Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'

12 years ago · c0e5dd88c4
parent f6723794fd c12f941bec
commit c0e5dd88c4
28 changed files with 97 additions and 12 deletions
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@ -233,6 +233,8 @@ typedef struct at91_pmc {
 #endif
 #define		AT91_PMC_USBS_USB_PLLA		(0x0)		/* USB Clock Input is PLLA */
 #define		AT91_PMC_USBS_USB_UPLL		(0x1)		/* USB Clock Input is UPLL */
+#define		AT91_PMC_USBS_USB_PLLB		(0x1)		/* USB Clock Input is PLLB, AT91SAM9N12 only */
+#define		AT91_PMC_USB_DIV_2		(0x1 <<  8)	/* USB Clock divided by 2 */
 #define		AT91_PMC_USBDIV_8		(0x7 <<  8)	/* USB Clock divided by 8 */
 #define		AT91_PMC_USBDIV_10		(0x9 <<  8)	/* USB Clock divided by 10 */

--- a/arch/arm/include/asm/arch-at91/at91_rstc.h
+++ b/arch/arm/include/asm/arch-at91/at91_rstc.h
@ -38,4 +38,11 @@ typedef struct at91_rstc {

 #define AT91_RSTC_SR_NRSTL	0x00010000

+#define AT91_RSTC_RSTTYP		(7 << 8)	/* Reset Type */
+#define AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define AT91_RSTC_RSTTYP_WAKEUP	(1 << 8)
+#define AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define AT91_RSTC_RSTTYP_USER		(4 << 8)
+
 #endif
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@ -199,6 +199,13 @@ void at91sam9n12ek_ks8851_hw_init(void)
 }
 #endif

+#ifdef CONFIG_USB_ATMEL
+void at91sam9n12ek_usb_hw_init(void)
+{
+	at91_set_pio_output(AT91_PIO_PORTB, 7, 0);
+}
+#endif
+
 int board_early_init_f(void)
 {
 	/* Enable clocks for all PIOs */
@ -230,6 +237,10 @@ int board_init(void)
 	at91sam9n12ek_ks8851_hw_init();
 #endif

+#ifdef CONFIG_USB_ATMEL
+	at91sam9n12ek_usb_hw_init();
+#endif
+
 	return 0;
 }

--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@ -621,6 +621,24 @@ static u32 gem_mdc_clk_div(int id, struct macb_device *macb)
 	return config;
 }

+/*
+ * Get the DMA bus width field of the network configuration register that we
+ * should program. We find the width from decoding the design configuration
+ * register to find the maximum supported data bus width.
+ */
+static u32 macb_dbw(struct macb_device *macb)
+{
+	switch (GEM_BFEXT(DBWDEF, gem_readl(macb, DCFG1))) {
+	case 4:
+		return GEM_BF(DBW, GEM_DBW128);
+	case 2:
+		return GEM_BF(DBW, GEM_DBW64);
+	case 1:
+	default:
+		return GEM_BF(DBW, GEM_DBW32);
+	}
+}
+
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
 {
 	struct macb_device *macb;
@ -665,7 +683,7 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
 	 */
 	if (macb_is_gem(macb)) {
 		ncfgr = gem_mdc_clk_div(id, macb);
-		ncfgr |= GEM_BF(DBW, 1);
+		ncfgr |= macb_dbw(macb);
 	} else {
 		ncfgr = macb_mdc_clk_div(id, macb);
 	}
--- a/drivers/net/macb.h
+++ b/drivers/net/macb.h
@ -58,6 +58,9 @@
 #define MACB_WOL				0x00c4
 #define MACB_MID				0x00fc

+/* GEM specific register offsets */
+#define GEM_DCFG1				0x0280
+
 /* Bitfields in NCR */
 #define MACB_LB_OFFSET				0
 #define MACB_LB_SIZE				1
@ -242,6 +245,14 @@
 #define MACB_IDNUM_SIZE				16

 /* Bitfields in DCFG1 */
+#define GEM_DBWDEF_OFFSET			25
+#define GEM_DBWDEF_SIZE				3
+
+/* constants for data bus width */
+#define GEM_DBW32				0
+#define GEM_DBW64				1
+#define GEM_DBW128				2
+
 /* Constants for CLK */
 #define MACB_CLK_DIV8				0
 #define MACB_CLK_DIV16				1
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@ -18,15 +18,15 @@ int usb_cpu_init(void)
 {
 	at91_pmc_t *pmc	= (at91_pmc_t *)ATMEL_BASE_PMC;

-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
-    defined(CONFIG_AT91SAM9261)
+#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
 	/* Enable PLLB */
 	writel(get_pllb_init(), &pmc->pllbr);
 	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
 		;
-#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
-	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
+#ifdef CONFIG_AT91SAM9N12
+	writel(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2, &pmc->usb);
+#endif
+#elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL)
 	/* Enable UPLL */
 	writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
 		&pmc->uckr);
@ -70,14 +70,15 @@ int usb_cpu_stop(void)
 	writel(ATMEL_PMC_UHP, &pmc->scdr);
 #endif

-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
+#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
+#ifdef CONFIG_AT91SAM9N12
+	writel(0, &pmc->usb);
+#endif
 	/* Disable PLLB */
 	writel(0, &pmc->pllbr);
 	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
 		;
-#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
-	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
+#elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL)
 	/* Disable UPLL */
 	writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
 	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@ -112,6 +112,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@ -154,6 +154,7 @@
 * USB Config
 */
 #define CONFIG_USB_ATMEL			1
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW			1
 #define CONFIG_USB_KEYBOARD			1
 #define CONFIG_USB_STORAGE			1
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@ -185,6 +185,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@ -146,6 +146,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@ -279,6 +279,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW		1
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@ -83,6 +83,7 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB

 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
@ -163,6 +164,18 @@
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		0x26e00000

+/* USB host */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9n12"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
+#define CONFIG_USB_STORAGE
+#endif
+
 #ifdef CONFIG_SYS_USE_SPIFLASH

 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@ -159,13 +159,14 @@
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
 #else
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9x5"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
 #endif
-#define CONFIG_USB_ATMEL
 #define CONFIG_USB_STORAGE
 #endif

--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@ -346,6 +346,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@ -160,6 +160,7 @@

 #if defined(CONFIG_CMD_USB)
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@ -36,7 +36,7 @@
 #define CONFIG_SYS_TEXT_BASE		0x00000000
 #else
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE		0x21f00000
+#define CONFIG_SYS_TEXT_BASE		0x21800000
 #endif
 #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 #define CONFIG_STANDALONE_LOAD_ADDR	0x21000000
@ -133,6 +133,7 @@
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_UBIFS
+
 #define CONFIG_SYS_LONGHELP

 /*
@ -162,6 +163,7 @@
 * Hardware drivers
 */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_AT91C_PQFP_UHPBUG
 #define CONFIG_USB_STORAGE
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@ -178,6 +178,7 @@
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00500000
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@ -157,6 +157,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@ -207,6 +207,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@ -245,6 +245,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW			1
 #define CONFIG_DOS_PARTITION			1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@ -272,6 +272,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW			1
 #define CONFIG_DOS_PARTITION			1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@ -120,6 +120,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW		1
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT	1
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@ -153,6 +153,7 @@

 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@ -119,6 +119,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@ -65,6 +65,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@ -165,6 +165,7 @@

 /* USB configuration */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@ -174,6 +174,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@ -116,6 +116,7 @@

 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT