diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index f2c9687..fc6a475 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -72,6 +72,10 @@
 
 #define DCU_LAYER_MAX_NUM			16
 
+#define QE_MURAM_SIZE          0x6000UL
+#define MAX_QE_RISC            1
+#define QE_NUM_OF_SNUM         28
+
 #define CONFIG_SYS_FSL_SRDS_1
 
 #ifdef CONFIG_LS102XA
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index c69d064..438f128 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -17,6 +17,14 @@ struct arch_global_data {
 #if defined(CONFIG_FSL_ESDHC)
 	u32 sdhc_clk;
 #endif
+
+#if defined(CONFIG_U_QE)
+	u32 qe_clk;
+	u32 brg_clk;
+	uint mp_alloc_base;
+	uint mp_alloc_top;
+#endif /* CONFIG_U_QE */
+
 #ifdef CONFIG_AT91FAMILY
 	/* "static data" needed by at91's clock.c */
 	unsigned long	cpu_clk_rate_hz;
diff --git a/drivers/Makefile b/drivers/Makefile
index 33227c8..3c96524 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -16,6 +16,7 @@ obj-y += twserial/
 obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
+obj-$(CONFIG_U_QE) += qe/
 obj-y += memory/
 obj-y += pwm/
 obj-y += input/
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
index 7f1bd06..8fa4866 100644
--- a/drivers/qe/Makefile
+++ b/drivers/qe/Makefile
@@ -4,5 +4,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y := qe.o uccf.o uec.o uec_phy.o
+obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o
+obj-$(CONFIG_U_QE) += qe.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index d9a7d82..dfae4bf 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -12,6 +12,7 @@
 #include <fdt_support.h>
 #include "qe.h"
 
+#ifdef CONFIG_QE
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -72,3 +73,4 @@ void ft_qe_setup(void *blob)
 		"clock-frequency", gd->arch.qe_clk / 2, 1);
 	fdt_fixup_qe_firmware(blob);
 }
+#endif
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 4358a91..b545ec9 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -40,6 +40,7 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
 	return;
 }
 
+#ifdef CONFIG_QE
 uint qe_muram_alloc(uint size, uint align)
 {
 	uint	retloc;
@@ -70,6 +71,7 @@ uint qe_muram_alloc(uint size, uint align)
 
 	return retloc;
 }
+#endif
 
 void *qe_muram_addr(uint offset)
 {
@@ -180,6 +182,17 @@ void qe_init(uint qe_base)
 	qe_snums_init();
 }
 
+#ifdef CONFIG_U_QE
+void u_qe_init(void)
+{
+	uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */
+	qe_immr = (qe_map_t *)qe_base;
+
+	qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
+	out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+}
+#endif
+
 void qe_reset(void)
 {
 	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
@@ -212,6 +225,7 @@ void qe_assign_page(uint snum, uint para_ram_base)
 
 #define BRG_CLK		(gd->arch.brg_clk)
 
+#ifdef CONFIG_QE
 int qe_set_brg(uint brg, uint rate)
 {
 	volatile uint	*bp;
@@ -239,6 +253,7 @@ int qe_set_brg(uint brg, uint rate)
 
 	return 0;
 }
+#endif
 
 /* Set ethernet MII clock master
 */
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index ebb7c5f..30484b8 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -275,6 +275,7 @@ void *qe_muram_addr(uint offset);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 void qe_init(uint qe_base);
+void u_qe_init(void);
 void qe_reset(void);
 void qe_assign_page(uint snum, uint para_ram_base);
 int qe_set_brg(uint brg, uint rate);