Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arm: baltos: remove TI board leftover

Browse Source 
Remove unneeded pinmux configurations and TI EEPROM struct.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
master
Yegor Yefremov 8 years ago committed by Tom Rini
parent a3a23c97b6
commit a970727067
3 changed files with 0 additions and 125 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      board/vscom/baltos/board.c
  2. 55
      board/vscom/baltos/board.h
  3. 69
      board/vscom/baltos/mux.c

1
board/vscom/baltos/board.c
Unescape View File

@ -415,7 +415,6 @@ int board_eth_init(bd_t *bis)
int rv, n = 0;
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
__maybe_unused struct am335x_baseboard_id header;
/*
* Note here that we're using CPSW1 since that has a 1Gbit PHY while

55
board/vscom/baltos/board.h
Unescape View File

@ -11,24 +11,6 @@
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* TI AM335x parts define a system EEPROM that defines certain sub-fields.
* We use these fields to in turn see what board we are on, and what
* that might require us to set or not set.
*/
#define HDR_NO_OF_MAC_ADDR 3
#define HDR_ETH_ALEN 6
#define HDR_NAME_LEN 8
struct am335x_baseboard_id {
unsigned int magic;
char name[HDR_NAME_LEN];
char version[4];
char serial[12];
char config[32];
char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
};
typedef struct _BSP_VS_HWPARAM // v1.0
{
uint32_t Magic;
@ -41,37 +23,6 @@ typedef struct _BSP_VS_HWPARAM // v1.0
uint8_t MAC3[6]; // WL1271 WLAN
} __attribute__ ((packed)) BSP_VS_HWPARAM;
static inline int board_is_bone(struct am335x_baseboard_id *header)
{
return !strncmp(header->name, "A335BONE", HDR_NAME_LEN);
}
static inline int board_is_bone_lt(struct am335x_baseboard_id *header)
{
return !strncmp(header->name, "A335BNLT", HDR_NAME_LEN);
}
static inline int board_is_evm_sk(struct am335x_baseboard_id *header)
{
return !strncmp("A335X_SK", header->name, HDR_NAME_LEN);
}
static inline int board_is_idk(struct am335x_baseboard_id *header)
{
return !strncmp(header->config, "SKU#02", 6);
}
static inline int board_is_gp_evm(struct am335x_baseboard_id *header)
{
return !strncmp("A33515BB", header->name, HDR_NAME_LEN);
}
static inline int board_is_evm_15_or_later(struct am335x_baseboard_id *header)
{
return (board_is_gp_evm(header) &&
strncmp("1.5", header->version, 3) <= 0);
}
/*
* We have three pin mux functions that must exist. We must be able to enable
* uart0, for initial output and i2c0 to read the main EEPROM. We then have a
@ -79,12 +30,6 @@ static inline int board_is_evm_15_or_later(struct am335x_baseboard_id *header)
* is required on the board.
*/
void enable_uart0_pin_mux(void);
void enable_uart1_pin_mux(void);
void enable_uart2_pin_mux(void);
void enable_uart3_pin_mux(void);
void enable_uart4_pin_mux(void);
void enable_uart5_pin_mux(void);
void enable_i2c0_pin_mux(void);
void enable_i2c1_pin_mux(void);
void enable_board_pin_mux(void);
#endif

69
board/vscom/baltos/mux.c
Unescape View File

@ -27,36 +27,6 @@ static struct module_pin_mux uart0_pin_mux[] = {
{-1},
};
static struct module_pin_mux uart1_pin_mux[] = {
{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */
{-1},
};
static struct module_pin_mux uart2_pin_mux[] = {
{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */
{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */
{-1},
};
static struct module_pin_mux uart3_pin_mux[] = {
{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
{-1},
};
static struct module_pin_mux uart4_pin_mux[] = {
{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */
{OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */
{-1},
};
static struct module_pin_mux uart5_pin_mux[] = {
{OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */
{OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */
{-1},
};
static struct module_pin_mux mmc0_pin_mux[] = {
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
@ -68,14 +38,6 @@ static struct module_pin_mux mmc0_pin_mux[] = {
{-1},
};
static struct module_pin_mux i2c0_pin_mux[] = {
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
{-1},
};
static struct module_pin_mux i2c1_pin_mux[] = {
{OFFSET(spi0_d1), (MODE(2) | RXACTIVE |
PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
@ -144,36 +106,6 @@ void enable_uart0_pin_mux(void)
configure_module_pin_mux(uart0_pin_mux);
}
void enable_uart1_pin_mux(void)
{
configure_module_pin_mux(uart1_pin_mux);
}
void enable_uart2_pin_mux(void)
{
configure_module_pin_mux(uart2_pin_mux);
}
void enable_uart3_pin_mux(void)
{
configure_module_pin_mux(uart3_pin_mux);
}
void enable_uart4_pin_mux(void)
{
configure_module_pin_mux(uart4_pin_mux);
}
void enable_uart5_pin_mux(void)
{
configure_module_pin_mux(uart5_pin_mux);
}
void enable_i2c0_pin_mux(void)
{
configure_module_pin_mux(i2c0_pin_mux);
}
void enable_i2c1_pin_mux(void)
{
configure_module_pin_mux(i2c1_pin_mux);
@ -181,7 +113,6 @@ void enable_i2c1_pin_mux(void)
void enable_board_pin_mux()
{
/* Baltos */
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(gpio0_7_pin_mux);
configure_module_pin_mux(rgmii2_pin_mux);

Write Preview
Loading…
Cancel
Save