omap5: add qspi support

Add QSPI definitions and clock configuration support.

Signed-off-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>

arch/arm/cpu/armv7/omap5/hw_data.c

@@ -426,6 +426,10 @@ void enable_basic_clocks(void)
 #ifdef CONFIG_DRIVER_TI_CPSW
 		(*prcm)->cm_gmac_gmac_clkctrl,
 #endif
+
+#ifdef CONFIG_TI_QSPI
+		(*prcm)->cm_l4per_qspi_clkctrl,
+#endif
 		0
 	};
 
@@ -454,6 +458,10 @@ void enable_basic_clocks(void)
 			 clk_modules_explicit_en_essential,
 			 1);
 
+#ifdef CONFIG_TI_QSPI
+	setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
+#endif
+
 	/* Enable SCRM OPT clocks for PER and CORE dpll */
 	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
 			OPTFCLKEN_SCRM_PER_MASK);

arch/arm/cpu/armv7/omap5/prcm-regs.c

@@ -921,6 +921,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_l4per_gpio8_clkctrl			= 0x4a009818,
 	.cm_l4per_mmcsd3_clkctrl		= 0x4a009820,
 	.cm_l4per_mmcsd4_clkctrl		= 0x4a009828,
+	.cm_l4per_qspi_clkctrl			= 0x4a009838,
 	.cm_l4per_uart1_clkctrl			= 0x4a009840,
 	.cm_l4per_uart2_clkctrl			= 0x4a009848,
 	.cm_l4per_uart3_clkctrl			= 0x4a009850,

arch/arm/include/asm/arch-omap5/omap.h

@@ -61,6 +61,9 @@
 /* GPMC */
 #define OMAP54XX_GPMC_BASE	0x50000000
 
+/* QSPI */
+#define QSPI_BASE		0x4B300000
+
 /*
  * Hardware Register Details
  */

arch/arm/include/asm/arch-omap5/spl.h

@@ -15,6 +15,7 @@
 #define BOOT_DEVICE_MMC1        5
 #define BOOT_DEVICE_MMC2        6
 #define BOOT_DEVICE_MMC2_2	7
+#define BOOT_DEVICE_SPI		10
 
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2

arch/arm/include/asm/omap_common.h

@@ -266,6 +266,7 @@ struct prcm_regs {
 	u32 cm_l4per_mmcsd4_clkctrl;
 	u32 cm_l4per_msprohg_clkctrl;
 	u32 cm_l4per_slimbus2_clkctrl;
+	u32 cm_l4per_qspi_clkctrl;
 	u32 cm_l4per_uart1_clkctrl;
 	u32 cm_l4per_uart2_clkctrl;
 	u32 cm_l4per_uart3_clkctrl;