The twl4030 provides a PHY device for connecting a link device, like musb, to physical connection. This change adds the twl4030 usb registers and functions for initializing the PHY as required by omap3. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>master
parent
988365a204
commit
bffbb2a86d
@ -0,0 +1,44 @@ |
||||
#
|
||||
# Copyright (c) 2009 Wind River Systems, Inc.
|
||||
# Tom Rix <Tom.Rix@windriver.com>
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk |
||||
|
||||
LIB := $(obj)libusb_phy.a
|
||||
|
||||
COBJS-$(CONFIG_TWL4030_USB) += twl4030.o
|
||||
COBJS-y := twl4030.o
|
||||
|
||||
COBJS := $(COBJS-y)
|
||||
SRCS := $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
||||
all: $(LIB) |
||||
|
||||
$(LIB): $(obj).depend $(OBJS) |
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk |
||||
|
||||
sinclude $(obj).depend |
||||
|
||||
#########################################################################
|
@ -0,0 +1,189 @@ |
||||
/*
|
||||
* Copyright (c) 2009 Wind River Systems, Inc. |
||||
* Tom Rix <Tom.Rix@windriver.com> |
||||
* |
||||
* This is file is based on |
||||
* repository git.gitorious.org/u-boot-omap3/mainline.git, |
||||
* branch omap3-dev-usb, file drivers/usb/gadget/twl4030_usb.c |
||||
* |
||||
* This is the unique part of its copyright : |
||||
* |
||||
* ------------------------------------------------------------------------ |
||||
* |
||||
* * (C) Copyright 2009 Atin Malaviya (atin.malaviya@gmail.com) |
||||
* |
||||
* Based on: twl4030_usb.c in linux 2.6 (drivers/i2c/chips/twl4030_usb.c) |
||||
* Copyright (C) 2004-2007 Texas Instruments |
||||
* Copyright (C) 2008 Nokia Corporation |
||||
* Contact: Felipe Balbi <felipe.balbi@nokia.com> |
||||
* |
||||
* Author: Atin Malaviya (atin.malaviya@gmail.com) |
||||
* |
||||
* ------------------------------------------------------------------------ |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#include <twl4030.h> |
||||
|
||||
/* Defines for bits in registers */ |
||||
#define OPMODE_MASK (3 << 3) |
||||
#define XCVRSELECT_MASK (3 << 0) |
||||
#define CARKITMODE (1 << 2) |
||||
#define OTG_ENAB (1 << 5) |
||||
#define PHYPWD (1 << 0) |
||||
#define CLOCKGATING_EN (1 << 2) |
||||
#define CLK32K_EN (1 << 1) |
||||
#define REQ_PHY_DPLL_CLK (1 << 0) |
||||
#define PHY_DPLL_CLK (1 << 0) |
||||
|
||||
static int twl4030_usb_write(u8 address, u8 data) |
||||
{ |
||||
int ret; |
||||
|
||||
ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, data, address); |
||||
if (ret != 0) |
||||
printf("TWL4030:USB:Write[0x%x] Error %d\n", address, ret); |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
static int twl4030_usb_read(u8 address) |
||||
{ |
||||
u8 data; |
||||
int ret; |
||||
|
||||
ret = twl4030_i2c_read_u8(TWL4030_CHIP_USB, &data, address); |
||||
if (ret == 0) |
||||
ret = data; |
||||
else |
||||
printf("TWL4030:USB:Read[0x%x] Error %d\n", address, ret); |
||||
|
||||
return ret; |
||||
} |
||||
|
||||
static void twl4030_usb_ldo_init(void) |
||||
{ |
||||
/* Enable writing to power configuration registers */ |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0xC0, |
||||
TWL4030_PM_MASTER_PROTECT_KEY); |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x0C, |
||||
TWL4030_PM_MASTER_PROTECT_KEY); |
||||
|
||||
/* put VUSB3V1 LDO in active state */ |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, |
||||
TWL4030_PM_RECEIVER_VUSB_DEDICATED2); |
||||
|
||||
/* input to VUSB3V1 LDO is from VBAT, not VBUS */ |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x14, |
||||
TWL4030_PM_RECEIVER_VUSB_DEDICATED1); |
||||
|
||||
/* turn on 3.1V regulator */ |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20, |
||||
TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP); |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, |
||||
TWL4030_PM_RECEIVER_VUSB3V1_TYPE); |
||||
|
||||
/* turn on 1.5V regulator */ |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20, |
||||
TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP); |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, |
||||
TWL4030_PM_RECEIVER_VUSB1V5_TYPE); |
||||
|
||||
/* turn on 1.8V regulator */ |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20, |
||||
TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP); |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, |
||||
TWL4030_PM_RECEIVER_VUSB1V8_TYPE); |
||||
|
||||
/* disable access to power configuration registers */ |
||||
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x00, |
||||
TWL4030_PM_MASTER_PROTECT_KEY); |
||||
} |
||||
|
||||
static void twl4030_phy_power(void) |
||||
{ |
||||
u8 pwr, clk; |
||||
|
||||
/* Power the PHY */ |
||||
pwr = twl4030_usb_read(TWL4030_USB_PHY_PWR_CTRL); |
||||
pwr &= ~PHYPWD; |
||||
twl4030_usb_write(TWL4030_USB_PHY_PWR_CTRL, pwr); |
||||
/* Enable clocks */ |
||||
clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL); |
||||
clk |= CLOCKGATING_EN | CLK32K_EN; |
||||
twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk); |
||||
} |
||||
|
||||
/*
|
||||
* Initiaze the ULPI interface |
||||
* ULPI : Universal Transceiver Macrocell Low Pin Interface |
||||
* An interface between the USB link controller like musb and the |
||||
* the PHY or transceiver that drives the actual bus. |
||||
*/ |
||||
int twl4030_usb_ulpi_init(void) |
||||
{ |
||||
long timeout = 1000 * 1000; /* 1 sec */; |
||||
u8 clk, sts, pwr; |
||||
|
||||
/* twl4030 ldo init */ |
||||
twl4030_usb_ldo_init(); |
||||
|
||||
/* Enable the twl4030 phy */ |
||||
twl4030_phy_power(); |
||||
|
||||
/* Enable DPLL to access PHY registers over I2C */ |
||||
clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL); |
||||
clk |= REQ_PHY_DPLL_CLK; |
||||
twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk); |
||||
|
||||
/* Check if the PHY DPLL is locked */ |
||||
sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS); |
||||
while (!(sts & PHY_DPLL_CLK) && 0 < timeout) { |
||||
udelay(10); |
||||
sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS); |
||||
timeout -= 10; |
||||
} |
||||
|
||||
/* Final check */ |
||||
sts = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL_STS); |
||||
if (!(sts & PHY_DPLL_CLK)) { |
||||
printf("Error:TWL4030:USB Timeout setting PHY DPLL clock\n"); |
||||
return -1; |
||||
} |
||||
|
||||
/*
|
||||
* There are two circuit blocks attached to the PHY, |
||||
* Carkit and USB OTG. Disable Carkit and enable USB OTG |
||||
*/ |
||||
twl4030_usb_write(TWL4030_USB_IFC_CTRL_CLR, CARKITMODE); |
||||
pwr = twl4030_usb_read(TWL4030_USB_POWER_CTRL); |
||||
pwr |= OTG_ENAB; |
||||
twl4030_usb_write(TWL4030_USB_POWER_CTRL_SET, pwr); |
||||
|
||||
/* Clear the opmode bits to ensure normal encode */ |
||||
twl4030_usb_write(TWL4030_USB_FUNC_CTRL_CLR, OPMODE_MASK); |
||||
|
||||
/* Clear the xcvrselect bits to enable the high speed transeiver */ |
||||
twl4030_usb_write(TWL4030_USB_FUNC_CTRL_CLR, XCVRSELECT_MASK); |
||||
|
||||
/* Let ULPI control the DPLL clock */ |
||||
clk = twl4030_usb_read(TWL4030_USB_PHY_CLK_CTRL); |
||||
clk &= ~REQ_PHY_DPLL_CLK; |
||||
twl4030_usb_write(TWL4030_USB_PHY_CLK_CTRL, clk); |
||||
|
||||
return 0; |
||||
} |
Loading…
Reference in new issue