apalis/colibri_t20/t30: integrate recovery mode detection

Allow detecting whether or not U-Boot was launched through the
recovery mode of the resp. NVIDIA SoC.

Make use of a board specific arch_misc_init() and enable the same via
CONFIG_ARCH_MISC_INIT configuration option.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

board/toradex/apalis_t30/apalis_t30.c

@@ -9,7 +9,10 @@
 #include <dm.h>
 #include <asm/arch/gp_padctrl.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/tegra.h>
 #include <asm/gpio.h>
+#include <asm/io.h>
 #include <i2c.h>
 #include <netdev.h>
 
@@ -18,6 +21,15 @@
 #define PMU_I2C_ADDRESS		0x2D
 #define MAX_I2C_RETRY		3
 
+int arch_misc_init(void)
+{
+	if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
+	    NVBOOTTYPE_RECOVERY)
+		printf("USB recovery mode\n");
+
+	return 0;
+}
+
 /*
  * Routine: pinmux_init
  * Description: Do individual peripheral pinmux configs

board/toradex/colibri_t20/colibri_t20.c

@@ -8,8 +8,20 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/ap.h>
 #include <asm/arch-tegra/board.h>
+#include <asm/arch-tegra/tegra.h>
 #include <asm/gpio.h>
+#include <asm/io.h>
+
+int arch_misc_init(void)
+{
+	if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
+	    NVBOOTTYPE_RECOVERY)
+		printf("USB recovery mode\n");
+
+	return 0;
+}
 
 #ifdef CONFIG_TEGRA_MMC
 /*

board/toradex/colibri_t30/colibri_t30.c

@@ -8,10 +8,22 @@
 #include <common.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/gp_padctrl.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch-tegra/tegra.h>
+#include <asm/io.h>
 #include "pinmux-config-colibri_t30.h"
 #include <i2c.h>
 #include <asm/gpio.h>
 
+int arch_misc_init(void)
+{
+	if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
+	    NVBOOTTYPE_RECOVERY)
+		printf("USB recovery mode\n");
+
+	return 0;
+}
+
 /*
  * Routine: pinmux_init
  * Description: Do individual peripheral pinmux configs

include/configs/apalis_t30.h

@@ -11,6 +11,8 @@
 
 #include "tegra30-common.h"
 
+#define CONFIG_ARCH_MISC_INIT
+
 /* High-level configuration options */
 #define CONFIG_TEGRA_BOARD_STRING	"Toradex Apalis T30"
 

include/configs/colibri_t20.h

@@ -9,6 +9,8 @@
 
 #include "tegra20-common.h"
 
+#define CONFIG_ARCH_MISC_INIT
+
 /* High-level configuration options */
 #define CONFIG_TEGRA_BOARD_STRING	"Toradex Colibri T20"
 

include/configs/colibri_t30.h

@@ -11,6 +11,8 @@
 
 #include "tegra30-common.h"
 
+#define CONFIG_ARCH_MISC_INIT
+
 /* High-level configuration options */
 #define CONFIG_TEGRA_BOARD_STRING	"Toradex Colibri T30"