sunxi: add DRAM support to H6

The Allwinner H6 SoC comes with a set of new DRAM controller+PHY combo.
Both the controller and the PHY seem to be originate from DesignWare,
and are similar to the ones in ZynqMP SoCs.

This commit introduces an initial DRAM driver for H6, which contains
only LPDDR3 support. The currently known SBCs with H6 all come with
LPDDR3 memory, including Pine H64 and several Orange Pi's.

The BSP DRAM initialization code is closed source and violates GPL. Code
in this commit is written by experimenting, referring the code/document
of other users of the IPs (mainly the ZynqMP, as it's the only found PHY
reference) and disassebling the BSP blob.

Thanks for Jernej Skrabec for review and fix some issues in this driver
(including the most critical one which made it to work), and rewrite
some code from register dump!

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
lime2-spi
Icenowy Zheng 6 years ago committed by Jagan Teki
parent 42956f1b85
commit da2616543a
  1. 2
      arch/arm/include/asm/arch-sunxi/dram.h
  2. 297
      arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h
  3. 6
      arch/arm/mach-sunxi/Kconfig
  4. 1
      arch/arm/mach-sunxi/Makefile
  5. 755
      arch/arm/mach-sunxi/dram_sun50i_h6.c

@ -27,6 +27,8 @@
#include <asm/arch/dram_sunxi_dw.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/dram_sun9i.h>
#elif defined(CONFIG_MACH_SUN50I_H6)
#include <asm/arch/dram_sun50i_h6.h>
#else
#include <asm/arch/dram_sun4i.h>
#endif

@ -0,0 +1,297 @@
/*
* H6 dram controller register and constant defines
*
* (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SUNXI_DRAM_SUN50I_H6_H
#define _SUNXI_DRAM_SUN50I_H6_H
enum sunxi_dram_type {
SUNXI_DRAM_TYPE_DDR3 = 3,
SUNXI_DRAM_TYPE_DDR4,
SUNXI_DRAM_TYPE_LPDDR2 = 6,
SUNXI_DRAM_TYPE_LPDDR3,
};
/*
* The following information is mainly retrieved by disassembly and some FPGA
* test code of sun50iw3 platform.
*/
struct sunxi_mctl_com_reg {
u32 cr; /* 0x000 control register */
u8 reserved_0x004[4]; /* 0x004 */
u32 unk_0x008; /* 0x008 */
u32 tmr; /* 0x00c timer register */
u8 reserved_0x010[4]; /* 0x010 */
u32 unk_0x014; /* 0x014 */
u8 reserved_0x018[8]; /* 0x018 */
u32 maer0; /* 0x020 master enable register 0 */
u32 maer1; /* 0x024 master enable register 1 */
u32 maer2; /* 0x028 master enable register 2 */
u8 reserved_0x02c[468]; /* 0x02c */
u32 bwcr; /* 0x200 bandwidth control register */
u8 reserved_0x204[12]; /* 0x204 */
/*
* The last master configured by BSP libdram is at 0x49x, so the
* size of this struct array is set to 41 (0x29) now.
*/
struct {
u32 cfg0; /* 0x0 */
u32 cfg1; /* 0x4 */
u8 reserved_0x8[8]; /* 0x8 */
} master[41]; /* 0x210 + index * 0x10 */
};
check_member(sunxi_mctl_com_reg, master[40].reserved_0x8, 0x498);
/*
* The following register information are retrieved from some similar DRAM
* controllers, including the DRAM controllers in Allwinner A23/A80 SoCs,
* Rockchip RK3328 SoC, NXP i.MX7 SoCs and Xilinx Zynq UltraScale+ SoCs.
*
* The DRAM controller in Allwinner A23/A80 SoCs and NXP i.MX7 SoCs seems
* to be older than the one in Allwinner H6, as the DRAMTMG9 register
* is missing in these SoCs. (From the product specifications of these
* SoCs they're not capable of DDR4)
*
* Information sources:
* - dram_sun9i.h and dram_sun8i_a23.h in the same directory.
* - sdram_rk3328.h from the RK3328 TPL DRAM patchset
* - i.MX 7Solo Applications Processor Reference Manual (IMX7SRM)
* - Zynq UltraScale+ MPSoC Register Reference (UG1087)
*/
struct sunxi_mctl_ctl_reg {
u32 mstr; /* 0x000 */
u32 statr; /* 0x004 unused */
u32 mstr1; /* 0x008 unused */
u32 unk_0x00c; /* 0x00c */
u32 mrctrl0; /* 0x010 unused */
u32 mrctrl1; /* 0x014 unused */
u32 mrstatr; /* 0x018 unused */
u32 mrctrl2; /* 0x01c unused */
u32 derateen; /* 0x020 unused */
u32 derateint; /* 0x024 unused */
u8 reserved_0x028[8]; /* 0x028 */
u32 pwrctl; /* 0x030 unused */
u32 pwrtmg; /* 0x034 unused */
u32 hwlpctl; /* 0x038 unused */
u8 reserved_0x03c[20]; /* 0x03c */
u32 rfshctl0; /* 0x050 unused */
u32 rfshctl1; /* 0x054 unused */
u8 reserved_0x058[8]; /* 0x05c */
u32 rfshctl3; /* 0x060 */
u32 rfshtmg; /* 0x064 */
u8 reserved_0x068[104]; /* 0x068 reserved for ECC&CRC (from ZynqMP) */
u32 init[8]; /* 0x0d0 */
u32 dimmctl; /* 0x0f0 unused */
u32 rankctl; /* 0x0f4 */
u8 reserved_0x0f8[8]; /* 0x0f8 */
u32 dramtmg[17]; /* 0x100 */
u8 reserved_0x144[60]; /* 0x144 */
u32 zqctl[3]; /* 0x180 */
u32 zqstat; /* 0x18c unused */
u32 dfitmg0; /* 0x190 */
u32 dfitmg1; /* 0x194 */
u32 dfilpcfg[2]; /* 0x198 unused */
u32 dfiupd[3]; /* 0x1a0 */
u32 reserved_0x1ac; /* 0x1ac */
u32 dfimisc; /* 0x1b0 */
u32 dfitmg2; /* 0x1b4 unused, may not exist */
u8 reserved_0x1b8[8]; /* 0x1b8 */
u32 dbictl; /* 0x1c0 */
u8 reserved_0x1c4[60]; /* 0x1c4 */
u32 addrmap[12]; /* 0x200 */
u8 reserved_0x230[16]; /* 0x230 */
u32 odtcfg; /* 0x240 */
u32 odtmap; /* 0x244 */
u8 reserved_0x248[8]; /* 0x248 */
u32 sched[2]; /* 0x250 */
u8 reserved_0x258[180]; /* 0x258 */
u32 dbgcmd; /* 0x30c unused */
u32 dbgstat; /* 0x310 unused */
u8 reserved_0x314[12]; /* 0x314 */
u32 swctl; /* 0x320 */
u32 swstat; /* 0x324 */
};
check_member(sunxi_mctl_ctl_reg, swstat, 0x324);
#define MSTR_DEVICETYPE_DDR3 BIT(0)
#define MSTR_DEVICETYPE_LPDDR2 BIT(2)
#define MSTR_DEVICETYPE_LPDDR3 BIT(3)
#define MSTR_DEVICETYPE_DDR4 BIT(4)
#define MSTR_DEVICETYPE_MASK GENMASK(5, 0)
#define MSTR_2TMODE BIT(10)
#define MSTR_BUSWIDTH_FULL (0 << 12)
#define MSTR_BUSWIDTH_HALF (1 << 12)
#define MSTR_ACTIVE_RANKS(x) (((x == 2) ? 3 : 1) << 24)
#define MSTR_BURST_LENGTH(x) (((x) >> 1) << 16)
/*
* The following register information is based on Zynq UltraScale+
* MPSoC Register Reference, as it's the currently only known
* DDR PHY similar to the one used in H6; however although the
* map is similar, the bit fields definitions are different.
*
* Other DesignWare DDR PHY's have similar register names, but the
* offset and definitions are both different.
*/
struct sunxi_mctl_phy_reg {
u32 ver; /* 0x000 guess based on similar PHYs */
u32 pir; /* 0x004 */
u8 reserved_0x008[8]; /* 0x008 */
/*
* The ZynqMP manual didn't document PGCR1, however this register
* exists on H6 and referenced by libdram.
*/
u32 pgcr[8]; /* 0x010 */
/*
* By comparing the hardware and the ZynqMP manual, the PGSR seems
* to start at 0x34 on H6.
*/
u8 reserved_0x030[4]; /* 0x030 */
u32 pgsr[3]; /* 0x034 */
u32 ptr[7]; /* 0x040 */
/*
* According to ZynqMP reference there's PLLCR0~6 in this area,
* but they're tagged "Type B PLL Only" and H6 seems to have
* no them.
* 0x080 is not present in ZynqMP reference but it seems to be
* present on H6.
*/
u8 reserved_0x05c[36]; /* 0x05c */
u32 unk_0x080; /* 0x080 */
u8 reserved_0x084[4]; /* 0x084 */
u32 dxccr; /* 0x088 */
u8 reserved_0x08c[4]; /* 0x08c */
u32 dsgcr; /* 0x090 */
u8 reserved_0x094[4]; /* 0x094 */
u32 odtcr; /* 0x098 */
u8 reserved_0x09c[4]; /* 0x09c */
u32 aacr; /* 0x0a0 */
u8 reserved_0x0a4[32]; /* 0x0a4 */
u32 gpr1; /* 0x0c4 */
u8 reserved_0x0c8[56]; /* 0x0c8 */
u32 dcr; /* 0x100 */
u8 reserved_0x104[12]; /* 0x104 */
u32 dtpr[7]; /* 0x110 */
u8 reserved_0x12c[20]; /* 0x12c */
u32 rdimmgcr[3]; /* 0x140 */
u8 reserved_0x14c[4]; /* 0x14c */
u32 rdimmcr[5]; /* 0x150 */
u8 reserved_0x164[4]; /* 0x164 */
u32 schcr[2]; /* 0x168 */
u8 reserved_0x170[16]; /* 0x170 */
/*
* The ZynqMP manual documents MR0~7, 11~14 and 22.
*/
u32 mr[23]; /* 0x180 */
u8 reserved_0x1dc[36]; /* 0x1dc */
u32 dtcr[2]; /* 0x200 */
u32 dtar[3]; /* 0x208 */
u8 reserved_0x214[4]; /* 0x214 */
u32 dtdr[2]; /* 0x218 */
u8 reserved_0x220[16]; /* 0x220 */
u32 dtedr0; /* 0x230 */
u32 dtedr1; /* 0x234 */
u32 dtedr2; /* 0x238 */
u32 vtdr; /* 0x23c */
u32 catr[2]; /* 0x240 */
u8 reserved_0x248[8];
u32 dqsdr[3]; /* 0x250 */
u32 dtedr3; /* 0x25c */
u8 reserved_0x260[160]; /* 0x260 */
u32 dcuar; /* 0x300 */
u32 dcudr; /* 0x304 */
u32 dcurr; /* 0x308 */
u32 dculr; /* 0x30c */
u32 dcugcr; /* 0x310 */
u32 dcutpr; /* 0x314 */
u32 dcusr[2]; /* 0x318 */
u8 reserved_0x320[444]; /* 0x320 */
u32 rankidr; /* 0x4dc */
u32 riocr[6]; /* 0x4e0 */
u8 reserved_0x4f8[8]; /* 0x4f8 */
u32 aciocr[6]; /* 0x500 */
u8 reserved_0x518[8]; /* 0x518 */
u32 iovcr[2]; /* 0x520 */
u32 vtcr[2]; /* 0x528 */
u8 reserved_0x530[16]; /* 0x530 */
u32 acbdlr[17]; /* 0x540 */
u32 aclcdlr; /* 0x584 */
u8 reserved_0x588[24]; /* 0x588 */
u32 acmdlr[2]; /* 0x5a0 */
u8 reserved_0x5a8[216]; /* 0x5a8 */
struct {
u32 zqcr; /* 0x00 only the first one valid */
u32 zqpr[2]; /* 0x04 */
u32 zqdr[2]; /* 0x0c */
u32 zqor[2]; /* 0x14 */
u32 zqsr; /* 0x1c */
} zq[2]; /* 0x680, 0x6a0 */
u8 reserved_0x6c0[64]; /* 0x6c0 */
struct {
u32 gcr[7]; /* 0x00 */
u8 reserved_0x1c[36]; /* 0x1c */
u32 bdlr0; /* 0x40 */
u32 bdlr1; /* 0x44 */
u32 bdlr2; /* 0x48 */
u8 reserved_0x4c[4]; /* 0x4c */
u32 bdlr3; /* 0x50 */
u32 bdlr4; /* 0x54 */
u32 bdlr5; /* 0x58 */
u8 reserved_0x5c[4]; /* 0x5c */
u32 bdlr6; /* 0x60 */
u8 reserved_0x64[28]; /* 0x64 */
u32 lcdlr[6]; /* 0x80 */
u8 reserved_0x98[8]; /* 0x98 */
u32 mdlr[2]; /* 0xa0 */
u8 reserved_0xa8[24]; /* 0xa8 */
u32 gtr0; /* 0xc0 */
u8 reserved_0xc4[12]; /* 0xc4 */
/*
* DXnRSR0 is not documented in ZynqMP manual but
* it's used in libdram.
*/
u32 rsr[4]; /* 0xd0 */
u32 gsr[4]; /* 0xe0 */
u8 reserved_0xf0[16]; /* 0xf0 */
} dx[4]; /* 0x700, 0x800, 0x900, 0xa00 */
};
check_member(sunxi_mctl_phy_reg, dx[3].reserved_0xf0, 0xaf0);
#define PIR_INIT BIT(0)
#define PIR_ZCAL BIT(1)
#define PIR_CA BIT(2)
#define PIR_PLLINIT BIT(4)
#define PIR_DCAL BIT(5)
#define PIR_PHYRST BIT(6)
#define PIR_DRAMRST BIT(7)
#define PIR_DRAMINIT BIT(8)
#define PIR_WL BIT(9)
#define PIR_QSGATE BIT(10)
#define PIR_WLADJ BIT(11)
#define PIR_RDDSKW BIT(12)
#define PIR_WRDSKW BIT(13)
#define PIR_RDEYE BIT(14)
#define PIR_WREYE BIT(15)
#define PIR_VREF BIT(17)
#define PIR_CTLDINIT BIT(18)
#define PIR_DQS2DQ BIT(20)
#define PIR_DCALPSE BIT(29)
#define PIR_ZCALBYP BIT(30)
#define DCR_LPDDR3 (1 << 0)
#define DCR_DDR3 (3 << 0)
#define DCR_DDR4 (4 << 0)
#define DCR_DDR8BANK BIT(3)
static inline int ns_to_t(int nanoseconds)
{
const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
}
#endif /* _SUNXI_DRAM_SUN50I_H6_H */

@ -42,6 +42,12 @@ config DRAM_SUN9I
Select this dram controller driver for Sun9i platforms,
like A80.
config DRAM_SUN50I_H6
bool
help
Select this dram controller driver for some sun50i platforms,
like H6.
config SUN6I_P2WI
bool "Allwinner sun6i internal P2WI controller"
help

@ -38,4 +38,5 @@ obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o
obj-$(CONFIG_SPL_SPI_SUNXI) += spl_spi_sunxi.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/
obj-$(CONFIG_DRAM_SUN50I_H6) += dram_sun50i_h6.o
endif

@ -0,0 +1,755 @@
/*
* sun50i H6 platform dram controller init
*
* (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/dram.h>
#include <asm/arch/cpu.h>
#include <linux/bitops.h>
#include <linux/kconfig.h>
/*
* The DRAM controller structure on H6 is similar to the ones on A23/A80:
* they all contains 3 parts, COM, CTL and PHY. (As a note on A33/A83T/H3/A64
* /H5/R40 CTL and PHY is composed).
*
* COM is allwinner-specific. On H6, the address mapping function is moved
* from COM to CTL (with the standard ADDRMAP registers on DesignWare memory
* controller).
*
* CTL (controller) and PHY is from DesignWare.
*
* The CTL part is a bit similar to the one on A23/A80 (because they all
* originate from DesignWare), but gets more registers added.
*
* The PHY part is quite new, not seen in any previous Allwinner SoCs, and
* not seen on other SoCs in U-Boot. The only SoC that is also known to have
* similar PHY is ZynqMP.
*/
/*
* The delay parameters below allow to allegedly specify delay times of some
* unknown unit for each individual bit trace in each of the four data bytes
* the 32-bit wide access consists of. Also three control signals can be
* adjusted individually.
*/
#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE)
/* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */
#define WR_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 4)
/*
* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN,
* Termination and Power down
*/
#define RD_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 6)
struct dram_para {
u32 clk;
enum sunxi_dram_type type;
u8 cols;
u8 rows;
u8 ranks;
const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE];
const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE];
};
static void mctl_sys_init(struct dram_para *para);
static void mctl_com_init(struct dram_para *para);
static void mctl_set_timing_lpddr3(struct dram_para *para);
static void mctl_channel_init(struct dram_para *para);
static void mctl_core_init(struct dram_para *para)
{
mctl_sys_init(para);
mctl_com_init(para);
switch (para->type) {
case SUNXI_DRAM_TYPE_LPDDR3:
mctl_set_timing_lpddr3(para);
break;
default:
panic("Unsupported DRAM type!");
};
mctl_channel_init(para);
}
static void mctl_phy_pir_init(u32 val)
{
struct sunxi_mctl_phy_reg * const mctl_phy =
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
writel(val | BIT(0), &mctl_phy->pir);
mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0));
}
enum {
MBUS_PORT_CPU = 0,
MBUS_PORT_GPU = 1,
MBUS_PORT_MAHB = 2,
MBUS_PORT_DMA = 3,
MBUS_PORT_VE = 4,
MBUS_PORT_CE = 5,
MBUS_PORT_TSC0 = 6,
MBUS_PORT_NDFC0 = 8,
MBUS_PORT_CSI0 = 11,
MBUS_PORT_DI0 = 14,
MBUS_PORT_DI1 = 15,
MBUS_PORT_DE300 = 16,
MBUS_PORT_IOMMU = 25,
MBUS_PORT_VE2 = 26,
MBUS_PORT_USB3 = 37,
MBUS_PORT_PCIE = 38,
MBUS_PORT_VP9 = 39,
MBUS_PORT_HDCP2 = 40,
};
enum {
MBUS_QOS_LOWEST = 0,
MBUS_QOS_LOW,
MBUS_QOS_HIGH,
MBUS_QOS_HIGHEST
};
inline void mbus_configure_port(u8 port,
bool bwlimit,
bool priority,
u8 qos,
u8 waittime,
u8 acs,
u16 bwl0,
u16 bwl1,
u16 bwl2)
{
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
| (priority ? (1 << 1) : 0)
| ((qos & 0x3) << 2)
| ((waittime & 0xf) << 4)
| ((acs & 0xff) << 8)
| (bwl0 << 16) );
const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
writel(cfg0, &mctl_com->master[port].cfg0);
writel(cfg1, &mctl_com->master[port].cfg1);
}
#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2) \
mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \
MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
static void mctl_set_master_priority(void)
{
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
/* enable bandwidth limit windows and set windows size 1us */
writel(399, &mctl_com->tmr);
writel(BIT(16), &mctl_com->bwcr);
MBUS_CONF( CPU, true, HIGHEST, 0, 256, 128, 100);
MBUS_CONF( GPU, true, HIGH, 0, 1536, 1400, 256);
MBUS_CONF( MAHB, true, HIGHEST, 0, 512, 256, 96);
MBUS_CONF( DMA, true, HIGH, 0, 256, 100, 80);
MBUS_CONF( VE, true, HIGH, 2, 8192, 5500, 5000);
MBUS_CONF( CE, true, HIGH, 2, 100, 64, 32);
MBUS_CONF( TSC0, true, HIGH, 2, 100, 64, 32);
MBUS_CONF(NDFC0, true, HIGH, 0, 256, 128, 64);
MBUS_CONF( CSI0, true, HIGH, 0, 256, 128, 100);
MBUS_CONF( DI0, true, HIGH, 0, 1024, 256, 64);
MBUS_CONF(DE300, true, HIGHEST, 6, 8192, 2800, 2400);
MBUS_CONF(IOMMU, true, HIGHEST, 0, 100, 64, 32);
MBUS_CONF( VE2, true, HIGH, 2, 8192, 5500, 5000);
MBUS_CONF( USB3, true, HIGH, 0, 256, 128, 64);
MBUS_CONF( PCIE, true, HIGH, 2, 100, 64, 32);
MBUS_CONF( VP9, true, HIGH, 2, 8192, 5500, 5000);
MBUS_CONF(HDCP2, true, HIGH, 2, 100, 64, 32);
}
static u32 mr_lpddr3[12] = {
0x00000000, 0x00000043, 0x0000001a, 0x00000001,
0x00000000, 0x00000000, 0x00000048, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000003,
};
/* TODO: flexible timing */
static void mctl_set_timing_lpddr3(struct dram_para *para)
{
struct sunxi_mctl_ctl_reg * const mctl_ctl =
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
struct sunxi_mctl_phy_reg * const mctl_phy =
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
u8 tccd = 2;
u8 tfaw = max(ns_to_t(50), 4);
u8 trrd = max(ns_to_t(10), 2);
u8 trcd = max(ns_to_t(24), 2);
u8 trc = ns_to_t(70);
u8 txp = max(ns_to_t(8), 2);
u8 twtr = max(ns_to_t(8), 2);
u8 trtp = max(ns_to_t(8), 2);
u8 twr = max(ns_to_t(15), 2);
u8 trp = ns_to_t(18);
u8 tras = ns_to_t(42);
u8 twtr_sa = ns_to_t(5);
u8 tcksrea = ns_to_t(11);
u16 trefi = ns_to_t(3900) / 32;
u16 trfc = ns_to_t(210);
u16 txsr = ns_to_t(220);
if (CONFIG_DRAM_CLK % 400 == 0) {
/* Round up these parameters */
twtr_sa++;
tcksrea++;
}
u8 tmrw = 5;
u8 tmrd = 5;
u8 tmod = 12;
u8 tcke = 3;
u8 tcksrx = 5;
u8 tcksre = 5;
u8 tckesr = 5;
u8 trasmax = CONFIG_DRAM_CLK / 60;
u8 txs = 4;
u8 txsdll = 4;
u8 txsabort = 4;
u8 txsfast = 4;
u8 tcl = 5; /* CL 10 */
u8 tcwl = 3; /* CWL 6 */
u8 t_rdata_en = twtr_sa + 8;
u32 tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
u32 tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */
u32 tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 11us */
u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
u8 twtp = tcwl + 4 + twr + 1;
/*
* The code below for twr2rd and trd2wr follows the IP core's
* document from ZynqMP and i.MX7. The BSP has both number
* substracted by 2.
*/
u8 twr2rd = tcwl + 4 + 1 + twtr;
u8 trd2wr = tcl + 4 + (tcksrea >> 1) - tcwl + 1;
/* set mode register */
memcpy(mctl_phy->mr, mr_lpddr3, sizeof(mr_lpddr3));
/* set DRAM timing */
writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
&mctl_ctl->dramtmg[0]);
writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
&mctl_ctl->dramtmg[2]);
writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
&mctl_ctl->dramtmg[4]);
writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
&mctl_ctl->dramtmg[5]);
/* Value suggested by ZynqMP manual and used by libdram */
writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
&mctl_ctl->dramtmg[8]);
writel(txsr, &mctl_ctl->dramtmg[14]);
clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30));
writel(0, &mctl_ctl->dfimisc);
clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
/*
* Set timing registers of the PHY.
* Note: the PHY is clocked 2x from the DRAM frequency.
*/
writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1),
&mctl_phy->dtpr[0]);
writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]);
writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]);
writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8),
&mctl_phy->dtpr[3]);
writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]);
writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]);
writel(0x0505, &mctl_phy->dtpr[6]);
/* Configure DFI timing */
writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000,
&mctl_ctl->dfitmg0);
writel(0x040201, &mctl_ctl->dfitmg1);
/* Configure PHY timing */
writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]);
writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]);
/* set refresh timing */
writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
}
static void mctl_sys_init(struct dram_para *para)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
struct sunxi_mctl_ctl_reg * const mctl_ctl =
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
/* Put all DRAM-related blocks to reset state */
clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE | MBUS_RESET);
writel(0, &ccm->dram_gate_reset);
clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
udelay(5);
/* Set PLL5 rate to doubled DRAM clock rate */
writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN |
CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg);
mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK);
/* Configure DRAM mod clock */
writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg);
setbits_le32(&ccm->dram_clk_cfg, DRAM_CLK_UPDATE);
writel(BIT(0) | BIT(RESET_SHIFT), &ccm->dram_gate_reset);
/* Disable all channels */
writel(0, &mctl_com->maer0);
writel(0, &mctl_com->maer1);
writel(0, &mctl_com->maer2);
/* Configure MBUS and enable DRAM mod reset */
setbits_le32(&ccm->mbus_cfg, MBUS_RESET);
setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
udelay(5);
/* Unknown hack from the BSP, which enables access of mctl_ctl regs */
writel(0x8000, &mctl_ctl->unk_0x00c);
}
static void mctl_set_addrmap(struct dram_para *para)
{
struct sunxi_mctl_ctl_reg * const mctl_ctl =
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
u8 cols = para->cols;
u8 rows = para->rows;
u8 ranks = para->ranks;
/* Ranks */
if (ranks == 2)
mctl_ctl->addrmap[0] = rows + cols - 3;
else
mctl_ctl->addrmap[0] = 0x1F;
/* Banks, hardcoded to 8 banks now */
mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16;
/* Columns */
mctl_ctl->addrmap[2] = 0;
switch (cols) {
case 8:
mctl_ctl->addrmap[3] = 0x1F1F0000;
mctl_ctl->addrmap[4] = 0x1F1F;
break;
case 9:
mctl_ctl->addrmap[3] = 0x1F000000;
mctl_ctl->addrmap[4] = 0x1F1F;
break;
case 10:
mctl_ctl->addrmap[3] = 0;
mctl_ctl->addrmap[4] = 0x1F1F;
break;
case 11:
mctl_ctl->addrmap[3] = 0;
mctl_ctl->addrmap[4] = 0x1F00;
break;
case 12:
mctl_ctl->addrmap[3] = 0;
mctl_ctl->addrmap[4] = 0;
break;
default:
panic("Unsupported DRAM configuration: column number invalid\n");
}
/* Rows */
mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
switch (rows) {
case 13:
mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00;
mctl_ctl->addrmap[7] = 0x0F0F;
break;
case 14:
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000;
mctl_ctl->addrmap[7] = 0x0F0F;
break;
case 15:
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000;
mctl_ctl->addrmap[7] = 0x0F0F;
break;
case 16:
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
mctl_ctl->addrmap[7] = 0x0F0F;
break;
case 17:
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00;
break;
case 18:
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8);
break;
default:
panic("Unsupported DRAM configuration: row number invalid\n");
}
/* Bank groups, DDR4 only */
mctl_ctl->addrmap[8] = 0x3F3F;
}
static void mctl_com_init(struct dram_para *para)
{
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
struct sunxi_mctl_ctl_reg * const mctl_ctl =
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
struct sunxi_mctl_phy_reg * const mctl_phy =
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
u32 reg_val, tmp;
mctl_set_addrmap(para);
setbits_le32(&mctl_com->cr, BIT(31));
/*
* This address is magic; it's in SID memory area, but there's no
* known definition of it.
* On my Pine H64 board it has content 7.
*/
if (readl(0x03006100) == 7)
clrbits_le32(&mctl_com->cr, BIT(27));
else if (readl(0x03006100) == 3)
setbits_le32(&mctl_com->cr, BIT(27));
if (para->clk > 408)
reg_val = 0xf00;
else if (para->clk > 246)
reg_val = 0x1f00;
else
reg_val = 0x3f00;
clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val);
/* TODO: half DQ, non-LPDDR3 types */
writel(MSTR_DEVICETYPE_LPDDR3 | MSTR_BUSWIDTH_FULL |
MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks) |
0x80000000, &mctl_ctl->mstr);
writel(DCR_LPDDR3 | DCR_DDR8BANK | 0x400, &mctl_phy->dcr);
if (para->ranks == 2)
writel(0x0303, &mctl_ctl->odtmap);
else
writel(0x0201, &mctl_ctl->odtmap);
/* TODO: non-LPDDR3 types */
tmp = para->clk * 7 / 2000;
reg_val = 0x0400;
reg_val |= (tmp + 7) << 24;
reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16;
writel(reg_val, &mctl_ctl->odtcfg);
/* TODO: half DQ */
}
static void mctl_bit_delay_set(struct dram_para *para)
{
struct sunxi_mctl_phy_reg * const mctl_phy =
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
int i, j;
u32 val;
for (i = 0; i < 4; i++) {
val = readl(&mctl_phy->dx[i].bdlr0);
for (j = 0; j < 4; j++)
val += para->dx_write_delays[i][j] << (j * 8);
writel(val, &mctl_phy->dx[i].bdlr0);
val = readl(&mctl_phy->dx[i].bdlr1);
for (j = 0; j < 4; j++)
val += para->dx_write_delays[i][j + 4] << (j * 8);
writel(val, &mctl_phy->dx[i].bdlr1);
val = readl(&mctl_phy->dx[i].bdlr2);
for (j = 0; j < 4; j++)
val += para->dx_write_delays[i][j + 8] << (j * 8);
writel(val, &mctl_phy->dx[i].bdlr2);
}
clrbits_le32(&mctl_phy->pgcr[0], BIT(26));
for (i = 0; i < 4; i++) {
val = readl(&mctl_phy->dx[i].bdlr3);
for (j = 0; j < 4; j++)
val += para->dx_read_delays[i][j] << (j * 8);
writel(val, &mctl_phy->dx[i].bdlr3);
val = readl(&mctl_phy->dx[i].bdlr4);
for (j = 0; j < 4; j++)
val += para->dx_read_delays[i][j + 4] << (j * 8);
writel(val, &mctl_phy->dx[i].bdlr4);
val = readl(&mctl_phy->dx[i].bdlr5);
for (j = 0; j < 4; j++)
val += para->dx_read_delays[i][j + 8] << (j * 8);
writel(val, &mctl_phy->dx[i].bdlr5);
val = readl(&mctl_phy->dx[i].bdlr6);
val += (para->dx_read_delays[i][12] << 8) |
(para->dx_read_delays[i][13] << 16);
writel(val, &mctl_phy->dx[i].bdlr6);
}
setbits_le32(&mctl_phy->pgcr[0], BIT(26));
udelay(1);
for (i = 1; i < 14; i++) {
val = readl(&mctl_phy->acbdlr[i]);
val += 0x0a0a0a0a;
writel(val, &mctl_phy->acbdlr[i]);
}
}
static void mctl_channel_init(struct dram_para *para)
{
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
struct sunxi_mctl_ctl_reg * const mctl_ctl =
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
struct sunxi_mctl_phy_reg * const mctl_phy =
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
int i;
u32 val;
setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30));
setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30));
writel(0x2f05, &mctl_ctl->sched[0]);
setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
setbits_le32(&mctl_ctl->dfimisc, BIT(0));
setbits_le32(&mctl_ctl->unk_0x00c, BIT(8));
clrsetbits_le32(&mctl_phy->pgcr[1], 0x180, 0xc0);
/* TODO: non-LPDDR3 types */
clrsetbits_le32(&mctl_phy->pgcr[2], GENMASK(17, 0), ns_to_t(7800));
clrbits_le32(&mctl_phy->pgcr[6], BIT(0));
clrsetbits_le32(&mctl_phy->dxccr, 0xee0, 0x220);
/* TODO: VT compensation */
clrsetbits_le32(&mctl_phy->dsgcr, BIT(0), 0x440060);
clrbits_le32(&mctl_phy->vtcr[1], BIT(1));
for (i = 0; i < 4; i++)
clrsetbits_le32(&mctl_phy->dx[i].gcr[0], 0xe00, 0x800);
for (i = 0; i < 4; i++)
clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, 0x5555);
for (i = 0; i < 4; i++)
clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, 0x1010);
udelay(100);
if (para->ranks == 2)
setbits_le32(&mctl_phy->dtcr[1], 0x30000);
else
clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000);
clrbits_le32(&mctl_phy->dtcr[1], BIT(1));
if (para->ranks == 2) {
writel(0x00010001, &mctl_phy->rankidr);
writel(0x20000, &mctl_phy->odtcr);
} else {
writel(0x0, &mctl_phy->rankidr);
writel(0x10000, &mctl_phy->odtcr);
}
/* TODO: non-LPDDR3 types */
clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040);
if (para->clk <= 792) {
if (para->clk <= 672) {
if (para->clk <= 600)
val = 0x300;
else
val = 0x400;
} else {
val = 0x500;
}
} else {
val = 0x600;
}
/* FIXME: NOT REVIEWED YET */
clrsetbits_le32(&mctl_phy->zq[0].zqcr, 0x700, val);
clrsetbits_le32(&mctl_phy->zq[0].zqpr[0], 0xff,
CONFIG_DRAM_ZQ & 0xff);
clrbits_le32(&mctl_phy->zq[0].zqor[0], 0xfffff);
setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ >> 8) & 0xff);
setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xf00) - 0x100);
setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xff00) << 4);
clrbits_le32(&mctl_phy->zq[1].zqpr[0], 0xfffff);
setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ >> 16) & 0xff);
setbits_le32(&mctl_phy->zq[1].zqpr[0], ((CONFIG_DRAM_ZQ >> 8) & 0xf00) - 0x100);
setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ & 0xff0000) >> 4);
if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
for (i = 1; i < 14; i++)
writel(0x06060606, &mctl_phy->acbdlr[i]);
}
/* TODO: non-LPDDR3 types */
mctl_phy_pir_init(PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT |
PIR_QSGATE | PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE |
PIR_WREYE);
/* TODO: non-LPDDR3 types */
for (i = 0; i < 4; i++)
writel(0x00000909, &mctl_phy->dx[i].gcr[5]);
for (i = 0; i < 4; i++) {
if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
val = 0x0;
else
val = 0xaaaa;
clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, val);
if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
val = 0x0;
else
val = 0x2020;
clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, val);
}
mctl_bit_delay_set(para);
udelay(1);
setbits_le32(&mctl_phy->pgcr[6], BIT(0));
clrbits_le32(&mctl_phy->pgcr[6], 0xfff8);
for (i = 0; i < 4; i++)
clrbits_le32(&mctl_phy->dx[i].gcr[3], ~0x3ffff);
udelay(10);
if (readl(&mctl_phy->pgsr[0]) & 0x400000)
{
/*
* Detect single rank.
* TODO: also detect half DQ.
*/
if ((readl(&mctl_phy->dx[0].rsr[0]) & 0x3) == 2 &&
(readl(&mctl_phy->dx[1].rsr[0]) & 0x3) == 2 &&
(readl(&mctl_phy->dx[2].rsr[0]) & 0x3) == 2 &&
(readl(&mctl_phy->dx[3].rsr[0]) & 0x3) == 2) {
para->ranks = 1;
/* Restart DRAM initialization from scratch. */
mctl_core_init(para);
return;
}
else {
panic("This DRAM setup is currently not supported.\n");
}
}
if (readl(&mctl_phy->pgsr[0]) & 0xff00000) {
/* Oops! There's something wrong! */
debug("PLL = %x\n", readl(0x3001010));
debug("DRAM PHY PGSR0 = %x\n", readl(&mctl_phy->pgsr[0]));
for (i = 0; i < 4; i++)
debug("DRAM PHY DX%dRSR0 = %x\n", i, readl(&mctl_phy->dx[i].rsr[0]));
panic("Error while initializing DRAM PHY!\n");
}
clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40);
clrbits_le32(&mctl_phy->pgcr[1], 0x40);
clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
writel(1, &mctl_ctl->swctl);
mctl_await_completion(&mctl_ctl->swstat, 1, 1);
clrbits_le32(&mctl_ctl->rfshctl3, BIT(0));
setbits_le32(&mctl_com->unk_0x014, BIT(31));
writel(0xffffffff, &mctl_com->maer0);
writel(0x7ff, &mctl_com->maer1);
writel(0xffff, &mctl_com->maer2);
}
static void mctl_auto_detect_dram_size(struct dram_para *para)
{
/* TODO: non-LPDDR3, half DQ */
/*
* Detect rank number by the code in mctl_channel_init. Furtherly
* when DQ detection is available it will also be executed there.
*/
mctl_core_init(para);
/* detect row address bits */
para->cols = 8;
para->rows = 18;
mctl_core_init(para);
for (para->rows = 13; para->rows < 18; para->rows++) {
/* 8 banks, 8 bit per byte and 32 bit width */
if (mctl_mem_matches((1 << (para->rows + para->cols + 5))))
break;
}
/* detect column address bits */
para->cols = 11;
mctl_core_init(para);
for (para->cols = 8; para->cols < 11; para->cols++) {
/* 8 bits per byte and 32 bit width */
if (mctl_mem_matches(1 << (para->cols + 2)))
break;
}
}
unsigned long mctl_calc_size(struct dram_para *para)
{
/* TODO: non-LPDDR3, half DQ */
/* 8 banks, 32-bit (4 byte) data width */
return (1ULL << (para->cols + para->rows + 3)) * 4 * para->ranks;
}
#define SUN50I_H6_DX_WRITE_DELAYS \
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4, 0 }, \
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
#define SUN50I_H6_DX_READ_DELAYS \
{{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \
{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \
{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \
{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }}
unsigned long sunxi_dram_init(void)
{
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
struct dram_para para = {
.clk = CONFIG_DRAM_CLK,
.type = SUNXI_DRAM_TYPE_LPDDR3,
.ranks = 2,
.cols = 11,
.rows = 14,
.dx_read_delays = SUN50I_H6_DX_READ_DELAYS,
.dx_write_delays = SUN50I_H6_DX_WRITE_DELAYS,
};
unsigned long size;
/* RES_CAL_CTRL_REG in BSP U-boot*/
setbits_le32(0x7010310, BIT(8));
clrbits_le32(0x7010318, 0x3f);
mctl_auto_detect_dram_size(&para);
mctl_core_init(&para);
size = mctl_calc_size(&para);
clrsetbits_le32(&mctl_com->cr, 0xf0, (size >> (10 + 10 + 4)) & 0xf0);
mctl_set_master_priority();
return size;
};
Loading…
Cancel
Save