Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

hummingboard: Remove unused directory

Browse Source 
The 'mx6-microsom' directory was only used for the previous mx6solo
hummingboard support, which has been removed in favour of the SPL
version.

Remove the remaining piece of the old mx6solo hummingboard support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
master
Fabio Estevam 9 years ago committed by Stefano Babic
parent e06a03625d
commit c8d8d83e4b
3 changed files with 0 additions and 183 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 74
      board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
  2. 33
      board/solidrun/mx6-microsom/clocks.cfg
  3. 76
      board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg

74
board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
Unescape View File

@ -1,74 +0,0 @@
/*
* Copyright (C) 2013 Boundary Devices
* Copyright (C) 2013 SolidRun ltd.
* Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* ZQ Calibrations */
DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003
/* write leveling */
DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x005a0057
DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x004a0052
/*
* DQS gating, read delay, write delay calibration values
* based on calibration compare of 0x00ffff00
*/
DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x02480240
DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02340230
DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40404440
DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x38343034
/* read data bit delay */
DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
/* Complete calibration by forced measurement */
DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
/*
* MMDC init:
* in DDR3, 32-bit mode, only MMDC0 is initiated:
*/
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002d
DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040
DATA 4, MX6_MMDC_P0_MDCFG0, 0x3f435313
DATA 4, MX6_MMDC_P0_MDCFG1, 0xb66e8b63
DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db
DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2
DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
/* CS0_END - 0x2fffffff, 512M */
DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
/* MMDC0_MAARCR ADOPT optimized priorities. Dyn jump disabled */
DATA 4, 0x021b0400, 0x11420000
/* MMDC0_MDCTL- row-14bits; col-10bits; burst length 8;32-bit data bus */
DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000
/*
* Initialize 2GB DDR3 - Hynix H5TQ2G63BFR-H9C
* MR2
*/
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008032
/* MR3 */
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
/* MR1 */
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031
/* MR0 */
DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030
/* ZQ calibration */
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
/* final DDR setup */
DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556d
DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000

33
board/solidrun/mx6-microsom/clocks.cfg
Unescape View File

@ -1,33 +0,0 @@
/*
* Copyright (C) 2013 Boundary Devices
* Copyright (C) 2013 SolidRun ltd.
* Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* set the default clock gate to save power */
DATA 4, CCM_CCGR0, 0x00C03F3F
DATA 4, CCM_CCGR1, 0x0030FC03
DATA 4, CCM_CCGR2, 0x0FFFC000
DATA 4, CCM_CCGR3, 0x3FF00000
DATA 4, CCM_CCGR4, 0x00FFF300
DATA 4, CCM_CCGR5, 0x0F0000C3
DATA 4, CCM_CCGR6, 0x000003FF
/* enable AXI cache for VDOA/VPU/IPU */
DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
/*
* Setup CCM_CCOSR register as follows:
*
* cko1_en = 1 --> CKO1 enabled
* cko1_div = 111 --> divide by 8
* cko1_sel = 1011 --> ahb_clk_root
*
* This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
*/
DATA 4, CCM_CCOSR, 0x000000fb

76
board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg
Unescape View File

@ -1,76 +0,0 @@
/*
* Copyright (C) 2013 Boundary Devices
* Copyright (C) 2013 SolidRun ltd.
* Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* DDR3 settings
* MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
* memory bus width: 64 bits x16/x32/x64
* MX6DL ddr is limited to 800 MHz(400 MHz clock)
* memory bus width: 64 bits x16/x32/x64
* MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
* memory bus width: 32 bits x16/x32
*/
/* DDR IO TYPE */
DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000c0000
DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
/* Clock */
DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028
DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028
/* Address */
DATA 4, MX6_IOM_DRAM_CAS, 0x00000010
DATA 4, MX6_IOM_DRAM_RAS, 0x00000010
DATA 4, MX6_IOM_GRP_ADDDS, 0x00000010
/* Control */
DATA 4, MX6_IOM_DRAM_RESET, 0x00000010
DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000010
DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000010
DATA 4, MX6_IOM_GRP_CTLDS, 0x00000010
/*
* Data Strobe: IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL - DDR_INPUT=0, CMOS,
* CMOS mode saves power, but have less timing margin in case of DDR
* timing issue on your board you can try DDR_MODE: [= 0x00020000]
*/
DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028
DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028
DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028
DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028
DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000000
DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000000
DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000000
DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000000
/*
* DATA:IOMUXC_SW_PAD_CTL_GRP_DDRMODE - DDR_INPUT=0, CMOS,
* CMOS mode saves power, but have less timing margin in case of DDR
* timing issue on your board you can try DDR_MODE: [= 0x00020000]
*/
DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
DATA 4, MX6_IOM_GRP_B0DS, 0x00000028
DATA 4, MX6_IOM_GRP_B1DS, 0x00000028
DATA 4, MX6_IOM_GRP_B2DS, 0x00000028
DATA 4, MX6_IOM_GRP_B3DS, 0x00000028
DATA 4, MX6_IOM_GRP_B4DS, 0x00000000
DATA 4, MX6_IOM_GRP_B5DS, 0x00000000
DATA 4, MX6_IOM_GRP_B6DS, 0x00000000
DATA 4, MX6_IOM_GRP_B7DS, 0x00000000
DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028
DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028
DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028
DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028
DATA 4, MX6_IOM_DRAM_DQM4, 0x00000000
DATA 4, MX6_IOM_DRAM_DQM5, 0x00000000
DATA 4, MX6_IOM_DRAM_DQM6, 0x00000000
DATA 4, MX6_IOM_DRAM_DQM7, 0x00000000
Write Preview
Loading…
Cancel
Save