|
||||
/* UBI */ |
||||
# define CONFIG_CMD_UBIFS |
||||
# define CONFIG_RBTREE |
||||
# define CONFIG_LZO |
||||
|
||||
/* APBH DMA */ |
||||
# define CONFIG_APBH_DMA |
||||
# define CONFIG_APBH_DMA_BURST |
||||
# define CONFIG_APBH_DMA_BURST8 |
||||
#endif |
||||
|
||||
/* Ethernet */ |
||||
#ifdef CONFIG_FEC_MXC |
||||
# define CONFIG_FEC_MXC_PHYADDR 0 |
||||
# define CONFIG_FEC_XCV_TYPE RMII |
||||
|
||||
# define CONFIG_MII |
||||
# define CONFIG_PHYLIB |
||||
# define CONFIG_PHY_SMSC |
||||
#endif |
||||
|
||||
/* SPL */ |
||||
#ifdef CONFIG_SPL |
||||
# ifdef CONFIG_NAND_MXS |
||||
# define CONFIG_SPL_NAND_SUPPORT |
||||
# else |
||||
# define CONFIG_SPL_MMC_SUPPORT |
||||
# endif |
||||
|
||||
# include "imx6_spl.h" |
||||
# ifdef CONFIG_SPL_BUILD |
||||
# undef CONFIG_DM_GPIO |
||||
# undef CONFIG_DM_MMC |
||||
# endif |
||||
#endif |
||||
|
||||
#endif /* __IMX6UL_ISIOT_CONFIG_H */ |
||||
@ -0,0 +1,143 @@ |
||||
/*
|
||||
* Copyright (C) 2017 NXP Semiconductors |
||||
* |
||||
* Configuration settings for the i.MX7D Pico board. |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#ifndef __PICO_IMX7D_CONFIG_H |
||||
#define __PICO_IMX7D_CONFIG_H |
||||
|
||||
#include "mx7_common.h" |
||||
|
||||
#define PHYS_SDRAM_SIZE SZ_1G |
||||
|
||||
/* Size of malloc() pool */ |
||||
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) |
||||
|
||||
#define CONFIG_MXC_UART_BASE UART5_IPS_BASE_ADDR |
||||
|
||||
/* Network */ |
||||
#define CONFIG_FEC_MXC |
||||
#define CONFIG_MII |
||||
#define CONFIG_FEC_XCV_TYPE RGMII |
||||
#define CONFIG_ETHPRIME "FEC" |
||||
#define CONFIG_FEC_MXC_PHYADDR 1 |
||||
|
||||
#define CONFIG_PHYLIB |
||||
#define CONFIG_PHY_ATHEROS |
||||
|
||||
/* ENET1 */ |
||||
#define IMX_FEC_BASE ENET_IPS_BASE_ADDR |
||||
|
||||
/* MMC Config */ |
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
||||
|
||||
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ |
||||
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 |
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"script=boot.scr\0" \
|
||||
"image=zImage\0" \
|
||||
"console=ttymxc4\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"fdt_file=imx7d-pico.dtb\0" \
|
||||
"fdt_addr=0x83000000\0" \
|
||||
"ip_dyn=yes\0" \
|
||||
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
||||
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
||||
"finduuid=part uuid mmc 0:2 uuid\0" \
|
||||
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=PARTUUID=${uuid} rootwait rw\0" \
|
||||
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run finduuid; " \
|
||||
"run mmcargs; " \
|
||||
"if run loadfdt; then " \
|
||||
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi;\0" \
|
||||
"netargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=/dev/nfs " \
|
||||
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
||||
"netboot=echo Booting from net ...; " \
|
||||
"run netargs; " \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"${get_cmd} ${image}; " \
|
||||
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
||||
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi;\0" |
||||
|
||||
#define CONFIG_BOOTCOMMAND \ |
||||
"if mmc rescan; then " \
|
||||
"if run loadimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run netboot; " \
|
||||
"fi; " \
|
||||
"else run netboot; fi" |
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000 |
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) |
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
||||
#define CONFIG_SYS_HZ 1000 |
||||
|
||||
/* Physical Memory Map */ |
||||
#define CONFIG_NR_DRAM_BANKS 1 |
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \ |
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
||||
#define CONFIG_SYS_INIT_SP_ADDR \ |
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
||||
|
||||
/* I2C configs */ |
||||
#define CONFIG_SYS_I2C |
||||
#define CONFIG_SYS_I2C_MXC |
||||
#define CONFIG_SYS_I2C_MXC_I2C1 |
||||
#define CONFIG_SYS_I2C_MXC_I2C2 |
||||
#define CONFIG_SYS_I2C_MXC_I2C3 |
||||
#define CONFIG_SYS_I2C_MXC_I2C4 |
||||
#define CONFIG_SYS_I2C_SPEED 100000 |
||||
|
||||
/* PMIC */ |
||||
#define CONFIG_POWER |
||||
#define CONFIG_POWER_I2C |
||||
#define CONFIG_POWER_PFUZE3000 |
||||
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 |
||||
|
||||
/* FLASH and environment organization */ |
||||
#define CONFIG_ENV_SIZE SZ_8K |
||||
#define CONFIG_ENV_IS_IN_MMC |
||||
|
||||
#define CONFIG_ENV_OFFSET (8 * SZ_64K) |
||||
#define CONFIG_SYS_FSL_USDHC_NUM 2 |
||||
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0 |
||||
#define CONFIG_SYS_MMC_ENV_PART 0 |
||||
|
||||
/* USB Configs */ |
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
||||
#define CONFIG_MXC_USB_FLAGS 0 |
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
||||
|
||||
#define CONFIG_IMX_THERMAL |
||||
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE |
||||
|
||||
#endif |
||||
Loading…
Reference in new issue