ARM: uniphier: enable MTD partition and UBI

Enable "mtdparts" and "ubi" commands for uniphier_v8_defconfig to
use UBI on NAND devices.

Enable only "mtdparts" for uniphier_{v7,ld4_sld8}_defconfig because
enabling UBI would increase 170KB, which would be memory footprint
problem.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

configs/uniphier_ld4_sld8_defconfig

@@ -31,6 +31,9 @@ CONFIG_CMD_TIME=y
 # CONFIG_CMD_MISC is not set
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_NET_RANDOM_ETHADDR=y
@@ -39,7 +42,7 @@ CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_MMC_UNIPHIER=y
-CONFIG_MTD_DEVICE=y
+CONFIG_MTD_PARTITIONS=y
 CONFIG_NAND=y
 CONFIG_NAND_DENALI_DT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
@@ -53,3 +56,4 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_PANIC_HANG=y
+CONFIG_FDT_FIXUP_PARTITIONS=y

configs/uniphier_v7_defconfig

@@ -30,6 +30,9 @@ CONFIG_CMD_TIME=y
 # CONFIG_CMD_MISC is not set
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_NET_RANDOM_ETHADDR=y
@@ -38,7 +41,7 @@ CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_MMC_UNIPHIER=y
-CONFIG_MTD_DEVICE=y
+CONFIG_MTD_PARTITIONS=y
 CONFIG_NAND=y
 CONFIG_NAND_DENALI_DT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
@@ -54,3 +57,4 @@ CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_UNIPHIER=y
 CONFIG_USB_STORAGE=y
 CONFIG_PANIC_HANG=y
+CONFIG_FDT_FIXUP_PARTITIONS=y

configs/uniphier_v8_defconfig

@@ -26,6 +26,9 @@ CONFIG_CMD_TIME=y
 # CONFIG_CMD_MISC is not set
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
+CONFIG_CMD_UBI=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_GPIO_UNIPHIER=y
 CONFIG_MISC=y
@@ -36,7 +39,6 @@ CONFIG_MMC_UNIPHIER=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_MTD_DEVICE=y
 CONFIG_NAND=y
 CONFIG_NAND_DENALI_DT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
@@ -54,3 +56,4 @@ CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_UNIPHIER=y
 CONFIG_USB_STORAGE=y
 CONFIG_PANIC_HANG=y
+CONFIG_FDT_FIXUP_PARTITIONS=y