thermal: imx_thermal: use CPU temperature grade for trip points

Replace the hard-coded values for min/max/passive with values derived from
the CPU temperature grade.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

drivers/thermal/imx_thermal.c

@@ -12,15 +12,13 @@
 #include <fuse.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 #include <dm.h>
 #include <errno.h>
 #include <malloc.h>
 #include <thermal.h>
 #include <imx_thermal.h>
 
-#define TEMPERATURE_MIN		-40
-#define TEMPERATURE_HOT		80
-#define TEMPERATURE_MAX		125
 #define FACTOR0			10000000
 #define FACTOR1			15976
 #define FACTOR2			4297157
@@ -34,14 +32,21 @@
 #define MISC0_REFTOP_SELBIASOFF		(1 << 3)
 #define TEMPSENSE1_MEASURE_FREQ		0xffff
 
+struct thermal_data {
+	unsigned int fuse;
+	int passive;
+	int minc;
+	int maxc;
+};
+
 static int read_cpu_temperature(struct udevice *dev)
 {
 	int temperature;
 	unsigned int reg, n_meas;
 	const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
 	struct anatop_regs *anatop = (struct anatop_regs *)pdata->regs;
-	unsigned int *priv = dev_get_priv(dev);
-	u32 fuse = *priv;
+	struct thermal_data *priv = dev_get_priv(dev);
+	u32 fuse = priv->fuse;
 	int t1, n1;
 	u32 c1, c2;
 	u64 temp64;
@@ -119,11 +124,12 @@ static int read_cpu_temperature(struct udevice *dev)
 
 int imx_thermal_get_temp(struct udevice *dev, int *temp)
 {
+	struct thermal_data *priv = dev_get_priv(dev);
 	int cpu_tmp = 0;
 
 	cpu_tmp = read_cpu_temperature(dev);
-	while (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) {
-		if (cpu_tmp >= TEMPERATURE_HOT) {
+	while (cpu_tmp > priv->minc && cpu_tmp < priv->maxc) {
+		if (cpu_tmp >= priv->passive) {
 			printf("CPU Temperature is %d C, too hot to boot, waiting...\n",
 			       cpu_tmp);
 			udelay(5000000);
@@ -147,7 +153,7 @@ static int imx_thermal_probe(struct udevice *dev)
 	unsigned int fuse = ~0;
 
 	const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
-	unsigned int *priv = dev_get_priv(dev);
+	struct thermal_data *priv = dev_get_priv(dev);
 
 	/* Read Temperature calibration data fuse */
 	fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse);
@@ -158,7 +164,10 @@ static int imx_thermal_probe(struct udevice *dev)
 		return -EPERM;
 	}
 
-	*priv = fuse;
+	/* set passive cooling temp to max - 20C */
+	get_cpu_temp_grade(&priv->minc, &priv->maxc);
+	priv->passive = priv->maxc - 20;
+	priv->fuse = fuse;
 
 	enable_thermal_clk();
 
@@ -170,6 +179,6 @@ U_BOOT_DRIVER(imx_thermal) = {
 	.id	= UCLASS_THERMAL,
 	.ops	= &imx_thermal_ops,
 	.probe	= imx_thermal_probe,
-	.priv_auto_alloc_size = sizeof(unsigned int),
+	.priv_auto_alloc_size = sizeof(struct thermal_data),
 	.flags  = DM_FLAG_PRE_RELOC,
 };