Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

nitrogen6x: power-down miscellanous peripherals

Browse Source 
Ensure that cameras and USB OTG power are in a stable (reset)
state at reset by configuring their pads and toggling GPIOs.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
master
Eric Nelson 10 years ago committed by Stefano Babic
parent 41612472b6
commit a3b527a947
1 changed files with 43 additions and 4 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 47
      board/boundary/nitrogen6x/nitrogen6x.c

47
board/boundary/nitrogen6x/nitrogen6x.c
Unescape View File

@ -622,17 +622,56 @@ static void setup_display(void)
}
#endif
/* wl1271 pads on nitrogen6x */
static iomux_v3_cfg_t const init_pads[] = {
/* WL12XX_WL_IRQ_GP */
NEW_PAD_CTRL(MX6_PAD_NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN),
/* WL12XX_WL_ENABLE_GP */
NEW_PAD_CTRL(MX6_PAD_NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM),
/* WL12XX_BT_ENABLE_GP */
NEW_PAD_CTRL(MX6_PAD_NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM),
/* USB otg power */
NEW_PAD_CTRL(MX6_PAD_EIM_D22__GPIO3_IO22, OUTPUT_40OHM),
NEW_PAD_CTRL(MX6_PAD_NANDF_D5__GPIO2_IO05, OUTPUT_40OHM),
NEW_PAD_CTRL(MX6_PAD_NANDF_WP_B__GPIO6_IO09, OUTPUT_40OHM),
NEW_PAD_CTRL(MX6_PAD_GPIO_8__GPIO1_IO08, OUTPUT_40OHM),
NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06, OUTPUT_40OHM),
};
#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14)
static unsigned gpios_out_low[] = {
/* Disable wl1271 */
IMX_GPIO_NR(6, 15), /* disable wireless */
IMX_GPIO_NR(6, 16), /* disable bluetooth */
IMX_GPIO_NR(3, 22), /* disable USB otg power */
IMX_GPIO_NR(2, 5), /* ov5640 mipi camera reset */
IMX_GPIO_NR(1, 8), /* ov5642 reset */
};
static unsigned gpios_out_high[] = {
IMX_GPIO_NR(1, 6), /* ov5642 powerdown */
IMX_GPIO_NR(6, 9), /* ov5640 mipi camera power down */
};
static void set_gpios(unsigned *p, int cnt, int val)
{
int i;
for (i = 0; i < cnt; i++)
gpio_direction_output(*p++, val);
}
int board_early_init_f(void)
{
setup_iomux_uart();
/* Disable wl1271 For Nitrogen6w */
set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1);
set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0);
gpio_direction_input(WL12XX_WL_IRQ_GP);
gpio_direction_output(WL12XX_WL_ENABLE_GP, 0);
gpio_direction_output(WL12XX_BT_ENABLE_GP, 0);
gpio_direction_output(GP_USB_OTG_PWR, 0); /* OTG power off */
imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads));
imx_iomux_v3_setup_multiple_pads(init_pads, ARRAY_SIZE(init_pads));
setup_buttons();
#if defined(CONFIG_VIDEO_IPUV3)

Write Preview
Loading…
Cancel
Save