integrator: consolidate flash info

This consolidates the flash settings for the Integrator
and activates the new ARM flash image support for them
so images can be loaded by name from flash.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

include/configs/integrator-common.h

@@ -86,3 +86,25 @@
 				    CONFIG_SYS_INIT_RAM_SIZE - \
 				    GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * FLASH and environment organization
+ * Top varies according to amount fitted
+ * Reserve top 4 blocks of flash
+ * - ARM Boot Monitor
+ * - Unused
+ * - SIB block
+ * - U-Boot environment
+ */
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ARMFLASH
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_BASE		0x24000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+
+/* Timeout values in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */
+#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */

include/configs/integratorap.h

@@ -55,22 +55,12 @@
  */
 #define CONFIG_SYS_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
 
-#define CONFIG_SYS_FLASH_BASE	0x24000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
+/* Flash settings */
+#define CONFIG_SYS_FLASH_SIZE		0x02000000 /* 32 MiB */
 #define CONFIG_SYS_MAX_FLASH_SECT	128
+#define CONFIG_ENV_IS_NOWHERE		1
 #define CONFIG_ENV_SIZE			32768
 
-
 /*-----------------------------------------------------------------------
  * PCI definitions
  */

include/configs/integratorcp.h

@@ -55,28 +55,10 @@
  */
 #define CONFIG_SYS_PROMPT	"Integrator-CP # "	/* Monitor Command Prompt */
 
-/*
- * FLASH and environment organization
- * Top varies according to amount fitted
- * Reserve top 4 blocks of flash
- * - ARM Boot Monitor
- * - Unused
- * - SIB block
- * - U-Boot environment
- *
- * Base is always 0x24000000
- */
-#define CONFIG_SYS_FLASH_BASE		0x24000000
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#define CONFIG_SYS_MAX_FLASH_SECT	64
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
 #define PHYS_FLASH_SIZE			0x01000000	/* 16MB */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
-
-#define CONFIG_SYS_MONITOR_LEN		0x00100000
+#define CONFIG_SYS_MAX_FLASH_SECT	64
 #define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_SYS_MONITOR_LEN		0x00100000
 
 /*
  * Move up the U-Boot & monitor area if more flash is fitted.