W1-EEPROM: add sandbox driver

Add a sandbox driver for a one wire EEPROM memory

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
lime2-spi
Eugen Hristev 6 年前 提交者 Tom Rini
父節點 0fb667ae19
當前提交 84e55bdd8b
  1. 6
      drivers/w1-eeprom/Kconfig
  2. 1
      drivers/w1-eeprom/Makefile
  3. 61
      drivers/w1-eeprom/eep_sandbox.c
  4. 1
      include/w1.h

@ -18,6 +18,12 @@ config W1_EEPROM_DS24XXX
help
Maxim DS24 EEPROMs 1-Wire EEPROM support
config W1_EEPROM_SANDBOX
bool "Enable sandbox onewire EEPROM driver"
depends on W1
help
Sandbox driver for a onewire EEPROM memory
endif
endmenu

@ -2,3 +2,4 @@ obj-$(CONFIG_W1_EEPROM) += w1-eeprom-uclass.o
obj-$(CONFIG_W1_EEPROM_DS24XXX) += ds24xxx.o
obj-$(CONFIG_W1_EEPROM_SANDBOX) += eep_sandbox.o

@ -0,0 +1,61 @@
/* SPDX-License-Identifier: GPL-2.0+
*
* Copyright (c) 2018 Microchip Technology, Inc.
*
*/
#include <common.h>
#include <linux/err.h>
#include <dm.h>
#include <w1-eeprom.h>
#include <w1.h>
#define W1_F2D_READ_EEPROM 0xf0
#define EEP_SANDBOX_SAMPLE_MEM "this is a sample EEPROM memory string."
static int eep_sandbox_read_buf(struct udevice *dev, unsigned int offset,
u8 *buf, unsigned int count)
{
/* do not allow to copy more than our maximum sample string */
if (offset + count < strlen(EEP_SANDBOX_SAMPLE_MEM)) {
offset = 0;
count = strlen(EEP_SANDBOX_SAMPLE_MEM);
}
strncpy((char *)buf, EEP_SANDBOX_SAMPLE_MEM, count);
/*
* in case the w1 subsystem uses some different kind of sandbox testing,
* like randomized gpio values , we take the buffer from there
*/
w1_reset_select(dev);
w1_write_byte(dev, W1_F2D_READ_EEPROM);
w1_write_byte(dev, offset & 0xff);
w1_write_byte(dev, offset >> 8);
w1_read_buf(dev, buf, count);
/*
* even if read buf from w1 fails, return success as we hardcoded
* the buffer.
*/
return 0;
}
static const struct w1_eeprom_ops eep_sandbox_ops = {
.read_buf = eep_sandbox_read_buf,
};
static const struct udevice_id eep_sandbox_id[] = {
{ .compatible = "sandbox,w1-eeprom", .data = W1_FAMILY_EEP_SANDBOX },
{ },
};
U_BOOT_DRIVER(eep_sandbox) = {
.name = "eep_sandbox",
.id = UCLASS_W1_EEPROM,
.of_match = eep_sandbox_id,
.ops = &eep_sandbox_ops,
};

@ -12,6 +12,7 @@
#define W1_FAMILY_DS24B33 0x23
#define W1_FAMILY_DS2431 0x2d
#define W1_FAMILY_EEP_SANDBOX 0xfe
struct w1_device {
u64 id;

載入中…
取消
儲存