From 9d044fcb8c4558d7ec28089375d2de565bfd2619 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Fri, 3 Jun 2016 18:41:34 +0530 Subject: [PATCH] armv8: ls1012a: Add support of ls1012aqds board QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson Signed-off-by: Pratiyush Mohan Srivastava Signed-off-by: Abhimanyu Saini Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun --- arch/arm/Kconfig | 10 ++ arch/arm/dts/Makefile | 3 +- arch/arm/dts/fsl-ls1012a-qds.dts | 14 ++ arch/arm/dts/fsl-ls1012a-qds.dtsi | 123 ++++++++++++++ arch/arm/dts/fsl-ls1012a.dtsi | 119 +++++++++++++ board/freescale/ls1012aqds/Kconfig | 15 ++ board/freescale/ls1012aqds/MAINTAINERS | 6 + board/freescale/ls1012aqds/Makefile | 7 + board/freescale/ls1012aqds/README | 59 +++++++ board/freescale/ls1012aqds/ls1012aqds.c | 234 ++++++++++++++++++++++++++ board/freescale/ls1012aqds/ls1012aqds_qixis.h | 35 ++++ configs/ls1012aqds_qspi_defconfig | 32 ++++ include/configs/ls1012a_common.h | 145 ++++++++++++++++ include/configs/ls1012aqds.h | 191 +++++++++++++++++++++ 14 files changed, 992 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/fsl-ls1012a-qds.dts create mode 100644 arch/arm/dts/fsl-ls1012a-qds.dtsi create mode 100644 arch/arm/dts/fsl-ls1012a.dtsi create mode 100644 board/freescale/ls1012aqds/Kconfig create mode 100644 board/freescale/ls1012aqds/MAINTAINERS create mode 100644 board/freescale/ls1012aqds/Makefile create mode 100644 board/freescale/ls1012aqds/README create mode 100644 board/freescale/ls1012aqds/ls1012aqds.c create mode 100644 board/freescale/ls1012aqds/ls1012aqds_qixis.h create mode 100644 configs/ls1012aqds_qspi_defconfig create mode 100644 include/configs/ls1012a_common.h create mode 100644 include/configs/ls1012aqds.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7a77b6a..30fc32a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -696,6 +696,15 @@ config TARGET_HIKEY Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. +config TARGET_LS1012AQDS + bool "Support ls1012aqds" + select ARM64 + help + Support for Freescale LS1012AQDS platform. + The LS1012A Development System (QDS) is a high-performance + development platform that supports the QorIQ LS1012A + Layerscape Architecture processor. + config TARGET_LS1021AQDS bool "Support ls1021aqds" select CPU_V7 @@ -852,6 +861,7 @@ source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1043aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" source "board/freescale/ls1043ardb/Kconfig" +source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/mx23evk/Kconfig" source "board/freescale/mx25pdk/Kconfig" source "board/freescale/mx28evk/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 92c7545..47ec7a2 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -120,7 +120,8 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2080a-rdb.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1043a-qds-lpuart.dtb \ - fsl-ls1043a-rdb.dtb + fsl-ls1043a-rdb.dtb \ + fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb diff --git a/arch/arm/dts/fsl-ls1012a-qds.dts b/arch/arm/dts/fsl-ls1012a-qds.dts new file mode 100644 index 0000000..76db36c --- /dev/null +++ b/arch/arm/dts/fsl-ls1012a-qds.dts @@ -0,0 +1,14 @@ +/* + * Copyright 2016 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "fsl-ls1012a-qds.dtsi" + +/ { + chosen { + stdout-path = &duart0; + }; +}; diff --git a/arch/arm/dts/fsl-ls1012a-qds.dtsi b/arch/arm/dts/fsl-ls1012a-qds.dtsi new file mode 100644 index 0000000..dde7134 --- /dev/null +++ b/arch/arm/dts/fsl-ls1012a-qds.dtsi @@ -0,0 +1,123 @@ +/* + * Copyright 2016 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A QDS Board"; + aliases { + spi0 = &qspi; + spi1 = &dspi0; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + reg = <0>; + spi-max-frequency = <1000000>; /* input clock */ + }; + + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3500000>; + reg = <1>; + }; + + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3500000>; + reg = <2>; + }; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: s25fl128s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; + pca9547@77 { + compatible = "philips,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + /* IRQ10_B */ + interrupts = <0 150 0x4>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + eeprom@56 { + compatible = "at24,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "at24,24c512"; + reg = <0x57>; + }; + + adt7461a@4c { + compatible = "adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi new file mode 100644 index 0000000..546a87a --- /dev/null +++ b/arch/arm/dts/fsl-ls1012a.dtsi @@ -0,0 +1,119 @@ +/* + * Copyright 2016 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton64.dtsi" + +/ { + compatible = "fsl,ls1012a"; + interrupt-parent = <&gic>; + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&clockgen 1 0>; + }; + + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + gic: interrupt-controller@1400000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ + <0x0 0x1402000 0 0x2000>, /* GICC */ + <0x0 0x1404000 0 0x2000>, /* GICH */ + <0x0 0x1406000 0 0x2000>; /* GICV */ + interrupts = <1 9 0xf08>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1012a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + dspi0: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 64 0x4>; + clock-names = "dspi"; + clocks = <&clockgen 4 0>; + num-cs = <6>; + big-endian; + status = "disabled"; + }; + + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <0 56 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <0 57 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <0 54 0x4>; + clocks = <&clockgen 4 0>; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <0 54 0x4>; + clocks = <&clockgen 4 0>; + }; + + qspi: quadspi@1550000 { + compatible = "fsl,vf610-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x4000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + num-cs = <2>; + big-endian; + status = "disabled"; + }; + + }; +}; diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig new file mode 100644 index 0000000..1257ec8 --- /dev/null +++ b/board/freescale/ls1012aqds/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1012AQDS + +config SYS_BOARD + default "ls1012aqds" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1012aqds" + +endif diff --git a/board/freescale/ls1012aqds/MAINTAINERS b/board/freescale/ls1012aqds/MAINTAINERS new file mode 100644 index 0000000..27c4aff --- /dev/null +++ b/board/freescale/ls1012aqds/MAINTAINERS @@ -0,0 +1,6 @@ +LS1012AQDS BOARD +M: Prabhakar Kushwaha +S: Maintained +F: board/freescale/ls1012aqds/ +F: include/configs/ls1012aqds.h +F: configs/ls1012aqds_qspi_defconfig diff --git a/board/freescale/ls1012aqds/Makefile b/board/freescale/ls1012aqds/Makefile new file mode 100644 index 0000000..0b813f9 --- /dev/null +++ b/board/freescale/ls1012aqds/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1012aqds.o diff --git a/board/freescale/ls1012aqds/README b/board/freescale/ls1012aqds/README new file mode 100644 index 0000000..dee4b30 --- /dev/null +++ b/board/freescale/ls1012aqds/README @@ -0,0 +1,59 @@ +Overview +-------- +QorIQ LS1012A Development System (LS1012AQDS) is a high-performance +development platform, with a complete debugging environment. +The LS1012AQDS board supports the QorIQ LS1012A processor and is +optimized to support the high-bandwidth DDR3L memory and +a full complement of high-speed SerDes ports. + +LS1012A SoC Overview +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A +SoC overview. + +LS1012AQDS board Overview +----------------------- + - SERDES Connections, 4 lanes supporting: + - PCI Express - 3.0 + - SGMII, SGMII 2.5 + - SATA 3.0 + - DDR Controller + - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s + - QSPI Controller + - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select + signals to QSPI NOR flash memory (2 virtual banks) and the QSPI + emulator + - USB 3.0 + - One USB 3.0 controller with integrated PHY + - One high-speed USB 3.0 port + - USB 2.0 + - One USB 2.0 controller with ULPI interface + - Two enhanced secure digital host controllers: + - SDHC1 controller can be connected to onboard SDHC connector + - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices + - 2 I2C controllers + - One SATA onboard connectors + - UART + - 5 SAI + - One SAI port with audio codec SGTL5000: + • Provides MIC bias + • Provides headphone and line output + - One SAI port terminated at 2x6 header + - Three SAI Tx/Rx ports terminated at 2x3 headers + - ARM JTAG support + +Booting Options +--------------- +a) QSPI Flash Emu Boot +b) QSPI Flash 1 +c) QSPI Flash 2 + +QSPI flash map +-------------- +Images | Size |QSPI Flash Address +------------------------------------------ +RCW + PBI | 1MB | 0x4000_0000 +U-boot | 1MB | 0x4010_0000 +U-boot Env | 1MB | 0x4020_0000 +PPA FIT image | 2MB | 0x4050_0000 +Linux ITB | ~53MB | 0x40A0_0000 diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c new file mode 100644 index 0000000..71eea82 --- /dev/null +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -0,0 +1,234 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/qixis.h" +#include "ls1012aqds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits) +{ + int timeout = 1000; + + out_be32(ptr, value); + + while (in_be32(ptr) & bits) { + udelay(100); + timeout--; + } + if (timeout <= 0) + puts("Error: wait for clear timeout.\n"); +} + +int checkboard(void) +{ + char buf[64]; + u8 sw; + + sw = QIXIS_READ(arch); + printf("Board Arch: V%d, ", sw >> 4); + printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1); + + sw = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]); + + if (sw & QIXIS_LBMAP_ALTBANK) + printf("flash: 2\n"); + else + printf("flash: 1\n"); + + printf("FPGA: v%d (%s), build %d", + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); + + /* the timestamp string contains "\n" at the end */ + printf(" on %s", qixis_read_time(buf)); + return 0; +} + +void mmdc_init(void) +{ + struct mmdc_p_regs *mmdc = + (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR; + + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + /* configure timing parms */ + out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING); + out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0); + out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1); + out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2); + + /* other parms */ + out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC); + out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT); + out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY); + out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL); + + /* out of reset delays */ + out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY); + + /* physical parms */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1); + out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION); + + /* Enable MMDC */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2); + + /* dram init sequence: update MRs */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) | + CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0)); + + /* dram init sequence: ZQCL */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0)); + set_wait_for_bits_clear(&mmdc->mpzqhwctrl, + CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL, + FORCE_ZQ_AUTO_CALIBRATION); + + /* Calibrations now: wr lvl */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) | + CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL)); + set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN); + + mdelay(1); + + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + mdelay(1); + + /* Calibrations now: Read DQS gating calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG); + set_wait_for_bits_clear(&mmdc->mpdgctrl0, + AUTO_RD_DQS_GATING_CALIBRATION_EN, + AUTO_RD_DQS_GATING_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* Calibrations now: Read calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + set_wait_for_bits_clear(&mmdc->mprddlhwctl, + AUTO_RD_CALIBRATION_EN, + AUTO_RD_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* PD, SR */ + out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL); + out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT); + + /* refresh scheme */ + set_wait_for_bits_clear(&mmdc->mdref, + CONFIG_SYS_MMDC_CORE_REFRESH_CTL, + START_REFRESH); + + /* disable CON_REQ */ + out_be32(&mmdc->mdscr, DISABLE_CFG_REQ); +} + +int dram_init(void) +{ + mmdc_init(); + + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + u8 mux_sdhc_cd = 0x80; + + i2c_set_bus_num(0); + + i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1); + return 0; +} +#endif + +int board_init(void) +{ + struct ccsr_cci400 *cci = (struct ccsr_cci400 *) + CONFIG_SYS_CCI400_ADDR; + + /* Set CCI-400 control override register to enable barrier + * transaction */ + out_le32(&cci->ctrl_ord, + CCI400_CTRLORD_EN_BARRIER); + +#ifdef CONFIG_LAYERSCAPE_NS_ACCESS + enable_layerscape_ns_access(); +#endif + +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + arch_fixup_fdt(blob); + + ft_cpu_setup(blob, bd); + + return 0; +} +#endif diff --git a/board/freescale/ls1012aqds/ls1012aqds_qixis.h b/board/freescale/ls1012aqds/ls1012aqds_qixis.h new file mode 100644 index 0000000..584f604 --- /dev/null +++ b/board/freescale/ls1012aqds/ls1012aqds_qixis.h @@ -0,0 +1,35 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1043AQDS_QIXIS_H__ +#define __LS1043AQDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for LS1043AQDS */ + +/* BRDCFG4[4:7] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xe0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +/* BRDCFG2 - SD clock*/ +#define QIXIS_SDCLK1_100 0x0 +#define QIXIS_SDCLK1_125 0x1 +#define QIXIS_SDCLK1_165 0x2 +#define QIXIS_SDCLK1_100_SP 0x3 + +#endif diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig new file mode 100644 index 0000000..2bc178c --- /dev/null +++ b/configs/ls1012aqds_qspi_defconfig @@ -0,0 +1,32 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1012AQDS=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_SPI_FLASH=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_DSPI=y diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h new file mode 100644 index 0000000..ccd94ec --- /dev/null +++ b/include/configs/ls1012a_common.h @@ -0,0 +1,145 @@ +/* + * Copyright 2016 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1012A_COMMON_H +#define __LS1012A_COMMON_H + +#define CONFIG_FSL_LAYERSCAPE +#define CONFIG_FSL_LSCH2 +#define CONFIG_LS1012A +#define CONFIG_GICV2 + +#define CONFIG_SYS_HAS_SERDES + +#include +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SUPPORT_RAW_INITRD + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#define CONFIG_SYS_TEXT_BASE 0x40100000 + +#define CONFIG_SYS_FSL_CLK +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 125000000 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F 1 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ/4 /* 25MHz */ + +/* CSU */ +#define CONFIG_LAYERSCAPE_NS_ACCESS + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/*SPI device */ +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 1000000 +#define CONFIG_ENV_SPI_MODE 0x03 +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_FSL_SPI_INTERFACE +#define CONFIG_SF_DATAFLASH + +#define CONFIG_FSL_QSPI +#define QSPI0_AMBA_BASE 0x40000000 +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_BAR + +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x40000 /* 256KB */ +#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */ +#define CONFIG_ENV_SECT_SIZE 0x40000 +#endif + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Command line configuration */ +#define CONFIG_CMD_ENV +#undef CONFIG_CMD_IMLS + +#define CONFIG_ARCH_EARLY_INIT_R + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +#define CONFIG_DISPLAY_CPUINFO + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "initrd_high=0xffffffff\0" \ + "verify=no\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0xa00000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "console=ttyAMA0,38400n8\0" + +#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0500" +#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ + "$kernel_start $kernel_size && "\ + "bootm $kernel_load" +#define CONFIG_BOOTDELAY 10 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#define CONFIG_PANIC_HANG +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#include + +#endif /* __LS1012A_COMMON_H */ diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h new file mode 100644 index 0000000..2d84095 --- /dev/null +++ b/include/configs/ls1012aqds.h @@ -0,0 +1,191 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1012AQDS_H__ +#define __LS1012AQDS_H__ + +#include "ls1012a_common.h" + + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x05180000 +#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x85180000 + +/* + * QIXIS Definitions + */ +#define CONFIG_FSL_QIXIS + +#ifdef CONFIG_FSL_QIXIS +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_BRDCFG_REG 0x04 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0xf7 +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x08 +#define QIXIS_RST_CTL_RESET 0x41 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#endif + +/* + * I2C bus multiplexer + */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ +#define I2C_RETIMER_ADDR 0x18 +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_CH7301 0xC +#define I2C_MUX_CH5 0xD +#define I2C_MUX_CH7 0xF + +#define I2C_MUX_CH_VOL_MONITOR 0xa + +/* +* RTC configuration +*/ +#define RTC +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CONFIG_CMD_DATE + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* DSPI */ +#define CONFIG_FSL_DSPI1 +#define CONFIG_DEFAULT_SPI_BUS 1 + +#define CONFIG_CMD_SPI +#define MMAP_DSPI DSPI1_BASE_ADDR + +#define CONFIG_SYS_DSPI_CTAR0 1 + +#define CONFIG_SYS_DSPI_CTAR1 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ + DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(0)) +#define CONFIG_SPI_FLASH_SST /* cs1 */ + +#define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ + DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(0)) +#define CONFIG_SPI_FLASH_STMICRO /* cs2 */ + +#define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ + DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(0)) +#define CONFIG_SPI_FLASH_EON /* cs3 */ + +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_CS 0 + +/* +* USB +*/ +/* EHCI Support - disbaled by default */ +/*#define CONFIG_HAS_FSL_DR_USB*/ + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif + +/*XHCI Support - enabled by default*/ +#define CONFIG_HAS_FSL_XHCI_USB + +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_XHCI_DWC3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE +#endif + +/* MMC */ +#define CONFIG_MMC +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#endif + +/* SATA */ +#define CONFIG_LIBATA +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_CMD_SCSI +#define CONFIG_DOS_PARTITION +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_SATA AHCI_BASE_ADDR + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ +#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie" + +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_MISC_INIT_R + +#endif /* __LS1012AQDS_H__ */