This patch adds support for "kwbimage" (Kirkwood Boot Image) image types to the mkimage code. For details refer to docs/README.kwbimage This patch is tested with Sheevaplug board Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Ron Lee <ron@debian.org> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>master
parent
7809fbb9aa
commit
aa0c7a86cd
@ -0,0 +1,93 @@ |
||||
--------------------------------------------- |
||||
Kirkwood Boot Image generation using mkimage |
||||
--------------------------------------------- |
||||
|
||||
This document describes the U-Boot feature as it |
||||
is implemented for the Kirkwood family of SoCs. |
||||
|
||||
The Kirkwood SoC's can boot directly from NAND FLASH, |
||||
SPI FLASH, SATA etc. using its internal bootRom support. |
||||
|
||||
for more details refer section 24.2 of Kirkwood functional specifications. |
||||
ref: www.marvell.com/products/embedded.../kirkwood/index.jsp |
||||
|
||||
Command syntax: |
||||
-------------- |
||||
./tools/mkimage -l <kwboot_file> |
||||
to list the kwb image file details |
||||
|
||||
./tools/mkimage -n <board specific configuration file> \ |
||||
-T kwbimage -a <start address> -e <execution address> \ |
||||
-d <input_raw_binary> <output_kwboot_file> |
||||
|
||||
for ex. |
||||
./tools/mkimage -n ./board/Marvell/openrd_base/kwbimage.cfg \ |
||||
-T kwbimage -a 0x00600000 -e 0x00600000 \ |
||||
-d u-boot.bin u-boot.kwb |
||||
|
||||
kwimage support available with mkimage utility will generate kirkwood boot |
||||
image that can be flashed on the board NAND/SPI flash |
||||
|
||||
Board specific configuration file specifications: |
||||
------------------------------------------------ |
||||
1. This file must present in the $(BOARDDIR) and the name should be |
||||
kwbimage.cfg (since this is used in Makefile) |
||||
2. This file can have empty lines and lines starting with "#" as first |
||||
character to put comments |
||||
3. This file can have configuration command lines as mentioned below, |
||||
any other information in this file is treated as invalid. |
||||
|
||||
Configuration command line syntax: |
||||
--------------------------------- |
||||
1. Each command line is must have two strings, first one command or address |
||||
and second one data string |
||||
2. Following are the valid command strings and associated data strings:- |
||||
Command string data string |
||||
-------------- ----------- |
||||
BOOT_FROM nand/spi/sata |
||||
NAND_ECC_MODE default/rs/hamming/disabled |
||||
NAND_PAGE_SIZE any uint16_t hex value |
||||
SATA_PIO_MODE any uint32_t hex value |
||||
DDR_INIT_DELAY any uint32_t hex value |
||||
DATA regaddr and regdara hex value |
||||
you can have maximum 55 such register programming commands |
||||
|
||||
3. All commands are optional to program |
||||
|
||||
Typical example of kwimage.cfg file: |
||||
----------------------------------- |
||||
|
||||
# Boot Media configurations |
||||
BOOT_FROM nand |
||||
NAND_ECC_MODE default |
||||
NAND_PAGE_SIZE 0x0800 |
||||
|
||||
# Configure RGMII-0 interface pad voltage to 1.8V |
||||
DATA 0xFFD100e0 0x1b1b1b9b |
||||
# DRAM Configuration |
||||
DATA 0xFFD01400 0x43000c30 |
||||
DATA 0xFFD01404 0x37543000 |
||||
DATA 0xFFD01408 0x22125451 |
||||
DATA 0xFFD0140C 0x00000a33 |
||||
DATA 0xFFD01410 0x000000cc |
||||
DATA 0xFFD01414 0x00000000 |
||||
DATA 0xFFD01418 0x00000000 |
||||
DATA 0xFFD0141C 0x00000C52 |
||||
DATA 0xFFD01420 0x00000040 |
||||
DATA 0xFFD01424 0x0000F17F |
||||
DATA 0xFFD01428 0x00085520 |
||||
DATA 0xFFD0147C 0x00008552 |
||||
DATA 0xFFD01504 0x0FFFFFF1 |
||||
DATA 0xFFD01508 0x10000000 |
||||
DATA 0xFFD0150C 0x0FFFFFF5 |
||||
DATA 0xFFD01514 0x00000000 |
||||
DATA 0xFFD0151C 0x00000000 |
||||
DATA 0xFFD01494 0x00030000 |
||||
DATA 0xFFD01498 0x00000000 |
||||
DATA 0xFFD0149C 0x0000E803 |
||||
DATA 0xFFD01480 0x00000001 |
||||
# End of Header extension |
||||
DATA 0x0 0x0 |
||||
|
||||
------------------------------------------------ |
||||
Author: Prafulla Wadaskar <prafulla@marvell.com> |
@ -0,0 +1,405 @@ |
||||
/*
|
||||
* (C) Copyright 2008 |
||||
* Marvell Semiconductor <www.marvell.com> |
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
/* Required to obtain the getline prototype from stdio.h */ |
||||
#define _GNU_SOURCE |
||||
|
||||
#include "mkimage.h" |
||||
#include <image.h> |
||||
#include "kwbimage.h" |
||||
|
||||
/*
|
||||
* Supported commands for configuration file |
||||
*/ |
||||
static table_entry_t kwbimage_cmds[] = { |
||||
{CMD_BOOT_FROM, "BOOT_FROM", "boot comand", }, |
||||
{CMD_NAND_ECC_MODE, "NAND_ECC_MODE", "NAND mode", }, |
||||
{CMD_NAND_PAGE_SIZE, "NAND_PAGE_SIZE", "NAND size", }, |
||||
{CMD_SATA_PIO_MODE, "SATA_PIO_MODE", "SATA mode", }, |
||||
{CMD_DDR_INIT_DELAY, "DDR_INIT_DELAY", "DDR init dly", }, |
||||
{CMD_DATA, "DATA", "Reg Write Data", }, |
||||
{CMD_INVALID, "", "", }, |
||||
}; |
||||
|
||||
/*
|
||||
* Supported Boot options for configuration file |
||||
*/ |
||||
static table_entry_t kwbimage_bootops[] = { |
||||
{IBR_HDR_SPI_ID, "spi", "SPI Flash", }, |
||||
{IBR_HDR_NAND_ID, "nand", "NAND Flash", }, |
||||
{IBR_HDR_SATA_ID, "sata", "Sata port", }, |
||||
{IBR_HDR_PEX_ID, "pex", "PCIe port", }, |
||||
{IBR_HDR_UART_ID, "uart", "Serial port", }, |
||||
{-1, "", "Invalid", }, |
||||
}; |
||||
|
||||
/*
|
||||
* Supported NAND ecc options configuration file |
||||
*/ |
||||
static table_entry_t kwbimage_eccmodes[] = { |
||||
{IBR_HDR_ECC_DEFAULT, "default", "Default mode", }, |
||||
{IBR_HDR_ECC_FORCED_HAMMING, "hamming", "Hamming mode", }, |
||||
{IBR_HDR_ECC_FORCED_RS, "rs", "RS mode", }, |
||||
{IBR_HDR_ECC_DISABLED, "disabled", "ECC Disabled", }, |
||||
{-1, "", "", }, |
||||
}; |
||||
|
||||
static struct kwb_header kwbimage_header; |
||||
static int datacmd_cnt = 0; |
||||
static char * fname = "Unknown"; |
||||
static int lineno = -1; |
||||
|
||||
/*
|
||||
* Report Error if xflag is set in addition to default |
||||
*/ |
||||
static int kwbimage_check_params (struct mkimage_params *params) |
||||
{ |
||||
if (!strlen (params->imagename)) { |
||||
printf ("Error:%s - Configuration file not specified, " |
||||
"it is needed for kwbimage generation\n", |
||||
params->cmdname); |
||||
return CFG_INVALID; |
||||
} |
||||
return ((params->dflag && (params->fflag || params->lflag)) || |
||||
(params->fflag && (params->dflag || params->lflag)) || |
||||
(params->lflag && (params->dflag || params->fflag)) || |
||||
(params->xflag) || !(strlen (params->imagename))); |
||||
} |
||||
|
||||
static uint32_t check_get_hexval (char *token) |
||||
{ |
||||
uint32_t hexval; |
||||
|
||||
if (!sscanf (token, "%x", &hexval)) { |
||||
printf ("Error:%s[%d] - Invalid hex data(%s)\n", fname, |
||||
lineno, token); |
||||
exit (EXIT_FAILURE); |
||||
} |
||||
return hexval; |
||||
} |
||||
|
||||
/*
|
||||
* Generates 8 bit checksum |
||||
*/ |
||||
static uint8_t kwbimage_checksum8 (void *start, uint32_t len, uint8_t csum) |
||||
{ |
||||
register uint8_t sum = csum; |
||||
volatile uint8_t *p = (volatile uint8_t *)start; |
||||
|
||||
/* check len and return zero checksum if invalid */ |
||||
if (!len) |
||||
return 0; |
||||
|
||||
do { |
||||
sum += *p; |
||||
p++; |
||||
} while (--len); |
||||
return (sum); |
||||
} |
||||
|
||||
/*
|
||||
* Generates 32 bit checksum |
||||
*/ |
||||
static uint32_t kwbimage_checksum32 (uint32_t *start, uint32_t len, uint32_t csum) |
||||
{ |
||||
register uint32_t sum = csum; |
||||
volatile uint32_t *p = start; |
||||
|
||||
/* check len and return zero checksum if invalid */ |
||||
if (!len) |
||||
return 0; |
||||
|
||||
if (len % sizeof(uint32_t)) { |
||||
printf ("Error:%s[%d] - lenght is not in multiple of %d\n", |
||||
__FUNCTION__, len, sizeof(uint32_t)); |
||||
return 0; |
||||
} |
||||
|
||||
do { |
||||
sum += *p; |
||||
p++; |
||||
len -= sizeof(uint32_t); |
||||
} while (len > 0); |
||||
return (sum); |
||||
} |
||||
|
||||
static void kwbimage_check_cfgdata (char *token, enum kwbimage_cmd cmdsw, |
||||
struct kwb_header *kwbhdr) |
||||
{ |
||||
bhr_t *mhdr = &kwbhdr->kwb_hdr; |
||||
extbhr_t *exthdr = &kwbhdr->kwb_exthdr; |
||||
int i; |
||||
|
||||
switch (cmdsw) { |
||||
case CMD_BOOT_FROM: |
||||
i = get_table_entry_id (kwbimage_bootops, |
||||
"Kwbimage boot option", token); |
||||
|
||||
if (i < 0) |
||||
goto INVL_DATA; |
||||
|
||||
mhdr->blockid = i; |
||||
printf ("Preparing kirkwood boot image to boot " |
||||
"from %s\n", token); |
||||
break; |
||||
case CMD_NAND_ECC_MODE: |
||||
i = get_table_entry_id (kwbimage_eccmodes, |
||||
"NAND ecc mode", token); |
||||
|
||||
if (i < 0) |
||||
goto INVL_DATA; |
||||
|
||||
mhdr->nandeccmode = i; |
||||
printf ("Nand ECC mode = %s\n", token); |
||||
break; |
||||
case CMD_NAND_PAGE_SIZE: |
||||
mhdr->nandpagesize = |
||||
(uint16_t) check_get_hexval (token); |
||||
printf ("Nand page size = 0x%x\n", mhdr->nandpagesize); |
||||
break; |
||||
case CMD_SATA_PIO_MODE: |
||||
mhdr->satapiomode = |
||||
(uint8_t) check_get_hexval (token); |
||||
printf ("Sata PIO mode = 0x%x\n", |
||||
mhdr->satapiomode); |
||||
break; |
||||
case CMD_DDR_INIT_DELAY: |
||||
mhdr->ddrinitdelay = |
||||
(uint16_t) check_get_hexval (token); |
||||
printf ("DDR init delay = %d msec\n", mhdr->ddrinitdelay); |
||||
break; |
||||
case CMD_DATA: |
||||
exthdr->rcfg[datacmd_cnt].raddr = |
||||
check_get_hexval (token); |
||||
|
||||
break; |
||||
case CMD_INVALID: |
||||
goto INVL_DATA; |
||||
default: |
||||
goto INVL_DATA; |
||||
} |
||||
return; |
||||
|
||||
INVL_DATA: |
||||
printf ("Error:%s[%d] - Invalid data\n", fname, lineno); |
||||
exit (EXIT_FAILURE); |
||||
} |
||||
|
||||
/*
|
||||
* this function sets the kwbimage header by- |
||||
* 1. Abstracting input command line arguments data |
||||
* 2. parses the kwbimage configuration file and update extebded header data |
||||
* 3. calculates header, extended header and image checksums |
||||
*/ |
||||
static void kwdimage_set_ext_header (struct kwb_header *kwbhdr, char* name) { |
||||
bhr_t *mhdr = &kwbhdr->kwb_hdr; |
||||
extbhr_t *exthdr = &kwbhdr->kwb_exthdr; |
||||
FILE *fd = NULL; |
||||
int j; |
||||
char *line = NULL; |
||||
char * token, *saveptr1, *saveptr2; |
||||
size_t len = 0; |
||||
enum kwbimage_cmd cmd; |
||||
|
||||
fname = name; |
||||
/* set dram register offset */ |
||||
exthdr->dramregsoffs = (intptr_t)&exthdr->rcfg - (intptr_t)mhdr; |
||||
|
||||
if ((fd = fopen (name, "r")) == 0) { |
||||
printf ("Error:%s - Can't open\n", fname); |
||||
exit (EXIT_FAILURE); |
||||
} |
||||
|
||||
/* Simple kwimage.cfg file parser */ |
||||
lineno=0; |
||||
while ((getline (&line, &len, fd)) > 0) { |
||||
lineno++; |
||||
token = strtok_r (line, "\r\n", &saveptr1); |
||||
/* drop all lines with zero tokens (= empty lines) */ |
||||
if (token == NULL) |
||||
continue; |
||||
|
||||
for (j = 0, cmd = CMD_INVALID, line = token; ; line = NULL) { |
||||
token = strtok_r (line, " \t", &saveptr2); |
||||
if (token == NULL) |
||||
break; |
||||
/* Drop all text starting with '#' as comments */ |
||||
if (token[0] == '#') |
||||
break; |
||||
|
||||
/* Process rest as valid config command line */ |
||||
switch (j) { |
||||
case CFG_COMMAND: |
||||
cmd = get_table_entry_id (kwbimage_cmds, |
||||
"Kwbimage command", token); |
||||
|
||||
if (cmd == CMD_INVALID) |
||||
goto INVL_CMD; |
||||
break; |
||||
|
||||
case CFG_DATA0: |
||||
kwbimage_check_cfgdata (token, cmd, kwbhdr); |
||||
break; |
||||
|
||||
case CFG_DATA1: |
||||
if (cmd != CMD_DATA) |
||||
goto INVL_CMD; |
||||
|
||||
exthdr->rcfg[datacmd_cnt].rdata = |
||||
check_get_hexval (token); |
||||
|
||||
if (datacmd_cnt > KWBIMAGE_MAX_CONFIG ) { |
||||
printf ("Error:%s[%d] - Found more " |
||||
"than max(%zd) allowed " |
||||
"data configurations\n", |
||||
fname, lineno, |
||||
KWBIMAGE_MAX_CONFIG); |
||||
exit (EXIT_FAILURE); |
||||
} else |
||||
datacmd_cnt++; |
||||
break; |
||||
|
||||
default: |
||||
goto INVL_CMD; |
||||
} |
||||
j++; |
||||
} |
||||
} |
||||
if (line) |
||||
free (line); |
||||
|
||||
fclose (fd); |
||||
return; |
||||
|
||||
/*
|
||||
* Invalid Command error reporring |
||||
* |
||||
* command CMD_DATA needs three strings on a line |
||||
* whereas other commands need only two. |
||||
* |
||||
* if more than two/three (as per command type) are observed, |
||||
* then error will be reported |
||||
*/ |
||||
INVL_CMD: |
||||
printf ("Error:%s[%d] - Invalid command\n", fname, lineno); |
||||
exit (EXIT_FAILURE); |
||||
} |
||||
|
||||
static void kwbimage_set_header (void *ptr, struct stat *sbuf, int ifd, |
||||
struct mkimage_params *params) |
||||
{ |
||||
struct kwb_header *hdr = (struct kwb_header *)ptr; |
||||
bhr_t *mhdr = &hdr->kwb_hdr; |
||||
extbhr_t *exthdr = &hdr->kwb_exthdr; |
||||
uint32_t checksum; |
||||
int size; |
||||
|
||||
/* Build and add image checksum header */ |
||||
checksum = kwbimage_checksum32 ((uint32_t *)ptr, sbuf->st_size, 0); |
||||
|
||||
size = write (ifd, &checksum, sizeof(uint32_t)); |
||||
if (size != sizeof(uint32_t)) { |
||||
printf ("Error:%s - Checksum write %d bytes %s\n", |
||||
params->cmdname, size, params->imagefile); |
||||
exit (EXIT_FAILURE); |
||||
} |
||||
|
||||
sbuf->st_size += sizeof(uint32_t); |
||||
|
||||
mhdr->blocksize = sbuf->st_size - sizeof(struct kwb_header); |
||||
mhdr->srcaddr = sizeof(struct kwb_header); |
||||
mhdr->destaddr= params->addr; |
||||
mhdr->execaddr =params->ep; |
||||
mhdr->ext = 0x1; /* header extension appended */ |
||||
|
||||
kwdimage_set_ext_header (hdr, params->imagename); |
||||
/* calculate checksums */ |
||||
mhdr->checkSum = kwbimage_checksum8 ((void *)mhdr, sizeof(bhr_t), 0); |
||||
exthdr->checkSum = kwbimage_checksum8 ((void *)exthdr, |
||||
sizeof(extbhr_t), 0); |
||||
} |
||||
|
||||
static int kwbimage_verify_header (unsigned char *ptr, int image_size, |
||||
struct mkimage_params *params) |
||||
{ |
||||
struct kwb_header *hdr = (struct kwb_header *)ptr; |
||||
bhr_t *mhdr = &hdr->kwb_hdr; |
||||
extbhr_t *exthdr = &hdr->kwb_exthdr; |
||||
uint8_t calc_hdrcsum; |
||||
uint8_t calc_exthdrcsum; |
||||
|
||||
calc_hdrcsum = kwbimage_checksum8 ((void *)mhdr, |
||||
sizeof(bhr_t) - sizeof(uint8_t), 0); |
||||
if (calc_hdrcsum != mhdr->checkSum) |
||||
return -FDT_ERR_BADSTRUCTURE; /* mhdr csum not matched */ |
||||
|
||||
calc_exthdrcsum = kwbimage_checksum8 ((void *)exthdr, |
||||
sizeof(extbhr_t) - sizeof(uint8_t), 0); |
||||
if (calc_hdrcsum != mhdr->checkSum) |
||||
return -FDT_ERR_BADSTRUCTURE; /* exthdr csum not matched */ |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
static void kwbimage_print_header (const void *ptr) |
||||
{ |
||||
struct kwb_header *hdr = (struct kwb_header *) ptr; |
||||
bhr_t *mhdr = &hdr->kwb_hdr; |
||||
char *name = get_table_entry_name (kwbimage_bootops, |
||||
"Kwbimage boot option", |
||||
(int) mhdr->blockid); |
||||
|
||||
printf ("Image Type: Kirkwood Boot from %s Image\n", name); |
||||
printf ("Data Size: "); |
||||
genimg_print_size (mhdr->blocksize - sizeof(uint32_t)); |
||||
printf ("Load Address: %08x\n", mhdr->destaddr); |
||||
printf ("Entry Point: %08x\n", mhdr->execaddr); |
||||
} |
||||
|
||||
static int kwbimage_check_image_types (uint8_t type) |
||||
{ |
||||
if (type == IH_TYPE_KWBIMAGE) |
||||
return EXIT_SUCCESS; |
||||
else |
||||
return EXIT_FAILURE; |
||||
} |
||||
|
||||
/*
|
||||
* kwbimage type parameters definition |
||||
*/ |
||||
static struct image_type_params kwbimage_params = { |
||||
.name = "Kirkwood Boot Image support", |
||||
.header_size = sizeof(struct kwb_header), |
||||
.hdr = (void*)&kwbimage_header, |
||||
.check_image_type = kwbimage_check_image_types, |
||||
.verify_header = kwbimage_verify_header, |
||||
.print_header = kwbimage_print_header, |
||||
.set_header = kwbimage_set_header, |
||||
.check_params = kwbimage_check_params, |
||||
}; |
||||
|
||||
void init_kwb_image_type (void) |
||||
{ |
||||
mkimage_register (&kwbimage_params); |
||||
} |
@ -0,0 +1,106 @@ |
||||
/*
|
||||
* (C) Copyright 2008 |
||||
* Marvell Semiconductor <www.marvell.com> |
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#ifndef _KWBIMAGE_H_ |
||||
#define _KWBIMAGE_H_ |
||||
|
||||
#include <stdint.h> |
||||
|
||||
#define KWBIMAGE_MAX_CONFIG ((0x1dc - 0x20)/sizeof(struct reg_config)) |
||||
#define MAX_TEMPBUF_LEN 32 |
||||
|
||||
/* NAND ECC Mode */ |
||||
#define IBR_HDR_ECC_DEFAULT 0x00 |
||||
#define IBR_HDR_ECC_FORCED_HAMMING 0x01 |
||||
#define IBR_HDR_ECC_FORCED_RS 0x02 |
||||
#define IBR_HDR_ECC_DISABLED 0x03 |
||||
|
||||
/* Boot Type - block ID */ |
||||
#define IBR_HDR_I2C_ID 0x4D |
||||
#define IBR_HDR_SPI_ID 0x5A |
||||
#define IBR_HDR_NAND_ID 0x8B |
||||
#define IBR_HDR_SATA_ID 0x78 |
||||
#define IBR_HDR_PEX_ID 0x9C |
||||
#define IBR_HDR_UART_ID 0x69 |
||||
#define IBR_DEF_ATTRIB 0x00 |
||||
|
||||
enum kwbimage_cmd { |
||||
CMD_INVALID, |
||||
CMD_BOOT_FROM, |
||||
CMD_NAND_ECC_MODE, |
||||
CMD_NAND_PAGE_SIZE, |
||||
CMD_SATA_PIO_MODE, |
||||
CMD_DDR_INIT_DELAY, |
||||
CMD_DATA |
||||
}; |
||||
|
||||
enum kwbimage_cmd_types { |
||||
CFG_INVALID = -1, |
||||
CFG_COMMAND, |
||||
CFG_DATA0, |
||||
CFG_DATA1 |
||||
}; |
||||
|
||||
/* typedefs */ |
||||
typedef struct bhr_t { |
||||
uint8_t blockid; /*0 */ |
||||
uint8_t nandeccmode; /*1 */ |
||||
uint16_t nandpagesize; /*2-3 */ |
||||
uint32_t blocksize; /*4-7 */ |
||||
uint32_t rsvd1; /*8-11 */ |
||||
uint32_t srcaddr; /*12-15 */ |
||||
uint32_t destaddr; /*16-19 */ |
||||
uint32_t execaddr; /*20-23 */ |
||||
uint8_t satapiomode; /*24 */ |
||||
uint8_t rsvd3; /*25 */ |
||||
uint16_t ddrinitdelay; /*26-27 */ |
||||
uint16_t rsvd2; /*28-29 */ |
||||
uint8_t ext; /*30 */ |
||||
uint8_t checkSum; /*31 */ |
||||
} bhr_t, *pbhr_t; |
||||
|
||||
struct reg_config { |
||||
uint32_t raddr; |
||||
uint32_t rdata; |
||||
}; |
||||
|
||||
typedef struct extbhr_t { |
||||
uint32_t dramregsoffs; |
||||
uint8_t rsrvd1[0x20 - sizeof(uint32_t)]; |
||||
struct reg_config rcfg[KWBIMAGE_MAX_CONFIG]; |
||||
uint8_t rsrvd2[7]; |
||||
uint8_t checkSum; |
||||
} extbhr_t, *pextbhr_t; |
||||
|
||||
struct kwb_header { |
||||
bhr_t kwb_hdr; |
||||
extbhr_t kwb_exthdr; |
||||
}; |
||||
|
||||
/*
|
||||
* functions |
||||
*/ |
||||
void init_kwb_image_type (void); |
||||
|
||||
#endif /* _KWBIMAGE_H_ */ |
Loading…
Reference in new issue