This patch series unifies the AMCC eval board ports by introducing a common include header for all AMCC eval boards: include/configs/amcc-common.h This header now includes all common configuration options/defines which are removed from the board specific headers. The reason for this is ease of maintenance and unified look and feel of all AMCC boards. Signed-off-by: Stefan Roese <sr@denx.de>master
Stefan Roese
17 years ago
parent
63a0afa0c3
commit
a8a11a9ed0
@ -0,0 +1,259 @@ |
||||
/*
|
||||
* (C) Copyright 2008 |
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de. |
||||
* |
||||
* Common configuration options for all AMCC boards |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#ifndef __AMCC_COMMON_H |
||||
#define __AMCC_COMMON_H |
||||
|
||||
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ |
||||
#define CFG_MONITOR_BASE TEXT_BASE /* Start of U-Boot */ |
||||
#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1) |
||||
#define CFG_MALLOC_LEN (1 << 20) /* Reserved for malloc */ |
||||
|
||||
/*
|
||||
* UART |
||||
*/ |
||||
#define CONFIG_BAUDRATE 115200 |
||||
#define CONFIG_SERIAL_MULTI |
||||
#define CFG_BAUDRATE_TABLE \ |
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
||||
|
||||
/*
|
||||
* I2C |
||||
*/ |
||||
#define CONFIG_HARD_I2C /* I2C with hardware support */ |
||||
#define CFG_I2C_SLAVE 0x7F |
||||
|
||||
/*
|
||||
* Ethernet/EMAC/PHY |
||||
*/ |
||||
#define CONFIG_MII /* MII PHY management */ |
||||
#define CONFIG_NET_MULTI |
||||
#define CONFIG_NETCONSOLE /* include NetConsole support */ |
||||
#if defined(CONFIG_440) |
||||
#define CFG_RX_ETH_BUFFER 32 /* number of eth rx buffers */ |
||||
#else |
||||
#define CFG_RX_ETH_BUFFER 16 /* number of eth rx buffers */ |
||||
#endif |
||||
|
||||
/*
|
||||
* Commands |
||||
*/ |
||||
#include <config_cmd_default.h> |
||||
|
||||
#define CONFIG_CMD_ASKENV |
||||
#if defined(CONFIG_440) |
||||
#define CONFIG_CMD_CACHE |
||||
#endif |
||||
#define CONFIG_CMD_DHCP |
||||
#define CONFIG_CMD_DIAG |
||||
#define CONFIG_CMD_EEPROM |
||||
#define CONFIG_CMD_ELF |
||||
#define CONFIG_CMD_I2C |
||||
#define CONFIG_CMD_IRQ |
||||
#define CONFIG_CMD_MII |
||||
#define CONFIG_CMD_NET |
||||
#define CONFIG_CMD_NFS |
||||
#define CONFIG_CMD_PING |
||||
#define CONFIG_CMD_REGINFO |
||||
|
||||
/*
|
||||
* Miscellaneous configurable options |
||||
*/ |
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
||||
#define CFG_LONGHELP /* undef to save memory */ |
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
||||
#if defined(CONFIG_CMD_KGDB) |
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
||||
#else |
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
||||
#endif |
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) |
||||
#define CFG_MAXARGS 16 /* max number of command args */ |
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
||||
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ |
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ |
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */ |
||||
#define CFG_EXTBDINFO /* To use extended board_into (bd_t) */ |
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ |
||||
|
||||
#define CONFIG_CMDLINE_EDITING /* add command line history */ |
||||
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
||||
#define CONFIG_LOOPW /* enable loopw command */ |
||||
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ |
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
||||
#define CONFIG_VERSION_VARIABLE /* include version env variable */ |
||||
#define CFG_CONSOLE_INFO_QUIET /* don't print console @ startup*/ |
||||
|
||||
#define CFG_HUSH_PARSER /* Use the HUSH parser */ |
||||
#ifdef CFG_HUSH_PARSER |
||||
#define CFG_PROMPT_HUSH_PS2 "> " |
||||
#endif |
||||
|
||||
#define CONFIG_LOADS_ECHO /* echo on for serial download */ |
||||
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ |
||||
|
||||
/*
|
||||
* BOOTP options |
||||
*/ |
||||
#define CONFIG_BOOTP_BOOTFILESIZE |
||||
#define CONFIG_BOOTP_BOOTPATH |
||||
#define CONFIG_BOOTP_GATEWAY |
||||
#define CONFIG_BOOTP_HOSTNAME |
||||
#define CONFIG_BOOTP_SUBNETMASK |
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data |
||||
* have to be in the first 8 MB of memory, since this is |
||||
* the maximum mapped by the Linux kernel during initialization. |
||||
*/ |
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
||||
|
||||
/*
|
||||
* Internal Definitions |
||||
*/ |
||||
#if defined(CONFIG_CMD_KGDB) |
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ |
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
||||
#endif |
||||
|
||||
/*
|
||||
* Pass open firmware flat tree |
||||
*/ |
||||
#define CONFIG_OF_LIBFDT |
||||
#define CONFIG_OF_BOARD_SETUP |
||||
|
||||
/*
|
||||
* Booting and default environment |
||||
*/ |
||||
#define CONFIG_PREBOOT "echo;" \ |
||||
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
||||
"echo" |
||||
#define CONFIG_BOOTCOMMAND "run flash_self" |
||||
|
||||
/*
|
||||
* Only very few boards have default console not on ttyS0 (like Taishan) |
||||
*/ |
||||
#if !defined(CONFIG_USE_TTY) |
||||
#define CONFIG_USE_TTY ttyS0 |
||||
#endif |
||||
|
||||
/*
|
||||
* Only some 4xx PPC's are equipped with an FPU |
||||
*/ |
||||
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ |
||||
defined(CONFIG_460EX) || defined(CONFIG_460GT) |
||||
#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" |
||||
#else |
||||
#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0" |
||||
#endif |
||||
|
||||
/*
|
||||
* Only some boards need to extend the bootargs by some additional |
||||
* parameters (like Makalu) |
||||
*/ |
||||
#if !defined(CONFIG_ADDMISC) |
||||
#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0" |
||||
#endif |
||||
|
||||
#define xstr(s) str(s) |
||||
#define str(s) #s |
||||
|
||||
/*
|
||||
* General common environment variables shared on all AMCC eval boards |
||||
*/ |
||||
#define CONFIG_AMCC_DEF_ENV \ |
||||
"netdev=eth0\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"addtty=setenv bootargs ${bootargs}" \
|
||||
" console=" xstr(CONFIG_USE_TTY) ",${baudrate}\0" \
|
||||
CONFIG_ADDMISC \
|
||||
"initrd_high=30000000\0" \
|
||||
"kernel_addr_r=400000\0" \
|
||||
"fdt_addr_r=800000\0" \
|
||||
"hostname=" xstr(CONFIG_HOSTNAME) "\0" \
|
||||
"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
|
||||
CONFIG_AMCC_DEF_ENV_ROOTPATH |
||||
|
||||
/*
|
||||
* Default environment for arch/powerpc booting |
||||
* for boards that are ported to arch/powerpc |
||||
*/ |
||||
#define CONFIG_AMCC_DEF_ENV_POWERPC \ |
||||
"flash_self=run ramargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
||||
"flash_nfs=run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr} - ${fdt_addr}\0" \
|
||||
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
||||
"tftp ${fdt_addr_r} ${fdt_file}; " \
|
||||
"run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||
"fdt_file=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" |
||||
|
||||
/*
|
||||
* Default environment for arch/ppc booting, |
||||
* for boards that are not ported to arch/powerpc yet |
||||
*/ |
||||
#define CONFIG_AMCC_DEF_ENV_PPC \ |
||||
"flash_self=run ramargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"flash_nfs=run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr}\0" \
|
||||
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
|
||||
"run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr_r}\0" |
||||
|
||||
/*
|
||||
* Default environment for arch/ppc booting (old version), |
||||
* for boards that are ported to arch/ppc and arch/powerpc |
||||
*/ |
||||
#define CONFIG_AMCC_DEF_ENV_PPC_OLD \ |
||||
"flash_self_old=run ramargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
||||
"flash_nfs_old=run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr}\0" \
|
||||
"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
|
||||
"run nfsargs addip addtty addmisc;" \
|
||||
"bootm ${kernel_addr_r}\0" |
||||
|
||||
#define CONFIG_AMCC_DEF_ENV_NOR_UPD \ |
||||
"load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
|
||||
"update=protect off " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
|
||||
"era " xstr(CFG_MONITOR_BASE) " FFFFFFFF;" \
|
||||
"cp.b ${fileaddr} " xstr(CFG_MONITOR_BASE) " ${filesize};" \
|
||||
"setenv filesize;saveenv\0" \
|
||||
"upd=run load update\0" \
|
||||
|
||||
#define CONFIG_AMCC_DEF_ENV_NAND_UPD \ |
||||
"nload=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \
|
||||
"nupdate=nand erase 0 100000;nand write 200000 0 100000;" \
|
||||
"setenv filesize;saveenv\0" \
|
||||
"nupd=run nload nupdate\0" |
||||
|
||||
#endif /* __AMCC_COMMON_H */ |
||||
Loading…
Reference in new issue