crypto/fsl: Make CAAM transactions cacheable

This commit solves CAAM coherency issue on ls2080. When caches are
enabled and CAAM's DMA's AXI transcations are not made cacheable,
Core reads/writes data from/to caches and CAAM does from main memory.
This forces data flushes to synchronize various data structures. But
even if any data in proximity of these structures is read by core,
these structures again are fetched in caches.

To avoid this problem, either all the data that CAAM accesses can be
made cache line aligned or CAAM transcations can be made cacheable.

So, this commit makes CAAM transcations as write back with write and
read allocate.

Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
master
Saksham Jain 8 years ago committed by York Sun
parent 69b6a796f7
commit 8a6f83dcb8
  1. 13
      drivers/crypto/fsl/jr.c
  2. 3
      drivers/crypto/fsl/jr.h

@ -543,7 +543,20 @@ int sec_init(void)
uint32_t liodn_s;
#endif
/*
* Modifying CAAM Read/Write Attributes
* For LS2080A and LS2085A
* For AXI Write - Cacheable, Write Back, Write allocate
* For AXI Read - Cacheable, Read allocate
* Only For LS2080a and LS2085a, to solve CAAM coherency issues
*/
#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT);
mcr = (mcr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT);
#else
mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0x2 << MCFGR_AWCACHE_SHIFT);
#endif
#ifdef CONFIG_PHYS_64BIT
mcr |= (1 << MCFGR_PS_SHIFT);
#endif

@ -23,6 +23,9 @@
#define MCFGR_PS_SHIFT 16
#define MCFGR_AWCACHE_SHIFT 8
#define MCFGR_AWCACHE_MASK (0xf << MCFGR_AWCACHE_SHIFT)
#define MCFGR_ARCACHE_SHIFT 12
#define MCFGR_ARCACHE_MASK (0xf << MCFGR_ARCACHE_SHIFT)
#define JR_INTMASK 0x00000001
#define JRCR_RESET 0x01
#define JRINT_ERR_HALT_INPROGRESS 0x4

Loading…
Cancel
Save