armv8/fsl-lsch2: refactor the clock system initialization

Up to now, there are 3 kind of SoCs under Layerscape Chassis 2,
like LS1043A, LS1046A and LS1012A. But the clocks tree has a
lot of differences, for instance, the IP modules have different
dividers to derive its clock from Platform PLL. And the core
cluster PLL and platform PLL maybe have different reference
clocks, such as LS1012A. Another problem is which clock/PLL
should be described by sys_info->freq_systembus, it is confused
in Layerscape Chissis 2.

This patch is to bind the sys_info->freq_systembus to the Platform
PLL, and handle the different divider of IP modules separately
between different SoCs, and separate reference clocks of core
cluster PLL and platform PLL.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -163,6 +163,83 @@ config SYS_HAS_SERDES
 
 endmenu
 
+menu "Layerscape clock tree configuration"
+	depends on FSL_LSCH2 || FSL_LSCH3
+
+config SYS_FSL_CLK
+	bool "Enable clock tree initialization"
+	default y
+
+config CLUSTER_CLK_FREQ
+	int "Reference clock of core cluster"
+	depends on ARCH_LS1012A
+	default 100000000
+	help
+	  This number is the reference clock frequency of core PLL.
+	  For most platforms, the core PLL and Platform PLL have the same
+	  reference clock, but for some platforms, LS1012A for instance,
+	  they are provided sepatately.
+
+config SYS_FSL_PCLK_DIV
+	int "Platform clock divider"
+	default 1 if ARCH_LS1043A
+	default 1 if ARCH_LS1046A
+	default 2
+	help
+	  This is the divider that is used to derive Platform clock from
+	  Platform PLL, in another word:
+		Platform_clk = Platform_PLL_freq / this_divider
+
+config SYS_FSL_DSPI_CLK_DIV
+	int "DSPI clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive DSPI clock from Platform
+	  PLL, in another word DSPI_clk = Platform_PLL_freq / this_divider.
+
+config SYS_FSL_DUART_CLK_DIV
+	int "DUART clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive DUART clock from Platform
+	  clock, in another word DUART_clk = Platform_clk / this_divider.
+
+config SYS_FSL_I2C_CLK_DIV
+	int "I2C clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive I2C clock from Platform
+	  clock, in another word I2C_clk = Platform_clk / this_divider.
+
+config SYS_FSL_IFC_CLK_DIV
+	int "IFC clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive IFC clock from Platform
+	  clock, in another word IFC_clk = Platform_clk / this_divider.
+
+config SYS_FSL_LPUART_CLK_DIV
+	int "LPUART clock divider"
+	default 1 if ARCH_LS1043A
+	default 2
+	help
+	  This is the divider that is used to derive LPUART clock from Platform
+	  clock, in another word LPUART_clk = Platform_clk / this_divider.
+
+config SYS_FSL_SDHC_CLK_DIV
+	int "SDHC clock divider"
+	default 1 if ARCH_LS1043A
+	default 1 if ARCH_LS1012A
+	default 2
+	help
+	  This is the divider that is used to derive SDHC clock from Platform
+	  clock, in another word SDHC_clk = Platform_clk / this_divider.
+endmenu
+
 config SYS_FSL_ERRATUM_A008336
 	bool
 

arch/arm/cpu/armv8/fsl-layerscape/cpu.c

@@ -345,8 +345,9 @@ int print_cpuinfo(void)
 		       (type == TY_ITYP_VER_A72 ? "A72" : "   "))),
 		       strmhz(buf, sysinfo.freq_processor[core]));
 	}
+	/* Display platform clock as Bus frequency. */
 	printf("\n       Bus:      %-4s MHz  ",
-	       strmhz(buf, sysinfo.freq_systembus));
+	       strmhz(buf, sysinfo.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV));
 	printf("DDR:      %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
 #ifdef CONFIG_SYS_DPAA_FMAN
 	printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));

arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c

@@ -52,22 +52,28 @@ void get_sys_info(struct sys_info *sys_info)
 	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+	unsigned long cluster_clk;
 
 	sys_info->freq_systembus = sysclk;
+#ifndef CONFIG_CLUSTER_CLK_FREQ
+#define CONFIG_CLUSTER_CLK_FREQ	CONFIG_SYS_CLK_FREQ
+#endif
+	cluster_clk = CONFIG_CLUSTER_CLK_FREQ;
+
 #ifdef CONFIG_DDR_CLK_FREQ
 	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
 #else
 	sys_info->freq_ddrbus = sysclk;
 #endif
 
-#ifdef CONFIG_ARCH_LS1012A
-	sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
-			FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
-			FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
-#else
+	/* The freq_systembus is used to record frequency of platform PLL */
 	sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
 			FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
+
+#ifdef CONFIG_ARCH_LS1012A
+	sys_info->freq_ddrbus = 2 * sys_info->freq_systembus;
+#else
 	sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT) &
 			FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK;
@@ -76,7 +82,7 @@ void get_sys_info(struct sys_info *sys_info)
 	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
 		ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0xff;
 		if (ratio[i] > 4)
-			freq_c_pll[i] = sysclk * ratio[i];
+			freq_c_pll[i] = cluster_clk * ratio[i];
 		else
 			freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
 	}
@@ -91,11 +97,6 @@ void get_sys_info(struct sys_info *sys_info)
 			freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
 
-#ifdef CONFIG_ARCH_LS1012A
-	sys_info->freq_systembus = sys_info->freq_ddrbus / 2;
-	sys_info->freq_ddrbus *= 2;
-#endif
-
 #define HWA_CGA_M1_CLK_SEL	0xe0000000
 #define HWA_CGA_M1_CLK_SHIFT	29
 #ifdef CONFIG_SYS_DPAA_FMAN
@@ -148,7 +149,9 @@ void get_sys_info(struct sys_info *sys_info)
 		break;
 	}
 #else
-	sys_info->freq_sdhc = sys_info->freq_systembus;
+	sys_info->freq_sdhc = (sys_info->freq_systembus /
+				CONFIG_SYS_FSL_PCLK_DIV) /
+				CONFIG_SYS_FSL_SDHC_CLK_DIV;
 #endif
 #endif
 
@@ -166,7 +169,7 @@ int get_clocks(void)
 
 	get_sys_info(&sys_info);
 	gd->cpu_clk = sys_info.freq_processor[0];
-	gd->bus_clk = sys_info.freq_systembus;
+	gd->bus_clk = sys_info.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV;
 	gd->mem_clk = sys_info.freq_ddrbus;
 
 #ifdef CONFIG_FSL_ESDHC
@@ -179,41 +182,73 @@ int get_clocks(void)
 		return 1;
 }
 
+/********************************************
+ * get_bus_freq
+ * return platform clock in Hz
+ *********************************************/
 ulong get_bus_freq(ulong dummy)
 {
+	if (!gd->bus_clk)
+		get_clocks();
+
 	return gd->bus_clk;
 }
 
 ulong get_ddr_freq(ulong dummy)
 {
+	if (!gd->mem_clk)
+		get_clocks();
+
 	return gd->mem_clk;
 }
 
 #ifdef CONFIG_FSL_ESDHC
 int get_sdhc_freq(ulong dummy)
 {
+	if (!gd->arch.sdhc_clk)
+		get_clocks();
+
 	return gd->arch.sdhc_clk;
 }
 #endif
 
 int get_serial_clock(void)
 {
-	return gd->bus_clk;
+	return get_bus_freq(0) / CONFIG_SYS_FSL_DUART_CLK_DIV;
+}
+
+int get_i2c_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_I2C_CLK_DIV;
+}
+
+int get_dspi_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_DSPI_CLK_DIV;
 }
 
+#ifdef CONFIG_FSL_LPUART
+int get_uart_freq(ulong dummy)
+{
+	return get_bus_freq(0) / CONFIG_SYS_FSL_LPUART_CLK_DIV;
+}
+#endif
+
 unsigned int mxc_get_clock(enum mxc_clock clk)
 {
 	switch (clk) {
 	case MXC_I2C_CLK:
-		return get_bus_freq(0);
+		return get_i2c_freq(0);
 #if defined(CONFIG_FSL_ESDHC)
 	case MXC_ESDHC_CLK:
 		return get_sdhc_freq(0);
 #endif
 	case MXC_DSPI_CLK:
-		return get_bus_freq(0);
+		return get_dspi_freq(0);
+#ifdef CONFIG_FSL_LPUART
 	case MXC_UART_CLK:
-		return get_bus_freq(0);
+		return get_uart_freq(0);
+#endif
 	default:
 		printf("Unsupported clock\n");
 	}

arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h

@@ -137,6 +137,7 @@ CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead."
 
 struct sys_info {
 	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	/* frequency of platform PLL */
 	unsigned long freq_systembus;
 	unsigned long freq_ddrbus;
 	unsigned long freq_localbus;

include/configs/ls1012a_common.h

@@ -19,9 +19,7 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x40100000
 
-#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		125000000
+#define CONFIG_SYS_CLK_FREQ		125000000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F	1
@@ -82,7 +80,7 @@
 #define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

include/configs/ls1043a_common.h

@@ -11,7 +11,6 @@
 #define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_LS1043A
 #define CONFIG_MP
-#define CONFIG_SYS_FSL_CLK
 #define CONFIG_GICV2
 
 #include <asm/arch/config.h>
@@ -42,7 +41,7 @@
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

include/configs/ls1046a_common.h

@@ -10,7 +10,6 @@
 #define CONFIG_REMAKE_ELF
 #define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_MP
-#define CONFIG_SYS_FSL_CLK
 #define CONFIG_GICV2
 
 #include <asm/arch/config.h>
@@ -41,7 +40,7 @@
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

include/configs/ls2080aqds.h

@@ -14,8 +14,6 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#define CONFIG_SYS_FSL_CLK
-
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SYS_NO_FLASH
 #undef CONFIG_CMD_IMLS

include/configs/ls2080ardb.h

@@ -32,7 +32,6 @@
 unsigned long get_board_sys_clk(void);
 #endif
 
-#define CONFIG_SYS_FSL_CLK
 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ		133333333
 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ/4)