Add defconfig for the multi board device based on the Allwinner A20 SoC. It contains the A20 Itead Core module and a base board for the external interfaces. The core module comes with 4GB NAND and 1GB DDR RAM. The base board to which the core board is connected provides 3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet port, HDMI, IR receiver, SPDIF and a 32-pin GPIO header. This header expands the features of core board by exposing the VGA pins, audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power.. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>master
parent
a9be871c1b
commit
c7c1b4ea89
@ -0,0 +1,16 @@ |
||||
CONFIG_ARM=y |
||||
CONFIG_ARCH_SUNXI=y |
||||
CONFIG_MACH_SUN7I=y |
||||
CONFIG_DRAM_CLK=480 |
||||
CONFIG_MMC0_CD_PIN="PH1" |
||||
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox" |
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set |
||||
CONFIG_SPL=y |
||||
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" |
||||
#CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)" |
||||
# CONFIG_CMD_IMLS is not set |
||||
# CONFIG_CMD_FLASH is not set |
||||
# CONFIG_CMD_FPGA is not set |
||||
CONFIG_CMD_GPIO=y |
||||
CONFIG_ETH_DESIGNWARE=y |
||||
CONFIG_USB_EHCI_HCD=y |
Loading…
Reference in new issue