diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index da6421f..c20a0cc 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -26,6 +26,16 @@ config DM_PCI_COMPAT
measure when porting a board to use driver model for PCI. Once the
board is fully supported, this option should be disabled.
+config PCI_AARDVARK
+ bool "Enable Aardvark PCIe driver"
+ default n
+ depends on DM_PCI
+ depends on ARMADA_3700
+ help
+ Say Y here if you want to enable PCIe controller support on
+ Armada37x0 SoCs. The PCIe controller on Armada37x0 is based on
+ Aardvark hardware.
+
config PCI_PNP
bool "Enable Plug & Play support for PCI"
depends on PCI || DM_PCI
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 8fbab46..40ebc06 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SH4_PCI) += pci_sh4.o
obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
obj-$(CONFIG_PCI_TEGRA) += pci_tegra.o
+obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
obj-$(CONFIG_PCIE_DW_MVEBU) += pcie_dw_mvebu.o
obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape_fixup.o
diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
new file mode 100644
index 0000000..69a4d81
--- /dev/null
+++ b/drivers/pci/pci-aardvark.c
@@ -0,0 +1,690 @@
+/*
+ * ***************************************************************************
+ * Copyright (C) 2015 Marvell International Ltd.
+ * ***************************************************************************
+ * This program is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, either version 2 of the License, or any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ * ***************************************************************************
+ */
+/* pcie_advk.c
+ *
+ * Ported from Linux driver - driver/pci/host/pci-aardvark.c
+ *
+ * Author: Victor Gu
+ * Hezi Shahmoon
+ *
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+/* PCIe core registers */
+#define PCIE_CORE_CMD_STATUS_REG 0x4
+#define PCIE_CORE_CMD_IO_ACCESS_EN BIT(0)
+#define PCIE_CORE_CMD_MEM_ACCESS_EN BIT(1)
+#define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2)
+#define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
+#define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
+#define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
+#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
+#define PCIE_CORE_LINK_TRAINING BIT(5)
+#define PCIE_CORE_ERR_CAPCTL_REG 0x118
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN BIT(6)
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHECK BIT(7)
+#define PCIE_CORE_ERR_CAPCTL_ECRC_CHECK_RCV BIT(8)
+
+/* PIO registers base address and register offsets */
+#define PIO_BASE_ADDR 0x4000
+#define PIO_CTRL (PIO_BASE_ADDR + 0x0)
+#define PIO_CTRL_TYPE_MASK GENMASK(3, 0)
+#define PIO_CTRL_ADDR_WIN_DISABLE BIT(24)
+#define PIO_STAT (PIO_BASE_ADDR + 0x4)
+#define PIO_COMPLETION_STATUS_SHIFT 7
+#define PIO_COMPLETION_STATUS_MASK GENMASK(9, 7)
+#define PIO_COMPLETION_STATUS_OK 0
+#define PIO_COMPLETION_STATUS_UR 1
+#define PIO_COMPLETION_STATUS_CRS 2
+#define PIO_COMPLETION_STATUS_CA 4
+#define PIO_NON_POSTED_REQ BIT(10)
+#define PIO_ERR_STATUS BIT(11)
+#define PIO_ADDR_LS (PIO_BASE_ADDR + 0x8)
+#define PIO_ADDR_MS (PIO_BASE_ADDR + 0xc)
+#define PIO_WR_DATA (PIO_BASE_ADDR + 0x10)
+#define PIO_WR_DATA_STRB (PIO_BASE_ADDR + 0x14)
+#define PIO_RD_DATA (PIO_BASE_ADDR + 0x18)
+#define PIO_START (PIO_BASE_ADDR + 0x1c)
+#define PIO_ISR (PIO_BASE_ADDR + 0x20)
+
+/* Aardvark Control registers */
+#define CONTROL_BASE_ADDR 0x4800
+#define PCIE_CORE_CTRL0_REG (CONTROL_BASE_ADDR + 0x0)
+#define PCIE_GEN_SEL_MSK 0x3
+#define PCIE_GEN_SEL_SHIFT 0x0
+#define SPEED_GEN_1 0
+#define SPEED_GEN_2 1
+#define SPEED_GEN_3 2
+#define IS_RC_MSK 1
+#define IS_RC_SHIFT 2
+#define LANE_CNT_MSK 0x18
+#define LANE_CNT_SHIFT 0x3
+#define LANE_COUNT_1 (0 << LANE_CNT_SHIFT)
+#define LANE_COUNT_2 (1 << LANE_CNT_SHIFT)
+#define LANE_COUNT_4 (2 << LANE_CNT_SHIFT)
+#define LANE_COUNT_8 (3 << LANE_CNT_SHIFT)
+#define LINK_TRAINING_EN BIT(6)
+#define PCIE_CORE_CTRL2_REG (CONTROL_BASE_ADDR + 0x8)
+#define PCIE_CORE_CTRL2_RESERVED 0x7
+#define PCIE_CORE_CTRL2_TD_ENABLE BIT(4)
+#define PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE BIT(5)
+#define PCIE_CORE_CTRL2_ADDRWIN_MAP_ENABLE BIT(6)
+
+/* LMI registers base address and register offsets */
+#define LMI_BASE_ADDR 0x6000
+#define CFG_REG (LMI_BASE_ADDR + 0x0)
+#define LTSSM_SHIFT 24
+#define LTSSM_MASK 0x3f
+#define LTSSM_L0 0x10
+
+/* PCIe core controller registers */
+#define CTRL_CORE_BASE_ADDR 0x18000
+#define CTRL_CONFIG_REG (CTRL_CORE_BASE_ADDR + 0x0)
+#define CTRL_MODE_SHIFT 0x0
+#define CTRL_MODE_MASK 0x1
+#define PCIE_CORE_MODE_DIRECT 0x0
+#define PCIE_CORE_MODE_COMMAND 0x1
+
+/* Transaction types */
+#define PCIE_CONFIG_RD_TYPE0 0x8
+#define PCIE_CONFIG_RD_TYPE1 0x9
+#define PCIE_CONFIG_WR_TYPE0 0xa
+#define PCIE_CONFIG_WR_TYPE1 0xb
+
+/* PCI_BDF shifts 8bit, so we need extra 4bit shift */
+#define PCIE_BDF(dev) (dev << 4)
+#define PCIE_CONF_BUS(bus) (((bus) & 0xff) << 20)
+#define PCIE_CONF_DEV(dev) (((dev) & 0x1f) << 15)
+#define PCIE_CONF_FUNC(fun) (((fun) & 0x7) << 12)
+#define PCIE_CONF_REG(reg) ((reg) & 0xffc)
+#define PCIE_CONF_ADDR(bus, devfn, where) \
+ (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where))
+
+/* PCIe Retries & Timeout definitions */
+#define MAX_RETRIES 10
+#define PIO_WAIT_TIMEOUT 100
+#define LINK_WAIT_TIMEOUT 100000
+
+#define CFG_RD_UR_VAL 0xFFFFFFFF
+#define CFG_RD_CRS_VAL 0xFFFF0001
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * struct pcie_advk - Advk PCIe controller state
+ *
+ * @reg_base: The base address of the register space.
+ * @first_busno: This driver supports multiple PCIe controllers.
+ * first_busno stores the bus number of the PCIe root-port
+ * number which may vary depending on the PCIe setup
+ * (PEX switches etc).
+ * @device: The pointer to PCI uclass device.
+ */
+struct pcie_advk {
+ void *base;
+ int first_busno;
+ struct udevice *dev;
+};
+
+static inline void advk_writel(struct pcie_advk *pcie, uint val, uint reg)
+{
+ writel(val, pcie->base + reg);
+}
+
+static inline uint advk_readl(struct pcie_advk *pcie, uint reg)
+{
+ return readl(pcie->base + reg);
+}
+
+/**
+ * pcie_advk_addr_valid() - Check for valid bus address
+ *
+ * @bdf: The PCI device to access
+ * @first_busno: Bus number of the PCIe controller root complex
+ *
+ * Return: 1 on valid, 0 on invalid
+ */
+static int pcie_advk_addr_valid(pci_dev_t bdf, int first_busno)
+{
+ /*
+ * In PCIE-E only a single device (0) can exist
+ * on the local bus. Beyound the local bus, there might be
+ * a Switch and everything is possible.
+ */
+ if ((PCI_BUS(bdf) == first_busno) && (PCI_DEV(bdf) > 0))
+ return 0;
+
+ return 1;
+}
+
+/**
+ * pcie_advk_wait_pio() - Wait for PIO access to be accomplished
+ *
+ * @pcie: The PCI device to access
+ *
+ * Wait up to 1 micro second for PIO access to be accomplished.
+ *
+ * Return 1 (true) if PIO access is accomplished.
+ * Return 0 (false) if PIO access is timed out.
+ */
+static int pcie_advk_wait_pio(struct pcie_advk *pcie)
+{
+ uint start, isr;
+ uint count;
+
+ for (count = 0; count < MAX_RETRIES; count++) {
+ start = advk_readl(pcie, PIO_START);
+ isr = advk_readl(pcie, PIO_ISR);
+ if (!start && isr)
+ return 1;
+ /*
+ * Do not check the PIO state too frequently,
+ * 100us delay is appropriate.
+ */
+ udelay(PIO_WAIT_TIMEOUT);
+ }
+
+ dev_err(pcie->dev, "config read/write timed out\n");
+ return 0;
+}
+
+/**
+ * pcie_advk_check_pio_status() - Validate PIO status and get the read result
+ *
+ * @pcie: Pointer to the PCI bus
+ * @read: Read from or write to configuration space - true(read) false(write)
+ * @read_val: Pointer to the read result, only valid when read is true
+ *
+ */
+static int pcie_advk_check_pio_status(struct pcie_advk *pcie,
+ bool read,
+ uint *read_val)
+{
+ uint reg;
+ unsigned int status;
+ char *strcomp_status, *str_posted;
+
+ reg = advk_readl(pcie, PIO_STAT);
+ status = (reg & PIO_COMPLETION_STATUS_MASK) >>
+ PIO_COMPLETION_STATUS_SHIFT;
+
+ switch (status) {
+ case PIO_COMPLETION_STATUS_OK:
+ if (reg & PIO_ERR_STATUS) {
+ strcomp_status = "COMP_ERR";
+ break;
+ }
+ /* Get the read result */
+ if (read)
+ *read_val = advk_readl(pcie, PIO_RD_DATA);
+ /* No error */
+ strcomp_status = NULL;
+ break;
+ case PIO_COMPLETION_STATUS_UR:
+ if (read) {
+ /* For reading, UR is not an error status. */
+ *read_val = CFG_RD_UR_VAL;
+ strcomp_status = NULL;
+ } else {
+ strcomp_status = "UR";
+ }
+ break;
+ case PIO_COMPLETION_STATUS_CRS:
+ if (read) {
+ /* For reading, CRS is not an error status. */
+ *read_val = CFG_RD_CRS_VAL;
+ strcomp_status = NULL;
+ } else {
+ strcomp_status = "CRS";
+ }
+ break;
+ case PIO_COMPLETION_STATUS_CA:
+ strcomp_status = "CA";
+ break;
+ default:
+ strcomp_status = "Unknown";
+ break;
+ }
+
+ if (!strcomp_status)
+ return 0;
+
+ if (reg & PIO_NON_POSTED_REQ)
+ str_posted = "Non-posted";
+ else
+ str_posted = "Posted";
+
+ dev_err(pcie->dev, "%s PIO Response Status: %s, %#x @ %#x\n",
+ str_posted, strcomp_status, reg,
+ advk_readl(pcie, PIO_ADDR_LS));
+
+ return -EFAULT;
+}
+
+/**
+ * pcie_advk_read_config() - Read from configuration space
+ *
+ * @bus: Pointer to the PCI bus
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @valuep: A pointer at which to store the read value
+ * @size: Indicates the size of access to perform
+ *
+ * Read a value of size @size from offset @offset within the configuration
+ * space of the device identified by the bus, device & function numbers in @bdf
+ * on the PCI bus @bus.
+ *
+ * Return: 0 on success
+ */
+static int pcie_advk_read_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ struct pcie_advk *pcie = dev_get_priv(bus);
+ uint reg;
+ int ret;
+
+ dev_dbg(pcie->dev, "PCIE CFG read: (b,d,f)=(%2d,%2d,%2d) ",
+ PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
+
+ if (!pcie_advk_addr_valid(bdf, pcie->first_busno)) {
+ dev_dbg(pcie->dev, "- out of range\n");
+ *valuep = pci_get_ff(size);
+ return 0;
+ }
+
+ /* Start PIO */
+ advk_writel(pcie, 0, PIO_START);
+ advk_writel(pcie, 1, PIO_ISR);
+
+ /* Program the control register */
+ reg = advk_readl(pcie, PIO_CTRL);
+ reg &= ~PIO_CTRL_TYPE_MASK;
+ if (PCI_BUS(bdf) == pcie->first_busno)
+ reg |= PCIE_CONFIG_RD_TYPE0;
+ else
+ reg |= PCIE_CONFIG_RD_TYPE1;
+ advk_writel(pcie, reg, PIO_CTRL);
+
+ /* Program the address registers */
+ reg = PCIE_BDF(bdf) | PCIE_CONF_REG(offset);
+ advk_writel(pcie, reg, PIO_ADDR_LS);
+ advk_writel(pcie, 0, PIO_ADDR_MS);
+
+ /* Start the transfer */
+ advk_writel(pcie, 1, PIO_START);
+
+ if (!pcie_advk_wait_pio(pcie))
+ return -EINVAL;
+
+ /* Check PIO status and get the read result */
+ ret = pcie_advk_check_pio_status(pcie, true, ®);
+ if (ret)
+ return ret;
+
+ dev_dbg(pcie->dev, "(addr,size,val)=(0x%04x, %d, 0x%08x)\n",
+ offset, size, reg);
+ *valuep = pci_conv_32_to_size(reg, offset, size);
+
+ return 0;
+}
+
+/**
+ * pcie_calc_datastrobe() - Calculate data strobe
+ *
+ * @offset: The offset into the device's configuration space
+ * @size: Indicates the size of access to perform
+ *
+ * Calculate data strobe according to offset and size
+ *
+ */
+static uint pcie_calc_datastrobe(uint offset, enum pci_size_t size)
+{
+ uint bytes, data_strobe;
+
+ switch (size) {
+ case PCI_SIZE_8:
+ bytes = 1;
+ break;
+ case PCI_SIZE_16:
+ bytes = 2;
+ break;
+ default:
+ bytes = 4;
+ }
+
+ data_strobe = GENMASK(bytes - 1, 0) << (offset & 0x3);
+
+ return data_strobe;
+}
+
+/**
+ * pcie_advk_write_config() - Write to configuration space
+ *
+ * @bus: Pointer to the PCI bus
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @value: The value to write
+ * @size: Indicates the size of access to perform
+ *
+ * Write the value @value of size @size from offset @offset within the
+ * configuration space of the device identified by the bus, device & function
+ * numbers in @bdf on the PCI bus @bus.
+ *
+ * Return: 0 on success
+ */
+static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct pcie_advk *pcie = dev_get_priv(bus);
+ uint reg;
+
+ dev_dbg(pcie->dev, "PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
+ PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
+ dev_dbg(pcie->dev, "(addr,size,val)=(0x%04x, %d, 0x%08lx)\n",
+ offset, size, value);
+
+ if (!pcie_advk_addr_valid(bdf, pcie->first_busno)) {
+ dev_dbg(pcie->dev, "- out of range\n");
+ return 0;
+ }
+
+ /* Start PIO */
+ advk_writel(pcie, 0, PIO_START);
+ advk_writel(pcie, 1, PIO_ISR);
+
+ /* Program the control register */
+ reg = advk_readl(pcie, PIO_CTRL);
+ reg &= ~PIO_CTRL_TYPE_MASK;
+ if (PCI_BUS(bdf) == pcie->first_busno)
+ reg |= PCIE_CONFIG_WR_TYPE0;
+ else
+ reg |= PCIE_CONFIG_WR_TYPE1;
+ advk_writel(pcie, reg, PIO_CTRL);
+
+ /* Program the address registers */
+ reg = PCIE_BDF(bdf) | PCIE_CONF_REG(offset);
+ advk_writel(pcie, reg, PIO_ADDR_LS);
+ advk_writel(pcie, 0, PIO_ADDR_MS);
+ dev_dbg(pcie->dev, "\tPIO req. - addr = 0x%08x\n", reg);
+
+ /* Program the data register */
+ reg = pci_conv_size_to_32(0, value, offset, size);
+ advk_writel(pcie, reg, PIO_WR_DATA);
+ dev_dbg(pcie->dev, "\tPIO req. - val = 0x%08x\n", reg);
+
+ /* Program the data strobe */
+ reg = pcie_calc_datastrobe(offset, size);
+ advk_writel(pcie, reg, PIO_WR_DATA_STRB);
+ dev_dbg(pcie->dev, "\tPIO req. - strb = 0x%02x\n", reg);
+
+ /* Start the transfer */
+ advk_writel(pcie, 1, PIO_START);
+
+ if (!pcie_advk_wait_pio(pcie)) {
+ dev_dbg(pcie->dev, "- wait pio timeout\n");
+ return -EINVAL;
+ }
+
+ /* Check PIO status */
+ pcie_advk_check_pio_status(pcie, false, ®);
+
+ return 0;
+}
+
+/**
+ * pcie_advk_link_up() - Check if PCIe link is up or not
+ *
+ * @pcie: The PCI device to access
+ *
+ * Return 1 (true) on link up.
+ * Return 0 (false) on link down.
+ */
+static int pcie_advk_link_up(struct pcie_advk *pcie)
+{
+ u32 val, ltssm_state;
+
+ val = advk_readl(pcie, CFG_REG);
+ ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
+ return ltssm_state >= LTSSM_L0;
+}
+
+/**
+ * pcie_advk_wait_for_link() - Wait for link training to be accomplished
+ *
+ * @pcie: The PCI device to access
+ *
+ * Wait up to 1 second for link training to be accomplished.
+ *
+ * Return 1 (true) if link training ends up with link up success.
+ * Return 0 (false) if link training ends up with link up failure.
+ */
+static int pcie_advk_wait_for_link(struct pcie_advk *pcie)
+{
+ int retries;
+
+ /* check if the link is up or not */
+ for (retries = 0; retries < MAX_RETRIES; retries++) {
+ if (pcie_advk_link_up(pcie)) {
+ printf("PCIE-%d: Link up\n", pcie->first_busno);
+ return 0;
+ }
+
+ udelay(LINK_WAIT_TIMEOUT);
+ }
+
+ printf("PCIE-%d: Link down\n", pcie->first_busno);
+
+ return -ETIMEDOUT;
+}
+
+/**
+ * pcie_advk_setup_hw() - PCIe initailzation
+ *
+ * @pcie: The PCI device to access
+ *
+ * Return: 0 on success
+ */
+static int pcie_advk_setup_hw(struct pcie_advk *pcie)
+{
+ u32 reg;
+
+ /* Set to Direct mode */
+ reg = advk_readl(pcie, CTRL_CONFIG_REG);
+ reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
+ reg |= ((PCIE_CORE_MODE_DIRECT & CTRL_MODE_MASK) << CTRL_MODE_SHIFT);
+ advk_writel(pcie, reg, CTRL_CONFIG_REG);
+
+ /* Set PCI global control register to RC mode */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= (IS_RC_MSK << IS_RC_SHIFT);
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* Set Advanced Error Capabilities and Control PF0 register */
+ reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
+ PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
+ PCIE_CORE_ERR_CAPCTL_ECRC_CHECK |
+ PCIE_CORE_ERR_CAPCTL_ECRC_CHECK_RCV;
+ advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
+
+ /* Set PCIe Device Control and Status 1 PF0 register */
+ reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
+ PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE;
+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+
+ /* Program PCIe Control 2 to disable strict ordering */
+ reg = PCIE_CORE_CTRL2_RESERVED |
+ PCIE_CORE_CTRL2_TD_ENABLE;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+ /* Set GEN2 */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~PCIE_GEN_SEL_MSK;
+ reg |= SPEED_GEN_2;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* Set lane X1 */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~LANE_CNT_MSK;
+ reg |= LANE_COUNT_1;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* Enable link training */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /*
+ * Enable AXI address window location generation:
+ * When it is enabled, the default outbound window
+ * configurations (Default User Field: 0xD0074CFC)
+ * are used to transparent address translation for
+ * the outbound transactions. Thus, PCIe address
+ * windows are not required.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
+ reg |= PCIE_CORE_CTRL2_ADDRWIN_MAP_ENABLE;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
+ /*
+ * Bypass the address window mapping for PIO:
+ * Since PIO access already contains all required
+ * info over AXI interface by PIO registers, the
+ * address window is not required.
+ */
+ reg = advk_readl(pcie, PIO_CTRL);
+ reg |= PIO_CTRL_ADDR_WIN_DISABLE;
+ advk_writel(pcie, reg, PIO_CTRL);
+
+ /* Start link training */
+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+ reg |= PCIE_CORE_LINK_TRAINING;
+ advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+ /* Wait for PCIe link up */
+ if (pcie_advk_wait_for_link(pcie))
+ return -ENXIO;
+
+ reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
+ PCIE_CORE_CMD_IO_ACCESS_EN |
+ PCIE_CORE_CMD_MEM_IO_REQ_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+
+ return 0;
+}
+
+/**
+ * pcie_advk_probe() - Probe the PCIe bus for active link
+ *
+ * @dev: A pointer to the device being operated on
+ *
+ * Probe for an active link on the PCIe bus and configure the controller
+ * to enable this port.
+ *
+ * Return: 0 on success, else -ENODEV
+ */
+static int pcie_advk_probe(struct udevice *dev)
+{
+ struct pcie_advk *pcie = dev_get_priv(dev);
+
+#ifdef CONFIG_DM_GPIO
+ struct gpio_desc reset_gpio;
+
+ gpio_request_by_name(dev, "reset-gpio", 0, &reset_gpio,
+ GPIOD_IS_OUT);
+ /*
+ * Issue reset to add-in card through the dedicated GPIO.
+ * Some boards are connecting the card reset pin to common system
+ * reset wire and others are using separate GPIO port.
+ * In the last case we have to release a reset of the addon card
+ * using this GPIO.
+ *
+ * FIX-ME:
+ * The PCIe RESET signal is not supposed to be released along
+ * with the SOC RESET signal. It should be lowered as early as
+ * possible before PCIe PHY initialization. Moreover, the PCIe
+ * clock should be gated as well.
+ */
+ if (dm_gpio_is_valid(&reset_gpio)) {
+ dev_dbg(pcie->dev, "Toggle PCIE Reset GPIO ...\n");
+ dm_gpio_set_value(&reset_gpio, 0);
+ mdelay(200);
+ dm_gpio_set_value(&reset_gpio, 1);
+ }
+#else
+ dev_dbg(pcie->dev, "PCIE Reset on GPIO support is missing\n");
+#endif /* CONFIG_DM_GPIO */
+
+ pcie->first_busno = dev->seq;
+ pcie->dev = pci_get_controller(dev);
+
+ return pcie_advk_setup_hw(pcie);
+}
+
+/**
+ * pcie_advk_ofdata_to_platdata() - Translate from DT to device state
+ *
+ * @dev: A pointer to the device being operated on
+ *
+ * Translate relevant data from the device tree pertaining to device @dev into
+ * state that the driver will later make use of. This state is stored in the
+ * device's private data structure.
+ *
+ * Return: 0 on success, else -EINVAL
+ */
+static int pcie_advk_ofdata_to_platdata(struct udevice *dev)
+{
+ struct pcie_advk *pcie = dev_get_priv(dev);
+
+ /* Get the register base address */
+ pcie->base = (void *)dev_read_addr_index(dev, 0);
+ if ((fdt_addr_t)pcie->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct dm_pci_ops pcie_advk_ops = {
+ .read_config = pcie_advk_read_config,
+ .write_config = pcie_advk_write_config,
+};
+
+static const struct udevice_id pcie_advk_ids[] = {
+ { .compatible = "marvell,armada-37xx-pcie" },
+ { }
+};
+
+U_BOOT_DRIVER(pcie_advk) = {
+ .name = "pcie_advk",
+ .id = UCLASS_PCI,
+ .of_match = pcie_advk_ids,
+ .ops = &pcie_advk_ops,
+ .ofdata_to_platdata = pcie_advk_ofdata_to_platdata,
+ .probe = pcie_advk_probe,
+ .priv_auto_alloc_size = sizeof(struct pcie_advk),
+};