sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD>

This was done automatically with the following bits of scripting.

The Kconfig choice content was generated with this script snippet:
    for i in $(git grep -l CONFIG_ARCH_SUNXI configs/*) ; do
        TARGET=$(sed -n -e 's/CONFIG_SYS_EXTRA_OPTIONS="\([^,"]\+\).*/\1/p' $i);
        MACH=$(sed -n -e 's/.*CONFIG_\(MACH_SUN.I\)=./\1/p' $i)
        echo "config TARGET_$TARGET"
        echo "	bool \"$TARGET\""
        echo "	depends on $MACH"
        echo
    done

defconfigs were updated with a sed script (t):
    # Extract board from first entry of CONFIG_SYS_EXTRA_OPTIONS,
    /^CONFIG_SYS_EXTRA_OPTIONS/ {
        s/^\(CONFIG_SYS_EXTRA_OPTIONS="\)\([^,"]\+\),\?\(.*\)/\1\3\nCONFIG_TARGET_\2=y/;

        # Print and delete first line (CONFIG_SYS_EXTRA_OPTIONS), leaving
        # CONFIG_TARGET_<BOARD> in pattern space
        P;D;
    };

    # Move CONFIG_TARGET_<BOARD> to hold space
    /^CONFIG_TARGET/{h;n}

    # Print CONFIG_TARGET_<BOARD> after CONFIG_MACH_<SOC> in either SPL or
    # normal mode.
    /^CONFIG_MACH/{p;g;p;n};
    /^\+S:CONFIG_MACH/{p;g;s/^CONFIG_TARGET/+S:&/;p;n};

    # Print any remaining lines normally
    p;
Run as:
    sed -i -n -f t $(git grep -l CONFIG_ARCH_SUNXI configs/*)
and then manually removing the one instance of CONFIG_SYS_EXTRA_OPTIONS="" from
Colombus_defconfig

board/sunxi/Makefile was updated with:
    sed -e 's/^\(obj-\$(CONFIG_\)\(.*\)\().*+= dram_.*\)/\1TARGET_\2\3/g' board/sunxi/Makefile
and manually retabbing a few lines to line up again.

The board descriptions could certainly be improved.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

board/sunxi/Kconfig

@@ -36,6 +36,107 @@ config SYS_CONFIG_NAME
 	default "sun7i" if MACH_SUN7I
 	default "sun8i" if MACH_SUN8I
 
+choice
+	prompt "Board"
+
+config TARGET_A10_OLINUXINO_L
+	bool "A10_OLINUXINO_L"
+	depends on MACH_SUN4I
+
+config TARGET_A10S_OLINUXINO_M
+	bool "A10S_OLINUXINO_M"
+	depends on MACH_SUN5I
+
+config TARGET_A13_OLINUXINOM
+	bool "A13_OLINUXINOM"
+	depends on MACH_SUN5I
+
+config TARGET_A13_OLINUXINO
+	bool "A13_OLINUXINO"
+	depends on MACH_SUN5I
+
+config TARGET_A20_OLINUXINO_L2
+	bool "A20_OLINUXINO_L2"
+	depends on MACH_SUN7I
+
+config TARGET_A20_OLINUXINO_L
+	bool "A20_OLINUXINO_L"
+	depends on MACH_SUN7I
+
+config TARGET_A20_OLINUXINO_M
+	bool "A20_OLINUXINO_M"
+	depends on MACH_SUN7I
+
+config TARGET_AUXTEK_T004
+	bool "AUXTEK_T004"
+	depends on MACH_SUN5I
+
+config TARGET_BANANAPI
+	bool "BANANAPI"
+	depends on MACH_SUN7I
+
+config TARGET_COLOMBUS
+	bool "COLOMBUS"
+	depends on MACH_SUN6I
+
+config TARGET_CUBIEBOARD2
+	bool "CUBIEBOARD2"
+	depends on MACH_SUN7I
+
+config TARGET_CUBIEBOARD
+	bool "CUBIEBOARD"
+	depends on MACH_SUN4I
+
+config TARGET_CUBIETRUCK
+	bool "CUBIETRUCK"
+	depends on MACH_SUN7I
+
+config TARGET_IPPO_Q8H_V5
+	bool "IPPO_Q8H_V5"
+	depends on MACH_SUN8I
+
+config TARGET_PCDUINO3
+	bool "PCDUINO3"
+	depends on MACH_SUN7I
+
+config TARGET_MELE_A1000G
+	bool "MELE_A1000G"
+	depends on MACH_SUN4I
+
+config TARGET_MELE_A1000
+	bool "MELE_A1000"
+	depends on MACH_SUN4I
+
+config TARGET_MELE_M3
+	bool "MELE_M3"
+	depends on MACH_SUN7I
+
+config TARGET_MINI_X_1GB
+	bool "MINI_X_1GB"
+	depends on MACH_SUN4I
+
+config TARGET_MINI_X
+	bool "MINI_X"
+	depends on MACH_SUN4I
+
+config TARGET_BA10_TV_BOX
+	bool "BA10_TV_BOX"
+	depends on MACH_SUN4I
+
+config TARGET_I12_TVBOX
+	bool "I12_TVBOX"
+	depends on MACH_SUN7I
+
+config TARGET_QT840A
+	bool "QT840A"
+	depends on MACH_SUN7I
+
+config TARGET_R7DONGLE
+	bool "R7DONGLE"
+	depends on MACH_SUN5I
+
+endchoice
+
 config SYS_BOARD
 	default "sunxi"
 

board/sunxi/Makefile

@@ -11,26 +11,26 @@
 obj-y	+= board.o
 obj-$(CONFIG_SUNXI_GMAC)	+= gmac.o
 obj-$(CONFIG_SUNXI_AHCI)	+= ahci.o
-obj-$(CONFIG_A10_OLINUXINO_L)	+= dram_a10_olinuxino_l.o
-obj-$(CONFIG_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_A13_OLINUXINO)	+= dram_a13_olinuxino.o
-obj-$(CONFIG_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
-obj-$(CONFIG_A20_OLINUXINO_L)	+= dram_a20_olinuxino_l.o
-obj-$(CONFIG_A20_OLINUXINO_L2)	+= dram_a20_olinuxino_l2.o
-obj-$(CONFIG_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_A10_OLINUXINO_L)	+= dram_a10_olinuxino_l.o
+obj-$(CONFIG_TARGET_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
+obj-$(CONFIG_TARGET_A13_OLINUXINO)	+= dram_a13_olinuxino.o
+obj-$(CONFIG_TARGET_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_L)	+= dram_a20_olinuxino_l.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_L2)	+= dram_a20_olinuxino_l2.o
+obj-$(CONFIG_TARGET_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
 # This is not a typo, uses the same mem settings as the a10s-olinuxino-m
-obj-$(CONFIG_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
-obj-$(CONFIG_BANANAPI)		+= dram_bananapi.o
-obj-$(CONFIG_CUBIEBOARD)	+= dram_cubieboard.o
-obj-$(CONFIG_CUBIEBOARD2)	+= dram_cubieboard2.o
-obj-$(CONFIG_CUBIETRUCK)	+= dram_cubietruck.o
-obj-$(CONFIG_I12_TVBOX)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_MELE_A1000)	+= dram_sun4i_360_512.o
-obj-$(CONFIG_MELE_A1000G)	+= dram_sun4i_360_1024_iow8.o
-obj-$(CONFIG_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_MINI_X)		+= dram_sun4i_360_512.o
-obj-$(CONFIG_MINI_X_1GB)	+= dram_sun4i_360_1024_iow16.o
-obj-$(CONFIG_PCDUINO3)		+= dram_linksprite_pcduino3.o
-obj-$(CONFIG_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
-obj-$(CONFIG_R7DONGLE)		+= dram_r7dongle.o
+obj-$(CONFIG_TARGET_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
+obj-$(CONFIG_TARGET_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
+obj-$(CONFIG_TARGET_BANANAPI)		+= dram_bananapi.o
+obj-$(CONFIG_TARGET_CUBIEBOARD)		+= dram_cubieboard.o
+obj-$(CONFIG_TARGET_CUBIEBOARD2)	+= dram_cubieboard2.o
+obj-$(CONFIG_TARGET_CUBIETRUCK)		+= dram_cubietruck.o
+obj-$(CONFIG_TARGET_I12_TVBOX)		+= dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_360_512.o
+obj-$(CONFIG_TARGET_MELE_A1000G)	+= dram_sun4i_360_1024_iow8.o
+obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
+obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_360_512.o
+obj-$(CONFIG_TARGET_MINI_X_1GB)		+= dram_sun4i_360_1024_iow16.o
+obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
+obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
+obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o

configs/A10-OLinuXino-Lime_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A10_OLINUXINO_L,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
 CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_A10_OLINUXINO_L=y

configs/A10s-OLinuXino-M_defconfig

@@ -1,5 +1,5 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
 CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 +S:CONFIG_MMC0_CD_PIN="PG1"
@@ -7,3 +7,4 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A10S_OLINUXINO_M=y

configs/A13-OLinuXinoM_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINOM,CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
 CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A13_OLINUXINOM=y

configs/A13-OLinuXino_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINO,CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
 CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_A13_OLINUXINO=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L2,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_L2=y

configs/A20-OLinuXino-Lime_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-olinuxino-lime.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_L=y

configs/A20-OLinuXino_MICRO_defconfig

@@ -1,5 +1,5 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 +S:CONFIG_MMC0_CD_PIN="PH1"
@@ -7,3 +7,4 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_A20_OLINUXINO_M=y

configs/Auxtek-T004_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AUXTEK_T004,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
 CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_AUXTEK_T004=y

configs/Bananapi_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="BANANAPI,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-bananapi.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_BANANAPI=y

configs/Colombus_defconfig

@@ -1,5 +1,5 @@
-CONFIG_SYS_EXTRA_OPTIONS="COLOMBUS"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
+CONFIG_TARGET_COLOMBUS=y
 CONFIG_FDTFILE="sun6i-a31-colombus.dtb"

configs/Cubieboard2_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_CUBIEBOARD2=y

configs/Cubieboard_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
 CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_CUBIEBOARD=y

configs/Cubietruck_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_CUBIETRUCK=y

configs/Ippo_q8h_v5_defconfig

@@ -1,5 +1,6 @@
-CONFIG_SYS_EXTRA_OPTIONS="IPPO_Q8H_V5,CONS_INDEX=5"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN8I=y
+CONFIG_TARGET_IPPO_Q8H_V5=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"

configs/Linksprite_pcDuino3_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="PCDUINO3,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_PCDUINO3=y

configs/Mele_A1000G_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000G,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
 CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MELE_A1000G=y

configs/Mele_A1000_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
 CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MELE_A1000=y

configs/Mele_M3_defconfig

@@ -1,8 +1,9 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-m3.dtb"
 +S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 +S:CONFIG_MMC0_CD_PIN="PH1"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_MELE_M3=y

configs/Mini-X-1Gb_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MINI_X_1GB,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
 CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MINI_X_1GB=y

configs/Mini-X_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="MINI_X,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
 CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_MINI_X=y

configs/ba10_tv_box_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="BA10_TV_BOX,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
 CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN4I=y
++S:CONFIG_TARGET_BA10_TV_BOX=y

configs/i12-tvbox_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="I12_TVBOX,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_I12_TVBOX=y

configs/qt840a_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="QT840A,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_QT840A=y

configs/r7-tv-dongle_defconfig

@@ -1,6 +1,7 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="R7DONGLE,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
 CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
++S:CONFIG_TARGET_R7DONGLE=y