driver/ddr/fsl: Add workaround for erratum A-009803

During initial DDR training, false parity errors may be detected.
This patch adds workaround to fix the erratum.
Tested on LS2085QDS and LS2080RDB.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

arch/arm/include/asm/arch-fsl-layerscape/config.h

@@ -121,6 +121,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A008751
 #define CONFIG_SYS_FSL_ERRATUM_A009635
 #define CONFIG_SYS_FSL_ERRATUM_A009663
+#define CONFIG_SYS_FSL_ERRATUM_A009803
 #define CONFIG_SYS_FSL_ERRATUM_A009942
 
 /* ARM A57 CORE ERRATA */

drivers/ddr/fsl/fsl_ddr_gen4.c

@@ -12,7 +12,8 @@
 #include <fsl_ddr.h>
 #include <fsl_errata.h>
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008511
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008511) | \
+	defined(CONFIG_SYS_FSL_ERRATUM_A009803)
 static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
 {
 	int timeout = 1000;
@@ -24,9 +25,9 @@ static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
 		timeout--;
 	}
 	if (timeout <= 0)
-		puts("Error: A007865 wait for clear timeout.\n");
+		puts("Error: wait for clear timeout.\n");
 }
-#endif /* CONFIG_SYS_FSL_ERRATUM_A008511 */
+#endif
 
 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
 #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
@@ -201,7 +202,18 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 		ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
 		ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
 	}
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009803
+	/* part 1 of 2 */
+	if (regs->ddr_sdram_cfg & SDRAM_CFG_RD_EN) { /* for RDIMM */
+		ddr_out32(&ddr->ddr_sdram_rcw_2,
+			  regs->ddr_sdram_rcw_2 & ~0x0f000000);
+	}
+
+	ddr_out32(&ddr->err_disable, regs->err_disable | DDR_ERR_DISABLE_APED);
+#else
 	ddr_out32(&ddr->err_disable, regs->err_disable);
+#endif
 	ddr_out32(&ddr->err_int_en, regs->err_int_en);
 	for (i = 0; i < 32; i++) {
 		if (regs->debug[i]) {
@@ -297,7 +309,8 @@ step2:
 	mb();
 	isb();
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008511
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008511) || \
+	defined(CONFIG_SYS_FSL_ERRATUM_A009803)
 	/* Part 2 of 2 */
 	/* This erraum only applies to verion 5.2.0 */
 	if (fsl_ddr_get_version(ctrl_num) == 0x50200) {
@@ -313,6 +326,7 @@ step2:
 			       ctrl_num, ddr_in32(&ddr->debug[1]));
 		}
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008511
 		/* The vref setting sequence is different for range 2 */
 		if (regs->ddr_cdr2 & DDR_CDR2_VREF_RANGE_2)
 			vref_seq = vref_seq2;
@@ -359,9 +373,29 @@ step2:
 		}
 		/* Restore D_INIT */
 		ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
-	}
 #endif /* CONFIG_SYS_FSL_ERRATUM_A008511 */
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009803
+		/* if it's RDIMM */
+		if (regs->ddr_sdram_cfg & SDRAM_CFG_RD_EN) {
+			for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+				if (!(regs->cs[i].config & SDRAM_CS_CONFIG_EN))
+					continue;
+				set_wait_for_bits_clear(&ddr->sdram_md_cntl,
+							MD_CNTL_MD_EN |
+							MD_CNTL_CS_SEL(i) |
+							0x070000ed,
+							MD_CNTL_MD_EN);
+				udelay(1);
+			}
+		}
+
+		ddr_out32(&ddr->err_disable,
+			  regs->err_disable & ~DDR_ERR_DISABLE_APED);
+#endif
+	}
+#endif
+
 	total_gb_size_per_controller = 0;
 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 		if (!(regs->cs[i].config & 0x80000000))