From bce4d18c9d96ffb16f2c9bb4f0549543c5c7e240 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 8 Sep 2016 15:06:45 +0200 Subject: [PATCH] dm: Add support for scsi/sata based devices All sata based drivers are bind and corresponding block device is created. Based on this find_scsi_device() is able to get back block device based on scsi_curr_dev pointer. intr_scsi() is commented now but it can be replaced by calling find_scsi_device() and scsi_scan(). scsi_dev_desc[] is commented out but common/scsi.c heavily depends on it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol is reassigned to a block description allocated by uclass. There is only one block description by device now but it doesn't need to be correct when more devices are present. scsi_bind() ensures corresponding block device creation. uclass post_probe (scsi_post_probe()) is doing low level init. SCSI/SATA DM based drivers requires to have 64bit base address as the first entry in platform data structure to setup mmio_base. Signed-off-by: Michal Simek Reviewed-by: Simon Glass Series-changes: 2 - Use CONFIG_DM_SCSI instead of mix of DM_SCSI and DM_SATA Ceva sata has never used sata commands that's why keep it in SCSI part only. - Separate scsi_scan() for DM_SCSI and do not change cmd/scsi.c - Extend platdata Series-changes: 3 - Fix scsi_scan return path - Fix header location uclass-internal.h - Add scsi_max_devs under !DM_SCSI - Add new header device-internal because of device_probe() - Redesign block device creation algorithm - Use device_unbind in error path - Create block device with id and lun numbers (lun was there in v2) - Cleanup dev_num initialization in block device description with fixing parameters in blk_create_devicef - Create new Kconfig menu for SATA/SCSI drivers - Extend description for DM_SCSI - Fix Kconfig dependencies - Fix kernel doc format in scsi_platdata - Fix ahci_init_one - vendor variable Series-changes: 4 - Fix Kconfig entry - Remove SPL ifdef around SCSI uclass - Clean ahci_print_info() ifdef logic --- common/board_r.c | 4 +-- common/scsi.c | 76 +++++++++++++++++++++++++++++++++++++++++++++ drivers/block/Kconfig | 13 ++++++++ drivers/block/Makefile | 1 + drivers/block/ahci.c | 30 +++++++++++++----- drivers/block/blk-uclass.c | 2 +- drivers/block/scsi-uclass.c | 27 ++++++++++++++++ include/ahci.h | 2 +- include/dm/uclass-id.h | 1 + include/sata.h | 2 ++ include/scsi.h | 20 +++++++++++- 11 files changed, 165 insertions(+), 13 deletions(-) create mode 100644 drivers/block/scsi-uclass.c diff --git a/common/board_r.c b/common/board_r.c index 5496f45..a373352 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -620,7 +620,7 @@ static int initr_ambapp_print(void) } #endif -#if defined(CONFIG_SCSI) +#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI) static int initr_scsi(void) { puts("SCSI: "); @@ -923,7 +923,7 @@ init_fnc_t init_sequence_r[] = { initr_ambapp_print, #endif #endif -#ifdef CONFIG_SCSI +#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI) INIT_FUNC_WATCHDOG_RESET initr_scsi, #endif diff --git a/common/scsi.c b/common/scsi.c index 04add62..e7efa5a 100644 --- a/common/scsi.c +++ b/common/scsi.c @@ -10,7 +10,10 @@ #include #include #include +#include +#include +#if !defined(CONFIG_DM_SCSI) #ifdef CONFIG_SCSI_DEV_LIST #define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST #else @@ -31,6 +34,7 @@ #endif #define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} #endif +#endif #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; @@ -39,11 +43,13 @@ static ccb tempccb; /* temporary scsi command buffer */ static unsigned char tempbuff[512]; /* temporary data buffer */ +#if !defined(CONFIG_DM_SCSI) static int scsi_max_devs; /* number of highest available scsi device */ static int scsi_curr_dev; /* current device */ static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; +#endif /* almost the maximum amount of the scsi_ext command.. */ #define SCSI_MAX_READ_BLK 0xFFFF @@ -444,6 +450,7 @@ static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc) #endif } +#if !defined(CONFIG_DM_SCSI) /** * scsi_init_dev_desc - initialize all SCSI specific blk_desc properties * @@ -460,6 +467,7 @@ static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum) scsi_init_dev_desc_priv(dev_desc); } +#endif /** * scsi_detect_dev - Detect scsi device @@ -540,6 +548,73 @@ removable: * (re)-scan the scsi bus and reports scsi device info * to the user if mode = 1 */ +#if defined(CONFIG_DM_SCSI) +int scsi_scan(int mode) +{ + unsigned char i, lun; + struct uclass *uc; + struct udevice *dev; /* SCSI controller */ + int ret; + + if (mode == 1) + printf("scanning bus for devices...\n"); + + ret = uclass_get(UCLASS_SCSI, &uc); + if (ret) + return ret; + + uclass_foreach_dev(dev, uc) { + struct scsi_platdata *plat; /* scsi controller platdata */ + + /* probe SCSI controller driver */ + ret = device_probe(dev); + if (ret) + return ret; + + /* Get controller platdata */ + plat = dev_get_platdata(dev); + + for (i = 0; i < plat->max_id; i++) { + for (lun = 0; lun < plat->max_lun; lun++) { + struct udevice *bdev; /* block device */ + /* block device description */ + struct blk_desc *bdesc; + char str[10]; + + /* + * Create only one block device and do detection + * to make sure that there won't be a lot of + * block devices created + */ + snprintf(str, sizeof(str), "id%dlun%d", i, lun); + ret = blk_create_devicef(dev, "scsi_blk", + str, IF_TYPE_SCSI, + -1, 0, 0, &bdev); + if (ret) { + debug("Can't create device\n"); + return ret; + } + bdesc = dev_get_uclass_platdata(bdev); + + scsi_init_dev_desc_priv(bdesc); + bdesc->lun = lun; + ret = scsi_detect_dev(i, bdesc); + if (ret) { + device_unbind(bdev); + continue; + } + + if (mode == 1) { + printf(" Device %d: ", 0); + dev_print(bdesc); + } /* if mode */ + } /* next LUN */ + } + } + + return 0; +} +#else int scsi_scan(int mode) { unsigned char i, lun; @@ -576,6 +651,7 @@ int scsi_scan(int mode) #endif return 0; } +#endif #ifdef CONFIG_BLK static const struct blk_ops scsi_blk_ops = { diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index fe5aa07..7b82ba6 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -19,6 +19,15 @@ config AHCI operations at present. The block device interface has not been converted to driver model. +config DM_SCSI + bool "Support SCSI controllers with driver model" + depends on BLK + help + This option enables the SCSI (Small Computer System Interface) uclass + which supports SCSI and SATA HDDs. For every device configuration + (IDs/LUNs) a block device is created with RAW read/write and + filesystem support. + config BLOCK_CACHE bool "Use block device cache" default n @@ -27,3 +36,7 @@ config BLOCK_CACHE This is most useful when accessing filesystems under U-Boot since it will prevent repeated reads from directory structures and other filesystem data structures. + +menu "SATA/SCSI device support" + +endmenu diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 436b79f..a72feec 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -12,6 +12,7 @@ obj-y += blk_legacy.o endif obj-$(CONFIG_AHCI) += ahci-uclass.o +obj-$(CONFIG_DM_SCSI) += scsi-uclass.o obj-$(CONFIG_SCSI_AHCI) += ahci.o obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o obj-$(CONFIG_FSL_SATA) += fsl_sata.o diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 5139989..3fa14a7 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -168,7 +168,7 @@ int ahci_reset(void __iomem *base) static int ahci_host_init(struct ahci_probe_ent *probe_ent) { -#ifndef CONFIG_SCSI_AHCI_PLAT +#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) # ifdef CONFIG_DM_PCI struct udevice *dev = probe_ent->dev; struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); @@ -198,7 +198,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel(cap_save, mmio + HOST_CAP); writel_with_flush(0xf, mmio + HOST_PORTS_IMPL); -#ifndef CONFIG_SCSI_AHCI_PLAT +#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) # ifdef CONFIG_DM_PCI if (pplat->vendor == PCI_VENDOR_ID_INTEL) { u16 tmp16; @@ -327,6 +327,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); tmp = readl(mmio + HOST_CTL); debug("HOST_CTL 0x%x\n", tmp); +#if !defined(CONFIG_DM_SCSI) #ifndef CONFIG_SCSI_AHCI_PLAT # ifdef CONFIG_DM_PCI dm_pci_read_config16(dev, PCI_COMMAND, &tmp16); @@ -338,14 +339,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) pci_write_config_word(pdev, PCI_COMMAND, tmp16); # endif #endif +#endif return 0; } static void ahci_print_info(struct ahci_probe_ent *probe_ent) { -#ifndef CONFIG_SCSI_AHCI_PLAT -# ifdef CONFIG_DM_PCI +#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) +# if defined(CONFIG_DM_PCI) struct udevice *dev = probe_ent->dev; # else pci_dev_t pdev = probe_ent->dev; @@ -372,7 +374,7 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) else speed_s = "?"; -#ifdef CONFIG_SCSI_AHCI_PLAT +#if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI) scc_s = "SATA"; #else # ifdef CONFIG_DM_PCI @@ -424,13 +426,15 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) } #ifndef CONFIG_SCSI_AHCI_PLAT -# ifdef CONFIG_DM_PCI +# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI) static int ahci_init_one(struct udevice *dev) # else static int ahci_init_one(pci_dev_t dev) # endif { +#if !defined(CONFIG_DM_SCSI) u16 vendor; +#endif int rc; probe_ent = malloc(sizeof(struct ahci_probe_ent)); @@ -450,6 +454,7 @@ static int ahci_init_one(pci_dev_t dev) probe_ent->pio_mask = 0x1f; probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ +#if !defined(CONFIG_DM_SCSI) #ifdef CONFIG_DM_PCI probe_ent->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5, PCI_REGION_MEM); @@ -473,6 +478,10 @@ static int ahci_init_one(pci_dev_t dev) if (vendor == 0x197b) pci_write_config_byte(dev, 0x41, 0xa1); #endif +#else + struct scsi_platdata *plat = dev_get_platdata(dev); + probe_ent->mmio_base = (void *)plat->base; +#endif debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base); /* initialize adapter */ @@ -954,14 +963,17 @@ int scsi_exec(ccb *pccb) } - +#if defined(CONFIG_DM_SCSI) +void scsi_low_level_init(int busdevfunc, struct udevice *dev) +#else void scsi_low_level_init(int busdevfunc) +#endif { int i; u32 linkmap; #ifndef CONFIG_SCSI_AHCI_PLAT -# ifdef CONFIG_DM_PCI +# if defined(CONFIG_DM_PCI) struct udevice *dev; int ret; @@ -969,6 +981,8 @@ void scsi_low_level_init(int busdevfunc) if (ret) return; ahci_init_one(dev); +# elif defined(CONFIG_DM_SCSI) + ahci_init_one(dev); # else ahci_init_one(busdevfunc); # endif diff --git a/drivers/block/blk-uclass.c b/drivers/block/blk-uclass.c index 2e041c2..38cb938 100644 --- a/drivers/block/blk-uclass.c +++ b/drivers/block/blk-uclass.c @@ -26,7 +26,7 @@ static const char *if_typename_str[IF_TYPE_COUNT] = { static enum uclass_id if_type_uclass_id[IF_TYPE_COUNT] = { [IF_TYPE_IDE] = UCLASS_INVALID, - [IF_TYPE_SCSI] = UCLASS_INVALID, + [IF_TYPE_SCSI] = UCLASS_SCSI, [IF_TYPE_ATAPI] = UCLASS_INVALID, [IF_TYPE_USB] = UCLASS_MASS_STORAGE, [IF_TYPE_DOC] = UCLASS_INVALID, diff --git a/drivers/block/scsi-uclass.c b/drivers/block/scsi-uclass.c new file mode 100644 index 0000000..05da6cd --- /dev/null +++ b/drivers/block/scsi-uclass.c @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass + * Copyright (c) 2016 Xilinx, Inc + * Written by Michal Simek + * + * Based on ahci-uclass.c + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +static int scsi_post_probe(struct udevice *dev) +{ + debug("%s: device %p\n", __func__, dev); + scsi_low_level_init(0, dev); + return 0; +} + +UCLASS_DRIVER(scsi) = { + .id = UCLASS_SCSI, + .name = "scsi", + .post_probe = scsi_post_probe, +}; diff --git a/include/ahci.h b/include/ahci.h index a956c6f..4876b41 100644 --- a/include/ahci.h +++ b/include/ahci.h @@ -145,7 +145,7 @@ struct ahci_ioports { }; struct ahci_probe_ent { -#ifdef CONFIG_DM_PCI +#if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI) struct udevice *dev; #else pci_dev_t dev; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index eb78c4d..8c92d0b 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -66,6 +66,7 @@ enum uclass_id { UCLASS_REMOTEPROC, /* Remote Processor device */ UCLASS_RESET, /* Reset controller device */ UCLASS_RTC, /* Real time clock device */ + UCLASS_SCSI, /* SCSI device */ UCLASS_SERIAL, /* Serial UART */ UCLASS_SPI, /* SPI bus */ UCLASS_SPMI, /* System Power Management Interface bus */ diff --git a/include/sata.h b/include/sata.h index b35359a..d18cc9a 100644 --- a/include/sata.h +++ b/include/sata.h @@ -2,6 +2,7 @@ #define __SATA_H__ #include +#if !defined(CONFIG_DM_SCSI) int init_sata(int dev); int reset_sata(int dev); int scan_sata(int dev); @@ -15,5 +16,6 @@ int __sata_stop(void); int sata_port_status(int dev, int port); extern struct blk_desc sata_dev_desc[]; +#endif #endif diff --git a/include/scsi.h b/include/scsi.h index c879678..190dacd 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -166,8 +166,11 @@ typedef struct SCSI_cmd_block{ void scsi_print_error(ccb *pccb); int scsi_exec(ccb *pccb); void scsi_bus_reset(void); +#if !defined(CONFIG_DM_SCSI) void scsi_low_level_init(int busdevfunc); - +#else +void scsi_low_level_init(int busdevfunc, struct udevice *dev); +#endif /*************************************************************************** * functions residing inside cmd_scsi.c @@ -175,6 +178,21 @@ void scsi_low_level_init(int busdevfunc); void scsi_init(void); int scsi_scan(int mode); +#if defined(CONFIG_DM_SCSI) +/** + * struct scsi_platdata - stores information about SCSI controller + * + * @base: Controller base address + * @max_lun: Maximum number of logical units + * @max_id: Maximum number of target ids + */ +struct scsi_platdata { + unsigned long base; + unsigned long max_lun; + unsigned long max_id; +}; +#endif + #define SCSI_IDENTIFY 0xC0 /* not used */ /* Hardware errors */