Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arc: move low-level interrupt and exception handlers in a separate file

Browse Source 
This separation makes maintenance of code easier because those low-level
interrupt- or exception handling routines are pretty static and usually
require not much care while start-up code is a subject of modifications
and enhancements.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
master
Alexey Brodkin 9 years ago
parent 4d93617d87
commit 8ee28251d9
3 changed files with 152 additions and 144 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      arch/arc/lib/Makefile
  2. 151
      arch/arc/lib/ints_low.S
  3. 144
      arch/arc/lib/start.S

1
arch/arc/lib/Makefile
Unescape View File

@ -19,6 +19,7 @@ obj-y += memset.o
obj-y += reset.o
obj-y += timer.o
obj-y += start.o
obj-y += ints_low.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o

151
arch/arc/lib/ints_low.S
Unescape View File

@ -0,0 +1,151 @@
/*
* Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/linkage.h>
/*
* Note on the LD/ST addressing modes with address register write-back
*
* LD.a same as LD.aw
*
* LD.a reg1, [reg2, x] => Pre Incr
* Eff Addr for load = [reg2 + x]
*
* LD.ab reg1, [reg2, x] => Post Incr
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [%sp, -4]
.endm
.macro PUSHAX aux
lr %r9, [\aux]
PUSH %r9
.endm
.macro SAVE_R1_TO_R24
PUSH %r1
PUSH %r2
PUSH %r3
PUSH %r4
PUSH %r5
PUSH %r6
PUSH %r7
PUSH %r8
PUSH %r9
PUSH %r10
PUSH %r11
PUSH %r12
PUSH %r13
PUSH %r14
PUSH %r15
PUSH %r16
PUSH %r17
PUSH %r18
PUSH %r19
PUSH %r20
PUSH %r21
PUSH %r22
PUSH %r23
PUSH %r24
.endm
.macro SAVE_ALL_SYS
/* saving %r0 to reg->r0 in advance since we read %ecr into it */
st %r0, [%sp, -8]
lr %r0, [%ecr] /* all stack addressing is manual so far */
st %r0, [%sp]
st %sp, [%sp, -4]
/* now move %sp to reg->r0 position so we can do "push" automatically */
sub %sp, %sp, 8
SAVE_R1_TO_R24
PUSH %r25
PUSH %gp
PUSH %fp
PUSH %blink
PUSHAX %eret
PUSHAX %erstatus
PUSH %lp_count
PUSHAX %lp_end
PUSHAX %lp_start
PUSHAX %erbta
.endm
.macro SAVE_EXCEPTION_SOURCE
#ifdef CONFIG_MMU
/* If MMU exists exception faulting address is loaded in EFA reg */
lr %r0, [%efa]
#else
/* Otherwise in ERET (exception return) reg */
lr %r0, [%eret]
#endif
.endm
ENTRY(memory_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_memory_error
ENDPROC(memory_error)
ENTRY(instruction_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_instruction_error
ENDPROC(instruction_error)
ENTRY(interrupt_handler)
/* Todo - save and restore CPU context when interrupts will be in use */
bl do_interrupt_handler
rtie
ENDPROC(interrupt_handler)
ENTRY(EV_MachineCheck)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_machine_check_fault
ENDPROC(EV_MachineCheck)
ENTRY(EV_TLBMissI)
SAVE_ALL_SYS
mov %r0, %sp
j do_itlb_miss
ENDPROC(EV_TLBMissI)
ENTRY(EV_TLBMissD)
SAVE_ALL_SYS
mov %r0, %sp
j do_dtlb_miss
ENDPROC(EV_TLBMissD)
ENTRY(EV_TLBProtV)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_tlb_prot_violation
ENDPROC(EV_TLBProtV)
ENTRY(EV_PrivilegeV)
SAVE_ALL_SYS
mov %r0, %sp
j do_privilege_violation
ENDPROC(EV_PrivilegeV)
ENTRY(EV_Trap)
SAVE_ALL_SYS
mov %r0, %sp
j do_trap
ENDPROC(EV_Trap)
ENTRY(EV_Extension)
SAVE_ALL_SYS
mov %r0, %sp
j do_extension
ENDPROC(EV_Extension)

144
arch/arc/lib/start.S
Unescape View File

@ -9,86 +9,6 @@
#include <linux/linkage.h>
#include <asm/arcregs.h>
/*
* Note on the LD/ST addressing modes with address register write-back
*
* LD.a same as LD.aw
*
* LD.a reg1, [reg2, x] => Pre Incr
* Eff Addr for load = [reg2 + x]
*
* LD.ab reg1, [reg2, x] => Post Incr
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [%sp, -4]
.endm
.macro PUSHAX aux
lr %r9, [\aux]
PUSH %r9
.endm
.macro SAVE_R1_TO_R24
PUSH %r1
PUSH %r2
PUSH %r3
PUSH %r4
PUSH %r5
PUSH %r6
PUSH %r7
PUSH %r8
PUSH %r9
PUSH %r10
PUSH %r11
PUSH %r12
PUSH %r13
PUSH %r14
PUSH %r15
PUSH %r16
PUSH %r17
PUSH %r18
PUSH %r19
PUSH %r20
PUSH %r21
PUSH %r22
PUSH %r23
PUSH %r24
.endm
.macro SAVE_ALL_SYS
/* saving %r0 to reg->r0 in advance since we read %ecr into it */
st %r0, [%sp, -8]
lr %r0, [%ecr] /* all stack addressing is manual so far */
st %r0, [%sp]
st %sp, [%sp, -4]
/* now move %sp to reg->r0 position so we can do "push" automatically */
sub %sp, %sp, 8
SAVE_R1_TO_R24
PUSH %r25
PUSH %gp
PUSH %fp
PUSH %blink
PUSHAX %eret
PUSHAX %erstatus
PUSH %lp_count
PUSHAX %lp_end
PUSHAX %lp_start
PUSHAX %erbta
.endm
.macro SAVE_EXCEPTION_SOURCE
#ifdef CONFIG_MMU
/* If MMU exists exception faulting address is loaded in EFA reg */
lr %r0, [%efa]
#else
/* Otherwise in ERET (exception return) reg */
lr %r0, [%eret]
#endif
.endm
ENTRY(_start)
/* Setup interrupt vector base that matches "__text_start" */
sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
@ -110,70 +30,6 @@ clear_bss:
j board_init_f
ENDPROC(_start)
ENTRY(memory_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_memory_error
ENDPROC(memory_error)
ENTRY(instruction_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_instruction_error
ENDPROC(instruction_error)
ENTRY(interrupt_handler)
/* Todo - save and restore CPU context when interrupts will be in use */
bl do_interrupt_handler
rtie
ENDPROC(interrupt_handler)
ENTRY(EV_MachineCheck)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_machine_check_fault
ENDPROC(EV_MachineCheck)
ENTRY(EV_TLBMissI)
SAVE_ALL_SYS
mov %r0, %sp
j do_itlb_miss
ENDPROC(EV_TLBMissI)
ENTRY(EV_TLBMissD)
SAVE_ALL_SYS
mov %r0, %sp
j do_dtlb_miss
ENDPROC(EV_TLBMissD)
ENTRY(EV_TLBProtV)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_tlb_prot_violation
ENDPROC(EV_TLBProtV)
ENTRY(EV_PrivilegeV)
SAVE_ALL_SYS
mov %r0, %sp
j do_privilege_violation
ENDPROC(EV_PrivilegeV)
ENTRY(EV_Trap)
SAVE_ALL_SYS
mov %r0, %sp
j do_trap
ENDPROC(EV_Trap)
ENTRY(EV_Extension)
SAVE_ALL_SYS
mov %r0, %sp
j do_extension
ENDPROC(EV_Extension)
/*
* void relocate_code (addr_sp, gd, addr_moni)
*

Write Preview
Loading…
Cancel
Save