Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arm: imx6: Switch DDR3 calibration to wait_for_bit()

Browse Source 
Switch the DDR3 calibration from ad-hoc implementation of wait_for_bit()
to generic implementation of wait_for_bit().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
master
Marek Vasut 9 years ago committed by Stefano Babic
parent 08cb448315
commit b10d93ee9e
1 changed files with 12 additions and 32 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 44
      arch/arm/cpu/armv7/mx6/ddr.c

44
arch/arm/cpu/armv7/mx6/ddr.c
Unescape View File

@ -12,40 +12,20 @@
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/types.h>
#include <wait_bit.h>
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
static int wait_for_bit(void *reg, const uint32_t mask, bool set)
{
unsigned int timeout = 1000;
u32 val;
while (--timeout) {
val = readl(reg);
if (!set)
val = ~val;
if ((val & mask) == mask)
return 0;
udelay(1);
}
printf("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
__func__, reg, mask, set);
hang(); /* DRAM couldn't be calibrated, game over :-( */
}
static void reset_read_data_fifos(void)
{
struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
/* Reset data FIFOs twice. */
setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
}
static void precharge_all(const bool cs0_enable, const bool cs1_enable)
@ -60,12 +40,12 @@ static void precharge_all(const bool cs0_enable, const bool cs1_enable)
*/
if (cs0_enable) { /* CS0 */
writel(0x04008050, &mmdc0->mdscr);
wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
}
if (cs1_enable) { /* CS1 */
writel(0x04008058, &mmdc0->mdscr);
wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
}
}
@ -164,7 +144,7 @@ int mmdc_do_write_level_calibration(void)
* 7. Upon completion of this process the MMDC de-asserts
* the MPWLGCR[HW_WL_EN]
*/
wait_for_bit(&mmdc0->mpwlgcr, 1 << 0, 0);
wait_for_bit("MMDC", &mmdc0->mpwlgcr, 1 << 0, 0, 100, 0);
/*
* 8. check for any errors: check both PHYs for x64 configuration,
@ -289,7 +269,7 @@ int mmdc_do_dqs_calibration(void)
writel(0x00008028, &mmdc0->mdscr);
/* poll to make sure the con_ack bit was asserted */
wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
/*
* Check MDMISC register CALIB_PER_CS to see which CS calibration
@ -327,7 +307,7 @@ int mmdc_do_dqs_calibration(void)
* this bit until it clears to indicate completion of the write access.
*/
setbits_le32(&mmdc0->mpswdar0, 1);
wait_for_bit(&mmdc0->mpswdar0, 1 << 0, 0);
wait_for_bit("MMDC", &mmdc0->mpswdar0, 1 << 0, 0, 100, 0);
/* Set the RD_DL_ABS# bits to their default values
* (will be calibrated later in the read delay-line calibration).
@ -372,7 +352,7 @@ int mmdc_do_dqs_calibration(void)
setbits_le32(&mmdc0->mpdgctrl0, 5 << 28);
/* Poll for completion. MPDGCTRL0[HW_DG_EN] should be 0 */
wait_for_bit(&mmdc0->mpdgctrl0, 1 << 28, 0);
wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 28, 0, 100, 0);
/*
* Check to see if any errors were encountered during calibration
@ -431,7 +411,7 @@ int mmdc_do_dqs_calibration(void)
* setting MPRDDLHWCTL[HW_RD_DL_EN] = 0. Also, ensure that
* no error bits were set.
*/
wait_for_bit(&mmdc0->mprddlhwctl, 1 << 4, 0);
wait_for_bit("MMDC", &mmdc0->mprddlhwctl, 1 << 4, 0, 100, 0);
/* check both PHYs for x64 configuration, if x32, check only PHY0 */
if (readl(&mmdc0->mprddlhwctl) & 0x0000000f)
@ -484,7 +464,7 @@ int mmdc_do_dqs_calibration(void)
* by setting MPWRDLHWCTL[HW_WR_DL_EN] = 0.
* Also, ensure that no error bits were set.
*/
wait_for_bit(&mmdc0->mpwrdlhwctl, 1 << 4, 0);
wait_for_bit("MMDC", &mmdc0->mpwrdlhwctl, 1 << 4, 0, 100, 0);
/* Check both PHYs for x64 configuration, if x32, check only PHY0 */
if (readl(&mmdc0->mpwrdlhwctl) & 0x0000000f)
@ -532,7 +512,7 @@ int mmdc_do_dqs_calibration(void)
writel(0x0, &mmdc0->mdscr); /* CS0 */
/* Poll to make sure the con_ack bit is clear */
wait_for_bit(&mmdc0->mdscr, 1 << 14, 0);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 0, 100, 0);
/*
* Print out the registers that were updated as a result

Write Preview
Loading…
Cancel
Save