powerpc/85xx: update the work-around for P4080 erratum SERDES-9

The documented work-around for P4080 erratum SERDES-9 has been updated.
It is now compatible with the work-around for erratum A-4580.

This requires adding a few bitfield macros for the BnTTLCRy0 register.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c

@@ -714,9 +714,13 @@ void fsl_serdes_init(void)
 
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
 		/*
-		 * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for
-		 * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or
-		 * AURORA before the device is initialized.
+		 * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1
+		 * for each of the SerDes lanes selected as SGMII, XAUI, SRIO,
+		 * or AURORA before the device is initialized.
+		 *
+		 * Note that this part of the SERDES-9 work-around is
+		 * redundant if the work-around for A-4580 has already been
+		 * applied via PBI.
 		 */
 		switch (lane_prtcl) {
 		case SGMII_FM1_DTSEC1:
@@ -733,10 +737,12 @@ void fsl_serdes_init(void)
 		case SRIO1:
 		case SRIO2:
 		case AURORA:
-			clrsetbits_be32(&srds_regs->lane[idx].ttlcr0,
-					SRDS_TTLCR0_FLT_SEL_MASK,
-					SRDS_TTLCR0_FLT_SEL_750PPM |
-					SRDS_TTLCR0_PM_DIS);
+			out_be32(&srds_regs->lane[idx].ttlcr0,
+				 SRDS_TTLCR0_FLT_SEL_KFR_26 |
+				 SRDS_TTLCR0_FLT_SEL_KPH_28 |
+				 SRDS_TTLCR0_FLT_SEL_750PPM |
+				 SRDS_TTLCR0_FREQOVD_EN);
+			break;
 		default:
 			break;
 		}

arch/powerpc/include/asm/immap_85xx.h

@@ -2637,8 +2637,11 @@ typedef struct serdes_corenet {
 		u32	res3;
 		u32	ttlcr0;	/* Transition Tracking Loop Ctrl 0 */
 #define SRDS_TTLCR0_FLT_SEL_MASK	0x3f000000
+#define SRDS_TTLCR0_FLT_SEL_KFR_26	0x10000000
+#define SRDS_TTLCR0_FLT_SEL_KPH_28	0x08000000
 #define SRDS_TTLCR0_FLT_SEL_750PPM	0x03000000
 #define SRDS_TTLCR0_PM_DIS		0x00004000
+#define SRDS_TTLCR0_FREQOVD_EN		0x00000001
 		u32	res4[7];
 	} lane[24];
 	u32 res6[384];