diff --git a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi index 9c61bea..32a263c 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi +++ b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi @@ -4,25 +4,38 @@ }; soc { - emac: ethernet@01c30000 { + syscon: syscon@1c00000 { + compatible = "allwinner,sun50i-a64-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + + emac: ethernet@1c30000 { compatible = "allwinner,sun50i-a64-emac"; - reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; - reg-names = "emac", "syscon"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; interrupts = ; + interrupt-names = "macirq"; resets = <&ccu RST_BUS_EMAC>; - reset-names = "ahb"; + reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "ahb"; + clock-names = "stmmaceth"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii"; - phy = <&phy1>; + phy-handle = <&ext_rgmii_phy>; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; }; }; @@ -30,21 +43,17 @@ &pio { rmii_pins: rmii_pins { - allwinner,pins = "PD10", "PD11", "PD13", "PD14", - "PD17", "PD18", "PD19", "PD20", - "PD22", "PD23"; - allwinner,function = "emac"; - allwinner,drive = <3>; - allwinner,pull = <0>; + pins = "PD10", "PD11", "PD13", "PD14", "PD17", + "PD18", "PD19", "PD20", "PD22", "PD23"; + function = "emac"; + drive-strength = <40>; }; rgmii_pins: rgmii_pins { - allwinner,pins = "PD8", "PD9", "PD10", "PD11", - "PD12", "PD13", "PD15", - "PD16", "PD17", "PD18", "PD19", - "PD20", "PD21", "PD22", "PD23"; - allwinner,function = "emac"; - allwinner,drive = <3>; - allwinner,pull = <0>; + pins = "PD8", "PD9", "PD10", "PD11", "PD12", + "PD13", "PD15", "PD16", "PD17", "PD18", + "PD19", "PD20", "PD21", "PD22", "PD23"; + function = "emac"; + drive-strength = <40>; }; }; diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts index 780d59a..d1c347d 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts @@ -108,10 +108,13 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_rgmii_pins>; phy-mode = "rgmii"; - phy = <&phy1>; + phy-handle = <&ext_rgmii_phy>; status = "okay"; +}; - phy1: ethernet-phy@1 { +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index ea50dda..ffd2148 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -289,6 +289,23 @@ function = "uart1"; }; + nand_pins_a: nand-base0@0 { + pins = "PC0", "PC1", "PC2", "PC5", + "PC8", "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", "PC15"; + function = "nand0"; + }; + + nand_cs0_pins_a: nand-cs@0 { + pins = "PC4"; + function = "nand0"; + }; + + nand_rb0_pins_a: nand-rb@0 { + pins = "PC6"; + function = "nand0"; + }; + mmc0_pins_a: mmc0@0 { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts index 20d489c..e0efcb3 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts @@ -100,14 +100,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &mmc0 { diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts index 97b993f..c8fd69f 100644 --- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -125,15 +125,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts index 5113059..78f6c24 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts @@ -48,12 +48,8 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index caa1a69..d97fdac 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -55,6 +55,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &rtl8189; }; @@ -110,14 +111,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts index 8df5c74..adab1cb 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts @@ -53,6 +53,7 @@ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -95,14 +96,10 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &mmc0 { diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index b8340f7..afba264 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -53,6 +53,7 @@ compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -167,12 +168,8 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&int_mii_phy>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index e7079b2..136e441 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -82,7 +82,13 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-mode = "rgmii"; - /delete-property/allwinner,use-internal-phy; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; }; &mmc2 { diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts index f97b040..51aaf49 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts @@ -69,8 +69,15 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; - /delete-property/allwinner,use-internal-phy; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; &pio { diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index afa6079..d9d31fa 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -144,9 +144,10 @@ #size-cells = <1>; ranges; - syscon: syscon@01c00000 { - compatible = "allwinner,sun8i-h3-syscon","syscon"; - reg = <0x01c00000 0x34>; + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; }; dma: dma-controller@01c02000 { @@ -339,15 +340,12 @@ interrupt-controller; #interrupt-cells = <3>; - emac_rgmii_pins: emac0@0 { - allwinner,pins = "PD0", "PD1", "PD2", "PD3", - "PD4", "PD5", "PD7", - "PD8", "PD9", "PD10", - "PD12", "PD13", "PD15", - "PD16", "PD17"; - allwinner,function = "emac"; - allwinner,drive = ; - allwinner,pull = ; + emac_rgmii_pins: emac0 { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", "PD16", "PD17"; + function = "emac"; + drive-strength = <40>; }; mmc0_pins_a: mmc0@0 { @@ -466,16 +464,51 @@ emac: ethernet@1c30000 { compatible = "allwinner,sun8i-h3-emac"; - reg = <0x01c30000 0x104>, <0x01c00030 0x4>; - reg-names = "emac", "syscon"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; interrupts = ; - resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>; - reset-names = "ahb", "ephy"; - clocks = <&ccu CLK_BUS_EMAC>, <&ccu CLK_BUS_EPHY>; - clock-names = "ahb", "ephy"; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + /* Only one MDIO is usable at the time */ + internal_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + + external_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; gic: interrupt-controller@01c81000 { diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts index dce688e..72a8505 100644 --- a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts +++ b/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts @@ -61,3 +61,17 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + status = "okay"; + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + allwinner,rb = <0>; + nand-ecc-mode = "hw"; + }; +}; diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index d328df9..d35aa47 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -192,6 +192,7 @@ struct sunxi_ccm_reg { #define ATB_DIV_1 0 #define ATB_DIV_2 1 #define ATB_DIV_4 2 +#define AHB_DIV_1 0 #define CPU_CLK_SRC_OSC24M 1 #define CPU_CLK_SRC_PLL1 2 @@ -317,6 +318,11 @@ struct sunxi_ccm_reg { #define AHB_GATE_OFFSET_LCD0 3 #endif +#define CCM_NAND_CTRL_M(x) ((x) - 1) +#define CCM_NAND_CTRL_N(x) ((x) << 16) +#define CCM_NAND_CTRL_PLL6 (0x1 << 24) +#define CCM_NAND_CTRL_ENABLE (0x1 << 31) + #define CCM_MMC_CTRL_M(x) ((x) - 1) #define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8) #define CCM_MMC_CTRL_N(x) ((x) << 16) diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 index 5a363d2..df1dbc8 100644 --- a/board/sunxi/README.sunxi64 +++ b/board/sunxi/README.sunxi64 @@ -38,6 +38,12 @@ the root of your U-Boot build directory (or create a symbolic link). $ export BL31=/src/arm-trusted-firmware/build/sun50iw1p1/debug/bl31.bin (adjust the actual path accordingly) +If you run into size issues with the resulting U-Boot image file, it might +help to use a release build, by using "DEBUG=0" when building bl31.bin. +As sometimes the ATF build process is a bit picky about the toolchain used, +or if you can't be bothered with building ATF, there are known working +binaries in the firmware repository[3], purely for convenience reasons. + SPL/U-Boot ------------ Both U-Boot proper and the SPL are using the 64-bit mode. As the boot ROM diff --git a/board/sunxi/board.c b/board/sunxi/board.c index e08e22f..322dd9e 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -286,10 +286,9 @@ static void nand_clock_setup(void) (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; setbits_le32(&ccm->ahb_gate0, (CLK_GATE_OPEN << AHB_GATE_OFFSET_NAND0)); -#ifdef CONFIG_MACH_SUN9I - setbits_le32(&ccm->ahb_gate1, (1 << AHB_GATE_OFFSET_DMA)); -#else - setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_DMA)); +#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I || \ + defined CONFIG_MACH_SUN9I || defined CONFIG_MACH_SUN50I + setbits_le32(&ccm->ahb_reset0_cfg, (1 << AHB_GATE_OFFSET_NAND0)); #endif setbits_le32(&ccm->nand0_clk_cfg, CCM_NAND_CTRL_ENABLE | AHB_DIV_1); } diff --git a/cmd/Kconfig b/cmd/Kconfig index 136836d..27086df 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -426,7 +426,6 @@ menu "Memory commands" config CMD_CRC32 bool "crc32" select HASH - default n if ARCH_SUNXI default y help Compute CRC32. @@ -568,7 +567,6 @@ config CMD_LZMADEC config CMD_UNZIP bool "unzip" - default n if ARCH_SUNXI default y if CMD_BOOTI help Uncompress a zip-compressed memory region. @@ -780,14 +778,12 @@ config CMD_I2C config CMD_LOADB bool "loadb" - default n if ARCH_SUNXI default y help Load a binary file over serial line. config CMD_LOADS bool "loads" - default n if ARCH_SUNXI default y help Load an S-Record file over serial line @@ -1187,7 +1183,6 @@ config CMD_GETTIME # TODO: rename to CMD_SLEEP config CMD_MISC bool "sleep" - default n if ARCH_SUNXI default y help Delay execution for some time diff --git a/common/spl/spl.c b/common/spl/spl.c index b1ce56d..61d3071 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -127,8 +127,14 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image) ulong u_boot_pos = binman_sym(ulong, u_boot_any, pos); spl_image->size = CONFIG_SYS_MONITOR_LEN; - if (u_boot_pos != BINMAN_SYM_MISSING) { - /* biman does not support separate entry addresses at present */ + + /* + * Binman error cases: address of the end of the previous region or the + * start of the image's entry area (usually 0) if there is no previous + * region. + */ + if (u_boot_pos && u_boot_pos != BINMAN_SYM_MISSING) { + /* Binman does not support separated entry addresses */ spl_image->entry_point = u_boot_pos; spl_image->load_addr = u_boot_pos; } else { diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig index 60dcaa7..2e204d5 100644 --- a/configs/CHIP_pro_defconfig +++ b/configs/CHIP_pro_defconfig @@ -1,11 +1,12 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y CONFIG_USB0_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-gr8-chip-pro" -CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BLOCK_SIZE=0x40000,SYS_NAND_PAGE_SIZE=4096,SYS_NAND_OOBSIZE=256" +CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 +CONFIG_SYS_NAND_PAGE_SIZE=0x1000 +CONFIG_SYS_NAND_OOBSIZE=0x100 CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set @@ -16,7 +17,6 @@ CONFIG_ENV_UBI_PART="UBI" CONFIG_ENV_UBI_VOLUME="uboot-env" # CONFIG_MMC is not set CONFIG_NAND=y -CONFIG_NAND_SUNXI=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 CONFIG_CONS_INDEX=2 diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig index 31d38af..62bee97 100644 --- a/configs/Nintendo_NES_Classic_Edition_defconfig +++ b/configs/Nintendo_NES_Classic_Edition_defconfig @@ -9,6 +9,10 @@ CONFIG_AXP_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic-edition" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 +CONFIG_SYS_NAND_PAGE_SIZE=0x800 +CONFIG_SYS_NAND_OOBSIZE=0x40 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index e98740a..c512c18 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -9,6 +9,7 @@ CONFIG_SPL=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 3cf01b6..ea6f359 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -354,12 +354,15 @@ static const struct udevice_id sunxi_gpio_ids[] = { ID("allwinner,sun8i-a83t-pinctrl", a_all), ID("allwinner,sun8i-h3-pinctrl", a_all), ID("allwinner,sun8i-r40-pinctrl", a_all), + ID("allwinner,sun8i-v3s-pinctrl", a_all), ID("allwinner,sun9i-a80-pinctrl", a_all), + ID("allwinner,sun50i-a64-pinctrl", a_all), ID("allwinner,sun6i-a31-r-pinctrl", l_2), ID("allwinner,sun8i-a23-r-pinctrl", l_1), ID("allwinner,sun8i-a83t-r-pinctrl", l_1), ID("allwinner,sun8i-h3-r-pinctrl", l_1), ID("allwinner,sun9i-a80-r-pinctrl", l_3), + ID("allwinner,sun50i-a64-r-pinctrl", l_1), { } }; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a820af6..94fbf89 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -95,9 +95,11 @@ config NAND_PXA3XX config NAND_SUNXI bool "Support for NAND on Allwinner SoCs" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I + default ARCH_SUNXI + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I select SYS_NAND_SELF_INIT select SYS_NAND_U_BOOT_LOCATIONS + select SPL_NAND_SUPPORT imply CMD_NAND ---help--- Enable support for NAND. This option enables the standard and @@ -166,6 +168,28 @@ config NAND_ZYNQ_USE_BOOTLOADER1_TIMINGS comment "Generic NAND options" +config SYS_NAND_BLOCK_SIZE + hex "NAND chip eraseblock size" + depends on ARCH_SUNXI + help + Number of data bytes in one eraseblock for the NAND chip on the + board. This is the multiple of NAND_PAGE_SIZE and the number of + pages. + +config SYS_NAND_PAGE_SIZE + hex "NAND chip page size" + depends on ARCH_SUNXI + help + Number of data bytes in one page for the NAND chip on the + board, not including the OOB area. + +config SYS_NAND_OOBSIZE + hex "NAND chip OOB size" + depends on ARCH_SUNXI + help + Number of bytes in the Out-Of-Band area for the NAND chip on + the board. + # Enhance depends when converting drivers to Kconfig which use this config # option (mxc_nand, ndfc, omap_gpmc). config SYS_NAND_BUSWIDTH_16BIT diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 532e03c..37160aa 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1407,8 +1407,14 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, /* Add ECC info retrieval from DT */ for (i = 0; i < ARRAY_SIZE(strengths); i++) { - if (ecc->strength <= strengths[i]) + if (ecc->strength <= strengths[i]) { + /* + * Update ecc->strength value with the actual strength + * that will be used by the ECC engine. + */ + ecc->strength = strengths[i]; break; + } } if (i >= ARRAY_SIZE(strengths)) { diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c index eed4472..7241e9a 100644 --- a/drivers/mtd/nand/sunxi_nand_spl.c +++ b/drivers/mtd/nand/sunxi_nand_spl.c @@ -10,6 +10,7 @@ #include #include #include +#include /* registers */ #define NFC_CTL 0x00000000 @@ -55,7 +56,7 @@ #define NFC_ADDR_NUM_OFFSET 16 -#define NFC_SEND_ADR (1 << 19) +#define NFC_SEND_ADDR (1 << 19) #define NFC_ACCESS_DIR (1 << 20) #define NFC_DATA_TRANS (1 << 21) #define NFC_SEND_CMD1 (1 << 22) @@ -67,10 +68,12 @@ #define NFC_SEND_CMD3 (1 << 28) #define NFC_SEND_CMD4 (1 << 29) #define NFC_RAW_CMD (0 << 30) +#define NFC_ECC_CMD (1 << 30) #define NFC_PAGE_CMD (2 << 30) #define NFC_ST_CMD_INT_FLAG (1 << 1) #define NFC_ST_DMA_INT_FLAG (1 << 2) +#define NFC_ST_CMD_FIFO_STAT (1 << 3) #define NFC_READ_CMD_OFFSET 0 #define NFC_RANDOM_READ_CMD0_OFFSET 8 @@ -80,22 +83,6 @@ #define NFC_CMD_RNDOUT 0x05 #define NFC_CMD_READSTART 0x30 -#define SUNXI_DMA_CFG_REG0 0x300 -#define SUNXI_DMA_SRC_START_ADDR_REG0 0x304 -#define SUNXI_DMA_DEST_START_ADDRR_REG0 0x308 -#define SUNXI_DMA_DDMA_BC_REG0 0x30C -#define SUNXI_DMA_DDMA_PARA_REG0 0x318 - -#define SUNXI_DMA_DDMA_CFG_REG_LOADING (1 << 31) -#define SUNXI_DMA_DDMA_CFG_REG_DMA_DEST_DATA_WIDTH_32 (2 << 25) -#define SUNXI_DMA_DDMA_CFG_REG_DDMA_DST_DRQ_TYPE_DRAM (1 << 16) -#define SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_DATA_WIDTH_32 (2 << 9) -#define SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_ADDR_MODE_IO (1 << 5) -#define SUNXI_DMA_DDMA_CFG_REG_DDMA_SRC_DRQ_TYPE_NFC (3 << 0) - -#define SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC (0x0F << 0) -#define SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE (0x7F << 8) - struct nfc_config { int page_size; int ecc_strength; @@ -155,6 +142,42 @@ static inline int check_value_negated(int offset, int unexpected_bits, return check_value_inner(offset, unexpected_bits, timeout_us, 1); } +static int nand_wait_cmd_fifo_empty(void) +{ + if (!check_value_negated(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_FIFO_STAT, + DEFAULT_TIMEOUT_US)) { + printf("nand: timeout waiting for empty cmd FIFO\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int nand_wait_int(void) +{ + if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG, + DEFAULT_TIMEOUT_US)) { + printf("nand: timeout waiting for interruption\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int nand_exec_cmd(u32 cmd) +{ + int ret; + + ret = nand_wait_cmd_fifo_empty(); + if (ret) + return ret; + + writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST); + writel(cmd, SUNXI_NFC_BASE + NFC_CMD); + + return nand_wait_int(); +} + void nand_init(void) { uint32_t val; @@ -172,22 +195,15 @@ void nand_init(void) } /* reset NAND */ - writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST); - writel(NFC_SEND_CMD1 | NFC_WAIT_FLAG | NAND_CMD_RESET, - SUNXI_NFC_BASE + NFC_CMD); - - if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG, - DEFAULT_TIMEOUT_US)) { - printf("Error timeout waiting for nand reset\n"); - return; - } - writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST); + nand_exec_cmd(NFC_SEND_CMD1 | NFC_WAIT_FLAG | NAND_CMD_RESET); } static void nand_apply_config(const struct nfc_config *conf) { u32 val; + nand_wait_cmd_fifo_empty(); + val = readl(SUNXI_NFC_BASE + NFC_CTL); val &= ~NFC_CTL_PAGE_SIZE_MASK; writel(val | NFC_CTL_RAM_METHOD | NFC_CTL_PAGE_SIZE(conf->page_size), @@ -206,128 +222,111 @@ static int nand_load_page(const struct nfc_config *conf, u32 offs) SUNXI_NFC_BASE + NFC_RCMD_SET); writel(((page & 0xFFFF) << 16), SUNXI_NFC_BASE + NFC_ADDR_LOW); writel((page >> 16) & 0xFF, SUNXI_NFC_BASE + NFC_ADDR_HIGH); - writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST); - writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD | NFC_WAIT_FLAG | - ((conf->addr_cycles - 1) << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADR, - SUNXI_NFC_BASE + NFC_CMD); - - if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG, - DEFAULT_TIMEOUT_US)) { - printf("Error while initializing dma interrupt\n"); - return -EIO; - } - return 0; + return nand_exec_cmd(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD | + NFC_SEND_ADDR | NFC_WAIT_FLAG | + ((conf->addr_cycles - 1) << NFC_ADDR_NUM_OFFSET)); } -static int nand_reset_column(void) +static int nand_change_column(u16 column) { + int ret; + writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET) | (NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET) | (NFC_CMD_RNDOUTSTART << NFC_READ_CMD_OFFSET), SUNXI_NFC_BASE + NFC_RCMD_SET); - writel(0, SUNXI_NFC_BASE + NFC_ADDR_LOW); - writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD | - (1 << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADR | NFC_CMD_RNDOUT, - SUNXI_NFC_BASE + NFC_CMD); + writel(column, SUNXI_NFC_BASE + NFC_ADDR_LOW); - if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG, - DEFAULT_TIMEOUT_US)) { - printf("Error while initializing dma interrupt\n"); - return -1; - } + ret = nand_exec_cmd(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD | + (1 << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADDR | + NFC_CMD_RNDOUT); + if (ret) + return ret; + + /* Ensure tCCS has passed before reading data */ + udelay(1); return 0; } +static const int ecc_bytes[] = {32, 46, 54, 60, 74, 88, 102, 110, 116}; + static int nand_read_page(const struct nfc_config *conf, u32 offs, void *dest, int len) { - dma_addr_t dst = (dma_addr_t)dest; int nsectors = len / conf->ecc_size; u16 rand_seed = 0; - u32 val; - int page; - - page = offs / conf->page_size; + int oob_chunk_sz = ecc_bytes[conf->ecc_strength]; + int page = offs / conf->page_size; + u32 ecc_st; + int i; if (offs % conf->page_size || len % conf->ecc_size || len > conf->page_size || len < 0) return -EINVAL; - /* clear ecc status */ - writel(0, SUNXI_NFC_BASE + NFC_ECC_ST); - /* Choose correct seed if randomized */ if (conf->randomize) rand_seed = random_seed[page % conf->nseeds]; - writel((rand_seed << 16) | (conf->ecc_strength << 12) | - (conf->randomize ? NFC_ECC_RANDOM_EN : 0) | - (conf->ecc_size == 512 ? NFC_ECC_BLOCK_SIZE : 0) | - NFC_ECC_EN | NFC_ECC_PIPELINE | NFC_ECC_EXCEPTION, - SUNXI_NFC_BASE + NFC_ECC_CTL); - - flush_dcache_range(dst, ALIGN(dst + conf->ecc_size, ARCH_DMA_MINALIGN)); - - /* SUNXI_DMA */ - writel(0x0, SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0); /* clr dma cmd */ - /* read from REG_IO_DATA */ - writel(SUNXI_NFC_BASE + NFC_IO_DATA, - SUNXI_DMA_BASE + SUNXI_DMA_SRC_START_ADDR_REG0); - /* read to RAM */ - writel(dst, SUNXI_DMA_BASE + SUNXI_DMA_DEST_START_ADDRR_REG0); - writel(SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC | - SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE, - SUNXI_DMA_BASE + SUNXI_DMA_DDMA_PARA_REG0); - writel(len, SUNXI_DMA_BASE + SUNXI_DMA_DDMA_BC_REG0); - writel(SUNXI_DMA_DDMA_CFG_REG_LOADING | - SUNXI_DMA_DDMA_CFG_REG_DMA_DEST_DATA_WIDTH_32 | - SUNXI_DMA_DDMA_CFG_REG_DDMA_DST_DRQ_TYPE_DRAM | - SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_DATA_WIDTH_32 | - SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_ADDR_MODE_IO | - SUNXI_DMA_DDMA_CFG_REG_DDMA_SRC_DRQ_TYPE_NFC, - SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0); - - writel(nsectors, SUNXI_NFC_BASE + NFC_SECTOR_NUM); - writel(NFC_ST_DMA_INT_FLAG, SUNXI_NFC_BASE + NFC_ST); - writel(NFC_DATA_TRANS | NFC_PAGE_CMD | NFC_DATA_SWAP_METHOD, - SUNXI_NFC_BASE + NFC_CMD); - - if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_DMA_INT_FLAG, - DEFAULT_TIMEOUT_US)) { - printf("Error while initializing dma interrupt\n"); - return -EIO; - } - writel(NFC_ST_DMA_INT_FLAG, SUNXI_NFC_BASE + NFC_ST); + /* Retrieve data from SRAM (PIO) */ + for (i = 0; i < nsectors; i++) { + int data_off = i * conf->ecc_size; + int oob_off = conf->page_size + (i * oob_chunk_sz); + u8 *data = dest + data_off; + + /* Clear ECC status and restart ECC engine */ + writel(0, SUNXI_NFC_BASE + NFC_ECC_ST); + writel((rand_seed << 16) | (conf->ecc_strength << 12) | + (conf->randomize ? NFC_ECC_RANDOM_EN : 0) | + (conf->ecc_size == 512 ? NFC_ECC_BLOCK_SIZE : 0) | + NFC_ECC_EN | NFC_ECC_EXCEPTION, + SUNXI_NFC_BASE + NFC_ECC_CTL); + + /* Move the data in SRAM */ + nand_change_column(data_off); + writel(conf->ecc_size, SUNXI_NFC_BASE + NFC_CNT); + nand_exec_cmd(NFC_DATA_TRANS); - if (!check_value_negated(SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0, - SUNXI_DMA_DDMA_CFG_REG_LOADING, - DEFAULT_TIMEOUT_US)) { - printf("Error while waiting for dma transfer to finish\n"); - return -EIO; - } + /* + * Let the ECC engine consume the ECC bytes and possibly correct + * the data. + */ + nand_change_column(oob_off); + nand_exec_cmd(NFC_DATA_TRANS | NFC_ECC_CMD); + + /* Get the ECC status */ + ecc_st = readl(SUNXI_NFC_BASE + NFC_ECC_ST); + + /* ECC error detected. */ + if (ecc_st & 0xffff) + return -EIO; + + /* + * Return 1 if the first chunk is empty (needed for + * configuration detection). + */ + if (!i && (ecc_st & 0x10000)) + return 1; - invalidate_dcache_range(dst, - ALIGN(dst + conf->ecc_size, ARCH_DMA_MINALIGN)); + /* Retrieve the data from SRAM */ + memcpy_fromio(data, SUNXI_NFC_BASE + NFC_RAM0_BASE, + conf->ecc_size); - val = readl(SUNXI_NFC_BASE + NFC_ECC_ST); + /* Stop the ECC engine */ + writel(readl(SUNXI_NFC_BASE + NFC_ECC_CTL) & ~NFC_ECC_EN, + SUNXI_NFC_BASE + NFC_ECC_CTL); - /* ECC error detected. */ - if (val & 0xffff) - return -EIO; + if (data_off + conf->ecc_size >= len) + break; + } - /* - * Return 1 if the page is empty. - * We consider the page as empty if the first ECC block is marked - * empty. - */ - return (val & 0x10000) ? 1 : 0; + return 0; } static int nand_max_ecc_strength(struct nfc_config *conf) { - static const int ecc_bytes[] = { 32, 46, 54, 60, 74, 88, 102, 110, 116 }; int max_oobsize, max_ecc_bytes; int nsectors = conf->page_size / conf->ecc_size; int i; @@ -393,7 +392,7 @@ static int nand_detect_ecc_config(struct nfc_config *conf, u32 offs, conf->ecc_strength >= 0; conf->ecc_strength--) { conf->randomize = false; - if (nand_reset_column()) + if (nand_change_column(0)) return -EIO; /* @@ -413,7 +412,7 @@ static int nand_detect_ecc_config(struct nfc_config *conf, u32 offs, conf->randomize = true; conf->nseeds = ARRAY_SIZE(random_seed); do { - if (nand_reset_column()) + if (nand_change_column(0)) return -EIO; if (!nand_read_page(conf, offs, dest, @@ -475,11 +474,12 @@ static int nand_detect_config(struct nfc_config *conf, u32 offs, void *dest) static int nand_read_buffer(struct nfc_config *conf, uint32_t offs, unsigned int size, void *dest) { - int first_seed, page, ret; + int first_seed = 0, page, ret; size = ALIGN(size, conf->page_size); page = offs / conf->page_size; - first_seed = page % conf->nseeds; + if (conf->randomize) + first_seed = page % conf->nseeds; for (; size; size -= conf->page_size) { if (nand_load_page(conf, offs)) @@ -504,7 +504,7 @@ static int nand_read_buffer(struct nfc_config *conf, uint32_t offs, /* Try to adjust ->nseeds and read the page again... */ conf->nseeds = cur_seed; - if (nand_reset_column()) + if (nand_change_column(0)) return -EIO; /* ... it still fails => it's a real corruption. */ diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index be43472..b6e5daf 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -21,6 +21,7 @@ #include #include #include +#include #ifdef CONFIG_DM_GPIO #include #endif @@ -278,7 +279,7 @@ static int sun8i_emac_set_syscon(struct emac_eth_dev *priv) int ret; u32 reg; - reg = readl(priv->sysctl_reg); + reg = readl(priv->sysctl_reg + 0x30); if (priv->variant == H3_EMAC) { ret = sun8i_emac_set_syscon_ephy(priv, ®); @@ -309,7 +310,7 @@ static int sun8i_emac_set_syscon(struct emac_eth_dev *priv) return -EINVAL; } - writel(reg, priv->sysctl_reg); + writel(reg, priv->sysctl_reg + 0x30); return 0; } @@ -455,7 +456,7 @@ static int parse_phy_pins(struct udevice *dev) { int offset; const char *pin_name; - int drive, pull, i; + int drive, pull = SUN4I_PINCTRL_NO_PULL, i; offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev), "pinctrl-0"); @@ -465,30 +466,44 @@ static int parse_phy_pins(struct udevice *dev) } drive = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0, - "allwinner,drive", 4); - pull = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0, - "allwinner,pull", 0); + "drive-strength", ~0); + if (drive != ~0) { + if (drive <= 10) + drive = SUN4I_PINCTRL_10_MA; + else if (drive <= 20) + drive = SUN4I_PINCTRL_20_MA; + else if (drive <= 30) + drive = SUN4I_PINCTRL_30_MA; + else + drive = SUN4I_PINCTRL_40_MA; + } + + if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-up", NULL)) + pull = SUN4I_PINCTRL_PULL_UP; + else if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-down", NULL)) + pull = SUN4I_PINCTRL_PULL_DOWN; + for (i = 0; ; i++) { int pin; pin_name = fdt_stringlist_get(gd->fdt_blob, offset, - "allwinner,pins", i, NULL); + "pins", i, NULL); if (!pin_name) break; - if (pin_name[0] != 'P') - continue; - pin = (pin_name[1] - 'A') << 5; - if (pin >= 26 << 5) + + pin = sunxi_name_to_gpio(pin_name); + if (pin < 0) continue; - pin += simple_strtol(&pin_name[2], NULL, 10); sunxi_gpio_set_cfgpin(pin, SUN8I_GPD8_GMAC); - sunxi_gpio_set_drv(pin, drive); - sunxi_gpio_set_pull(pin, pull); + if (drive != ~0) + sunxi_gpio_set_drv(pin, drive); + if (pull != ~0) + sunxi_gpio_set_pull(pin, pull); } if (!i) { - printf("WARNING: emac: cannot find allwinner,pins property\n"); + printf("WARNING: emac: cannot find pins property\n"); return -2; } @@ -772,6 +787,7 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) struct eth_pdata *pdata = &sun8i_pdata->eth_pdata; struct emac_eth_dev *priv = dev_get_priv(dev); const char *phy_mode; + const fdt32_t *reg; int node = dev_of_offset(dev); int offset = 0; #ifdef CONFIG_DM_GPIO @@ -779,18 +795,40 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) int ret = 0; #endif - pdata->iobase = devfdt_get_addr_name(dev, "emac"); - priv->sysctl_reg = devfdt_get_addr_name(dev, "syscon"); + pdata->iobase = devfdt_get_addr(dev); + if (pdata->iobase == FDT_ADDR_T_NONE) { + debug("%s: Cannot find MAC base address\n", __func__); + return -EINVAL; + } + + offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon"); + if (offset < 0) { + debug("%s: cannot find syscon node\n", __func__); + return -EINVAL; + } + reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL); + if (!reg) { + debug("%s: cannot find reg property in syscon node\n", + __func__); + return -EINVAL; + } + priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob, + offset, reg); + if (priv->sysctl_reg == FDT_ADDR_T_NONE) { + debug("%s: Cannot find syscon base address\n", __func__); + return -EINVAL; + } pdata->phy_interface = -1; priv->phyaddr = -1; priv->use_internal_phy = false; - offset = fdtdec_lookup_phandle(gd->fdt_blob, node, - "phy"); - if (offset > 0) - priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", - -1); + offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle"); + if (offset < 0) { + debug("%s: Cannot find PHY address\n", __func__); + return -EINVAL; + } + priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1); phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL); @@ -812,8 +850,11 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) } if (priv->variant == H3_EMAC) { - if (fdt_getprop(gd->fdt_blob, node, - "allwinner,use-internal-phy", NULL)) + int parent = fdt_parent_offset(gd->fdt_blob, offset); + + if (parent >= 0 && + !fdt_node_check_compatible(gd->fdt_blob, parent, + "allwinner,sun8i-h3-mdio-internal")) priv->use_internal_phy = true; } diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 2fc0def..45a105d 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -38,7 +38,6 @@ config BACKLIGHT_GPIO config VIDEO_BPP8 bool "Support 8-bit-per-pixel displays" depends on DM_VIDEO - default n if ARCH_SUNXI default y if DM_VIDEO help Support drawing text and bitmaps onto a 8-bit-per-pixel display. @@ -49,7 +48,6 @@ config VIDEO_BPP8 config VIDEO_BPP16 bool "Support 16-bit-per-pixel displays" depends on DM_VIDEO - default n if ARCH_SUNXI default y if DM_VIDEO help Support drawing text and bitmaps onto a 16-bit-per-pixel display. diff --git a/env/Kconfig b/env/Kconfig index 3554872..3bc1a35 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -152,7 +152,6 @@ config ENV_IS_IN_MMC bool "Environment in an MMC device" depends on !CHAIN_OF_TRUST depends on MMC - default y if ARCH_SUNXI default y if ARCH_EXYNOS4 default y if MX6SX || MX7D default y if TEGRA30 || TEGRA124 diff --git a/lib/Kconfig b/lib/Kconfig index a4029a6..436b90f 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -66,7 +66,6 @@ config PANIC_HANG config REGEX bool "Enable regular expression support" - default n if ARCH_SUNXI default y if NET help If this variable is defined, U-Boot is linked against the