diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c
index 1e7d48f..b42dac3 100644
--- a/arch/arm/cpu/arm1136/mx31/devices.c
+++ b/arch/arm/cpu/arm1136/mx31/devices.c
@@ -38,7 +38,22 @@ void mx31_uart1_hw_init(void)
 }
 #endif
 
+#ifdef CONFIG_SYS_MX31_UART2
+void mx31_uart2_hw_init(void)
+{
+	/* setup pins for UART2 */
+	mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
+	mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
+}
+#endif
+
 #ifdef CONFIG_MXC_SPI
+/*
+ * Note: putting several spi setups here makes no sense as they may differ
+ * at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3)
+ */
 void mx31_spi2_hw_init(void)
 {
 	/* SPI2 */
diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h
index 3e22d9a..253a0e1 100644
--- a/arch/arm/include/asm/arch-mx31/clock.h
+++ b/arch/arm/include/asm/arch-mx31/clock.h
@@ -40,6 +40,7 @@ extern void mx31_set_pad(enum iomux_pins pin, u32 config);
 extern void mx31_set_gpr(enum iomux_gp_func gp, char en);
 
 void mx31_uart1_hw_init(void);
+void mx31_uart2_hw_init(void);
 void mx31_spi2_hw_init(void);
 void mxc_hw_watchdog_enable(void);
 void mxc_hw_watchdog_reset(void);
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 6ce008d..f487975 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -680,12 +680,23 @@ struct mx31_weim {
 
 /* Register offsets based on IOMUXC_BASE */
 /* 0x00 .. 0x7b */
+#define MUX_CTL_CSPI3_MISO		0x0c
+#define MUX_CTL_CSPI3_SCLK		0x0d
+#define MUX_CTL_CSPI3_SPI_RDY	0x0e
+#define MUX_CTL_CSPI3_MOSI		0x13
+
 #define MUX_CTL_USBH2_DATA1	0x40
 #define MUX_CTL_USBH2_DIR	0x44
 #define MUX_CTL_USBH2_STP	0x45
 #define MUX_CTL_USBH2_NXT	0x46
 #define MUX_CTL_USBH2_DATA0	0x47
 #define MUX_CTL_USBH2_CLK	0x4B
+
+#define MUX_CTL_TXD2		0x70
+#define MUX_CTL_RTS2		0x71
+#define MUX_CTL_CTS2		0x72
+#define MUX_CTL_RXD2		0x77
+
 #define MUX_CTL_RTS1		0x7c
 #define MUX_CTL_CTS1		0x7d
 #define MUX_CTL_DTR_DCE1	0x7e
@@ -743,6 +754,11 @@ struct mx31_weim {
 #define MUX_RTS1__UART1_RTS_B	IOMUX_MODE(MUX_CTL_RTS1, MUX_CTL_FUNC)
 #define MUX_CTS1__UART1_CTS_B	IOMUX_MODE(MUX_CTL_CTS1, MUX_CTL_FUNC)
 
+#define MUX_RXD2__UART2_RXD_MUX	IOMUX_MODE(MUX_CTL_RXD2, MUX_CTL_FUNC)
+#define MUX_TXD2__UART2_TXD_MUX	IOMUX_MODE(MUX_CTL_TXD2, MUX_CTL_FUNC)
+#define MUX_RTS2__UART2_RTS_B	IOMUX_MODE(MUX_CTL_RTS2, MUX_CTL_FUNC)
+#define MUX_CTS2__UART2_CTS_B	IOMUX_MODE(MUX_CTL_CTS2, MUX_CTL_FUNC)
+
 #define MUX_CSPI2_SS0__CSPI2_SS0_B IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_FUNC)
 #define MUX_CSPI2_SS1__CSPI2_SS1_B IOMUX_MODE(MUX_CTL_CSPI2_SS1, MUX_CTL_FUNC)
 #define MUX_CSPI2_SS2__CSPI2_SS2_B IOMUX_MODE(MUX_CTL_CSPI2_SS2, MUX_CTL_FUNC)