@ -42,6 +42,11 @@
# include <asm/arch/sys_proto.h>
# include <asm/gpio.h>
# include <asm/mach-types.h>
# include <asm/omap_musb.h>
# include <asm/errno.h>
# include <linux/usb/ch9.h>
# include <linux/usb/gadget.h>
# include <linux/usb/musb.h>
# include "beagle.h"
# include <command.h>
@ -285,6 +290,33 @@ static void beagle_dvi_pup(void)
}
# endif
# ifdef CONFIG_USB_MUSB_OMAP2PLUS
static struct musb_hdrc_config musb_config = {
. multipoint = 1 ,
. dyn_fifo = 1 ,
. num_eps = 16 ,
. ram_bits = 12 ,
} ;
static struct omap_musb_board_data musb_board_data = {
. interface_type = MUSB_INTERFACE_ULPI ,
} ;
static struct musb_hdrc_platform_data musb_plat = {
# if defined(CONFIG_MUSB_HOST)
. mode = MUSB_HOST ,
# elif defined(CONFIG_MUSB_GADGET)
. mode = MUSB_PERIPHERAL ,
# else
# error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
# endif
. config = & musb_config ,
. power = 100 ,
. platform_ops = & omap2430_ops ,
. board_data = & musb_board_data ,
} ;
# endif
/*
* Routine : misc_init_r
* Description : Configure board specific parts
@ -466,6 +498,10 @@ int misc_init_r(void)
omap3_dss_enable ( ) ;
# endif
# ifdef CONFIG_USB_MUSB_OMAP2PLUS
musb_register ( & musb_plat , & musb_board_data , ( void * ) MUSB_BASE ) ;
# endif
return 0 ;
}
@ -513,3 +549,10 @@ int ehci_hcd_stop(int index)
}
# endif /* CONFIG_USB_EHCI */
# if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
int board_eth_init ( bd_t * bis )
{
return usb_eth_initialize ( bis ) ;
}
# endif