ARM: sunxi: Add basic A23 support

The basic blocks of the A23 are similar to the A31 (sun6i). Re-use
sun6i code for initial clock, gpio, and uart setup.

There is no SPL support for A23, as we do not have any documentation
or sample code for DRAM initialization.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

arch/arm/Kconfig

@@ -456,6 +456,9 @@ config TARGET_SUN6I
 config TARGET_SUN7I
 	bool "Support sun7i"
 
+config TARGET_SUN8I
+	bool "Support sun8i"
+
 config TARGET_SNOWBALL
 	bool "Support snowball"
 

arch/arm/cpu/armv7/sunxi/Makefile

@@ -12,10 +12,12 @@ obj-y	+= board.o
 obj-y	+= clock.o
 obj-y	+= pinmux.o
 obj-$(CONFIG_SUN6I)	+= prcm.o
+obj-$(CONFIG_SUN8I)	+= prcm.o
 obj-$(CONFIG_SUN4I)	+= clock_sun4i.o
 obj-$(CONFIG_SUN5I)	+= clock_sun4i.o
 obj-$(CONFIG_SUN6I)	+= clock_sun6i.o
 obj-$(CONFIG_SUN7I)	+= clock_sun4i.o
+obj-$(CONFIG_SUN8I)	+= clock_sun6i.o
 
 ifndef CONFIG_SPL_BUILD
 obj-y	+= cpu_info.o

arch/arm/cpu/armv7/sunxi/board.c

@@ -110,7 +110,8 @@ void reset_cpu(ulong addr)
 /* do some early init */
 void s_init(void)
 {
-#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \
+		defined CONFIG_SUN6I || defined CONFIG_SUN8I)
 	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
 	asm volatile(
 		"mrc p15, 0, r0, c1, c0, 1\n"

arch/arm/cpu/armv7/sunxi/cpu_info.c

@@ -27,6 +27,8 @@ int print_cpuinfo(void)
 	puts("CPU:   Allwinner A31 (SUN6I)\n");
 #elif defined CONFIG_SUN7I
 	puts("CPU:   Allwinner A20 (SUN7I)\n");
+#elif defined CONFIG_SUN8I
+	puts("CPU:   Allwinner A23 (SUN8I)\n");
 #else
 #warning Please update cpu_info.c with correct CPU information
 	puts("CPU:   SUNXI Family\n");

arch/arm/include/asm/arch-sunxi/clock.h

@@ -15,7 +15,7 @@
 #define CLK_GATE_CLOSE			0x0
 
 /* clock control module regs definition */
-#ifdef CONFIG_SUN6I
+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
 #include <asm/arch/clock_sun6i.h>
 #else
 #include <asm/arch/clock_sun4i.h>

board/sunxi/Kconfig

@@ -1,4 +1,4 @@
-if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I
+if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I || TARGET_SUN8I
 
 config SYS_CONFIG_NAME
 	string
@@ -6,6 +6,7 @@ config SYS_CONFIG_NAME
 	default "sun5i" if TARGET_SUN5I
 	default "sun6i" if TARGET_SUN6I
 	default "sun7i" if TARGET_SUN7I
+	default "sun8i" if TARGET_SUN8I
 
 config SYS_CPU
 	default "armv7"

include/configs/sun8i.h

@@ -0,0 +1,23 @@
+/*
+ * (C) Copyright 2014 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Configuration settings for the Allwinner A23 (sun8i) CPU
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * A23 specific configuration
+ */
+#define CONFIG_SUN8I		/* sun8i SoC generation */
+#define CONFIG_SYS_PROMPT	"sun8i# "
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */