mpc8xx: remove stale "lwmon" files

Commit acc2372d "mpc8xx: remove lwmon board support" removed support
for the MPC823 based "lwmon" board, but left some board specific POST
files.  This patch cleans up and removes the now unused files.

Signed-off-by: Wolfgang Denk <wd@denx.de>
master
Wolfgang Denk 9 years ago committed by Tom Rini
parent d39449b110
commit e5d3078622
  1. 8
      post/board/lwmon/Makefile
  2. 297
      post/board/lwmon/sysmon.c

@ -1,8 +0,0 @@
#
# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += sysmon.o

@ -1,297 +0,0 @@
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <post.h>
#include <common.h>
/*
* SYSMON test
*
* This test performs the system hardware monitoring.
* The test passes when all the following voltages and temperatures
* are within allowed ranges:
*
* Board temperature
* Front temperature
* +3.3V CPU logic
* +5V logic
* +12V PCMCIA
* +12V CCFL
* +5V standby
*
* CCFL is not enabled if temperature values are not within allowed ranges
*
* See the list off all parameters in the sysmon_table below
*/
#include <post.h>
#include <watchdog.h>
#include <i2c.h>
#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
DECLARE_GLOBAL_DATA_PTR;
static int sysmon_temp_invalid = 0;
/* #define DEBUG */
typedef struct sysmon_s sysmon_t;
typedef struct sysmon_table_s sysmon_table_t;
static void sysmon_lm87_init (sysmon_t * this);
static void sysmon_pic_init (sysmon_t * this);
static uint sysmon_i2c_read (sysmon_t * this, uint addr);
static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr);
static void sysmon_ccfl_disable (sysmon_table_t * this);
static void sysmon_ccfl_enable (sysmon_table_t * this);
struct sysmon_s
{
uchar chip;
void (*init)(sysmon_t *);
uint (*read)(sysmon_t *, uint);
};
static sysmon_t sysmon_lm87 =
{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read};
static sysmon_t sysmon_lm87_sgn =
{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read_sgn};
static sysmon_t sysmon_pic =
{CONFIG_SYS_I2C_PICIO_ADDR, sysmon_pic_init, sysmon_i2c_read};
static sysmon_t * sysmon_list[] =
{
&sysmon_lm87,
&sysmon_lm87_sgn,
&sysmon_pic,
NULL
};
struct sysmon_table_s
{
char * name;
char * unit_name;
sysmon_t * sysmon;
void (*exec_before)(sysmon_table_t *);
void (*exec_after)(sysmon_table_t *);
int unit_precision;
int unit_div;
int unit_min;
int unit_max;
uint val_mask;
uint val_min;
uint val_max;
int val_valid;
uint val_min_alt;
uint val_max_alt;
int val_valid_alt;
uint addr;
};
static sysmon_table_t sysmon_table[] =
{
{"Board temperature", " C", &sysmon_lm87_sgn, NULL, sysmon_ccfl_disable,
1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x6C, 0xC6, 0, 0x27},
{"Front temperature", " C", &sysmon_lm87, NULL, sysmon_ccfl_disable,
1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xB2, 0xF1, 0, 0x29},
{"+3.3V CPU logic", "V", &sysmon_lm87, NULL, NULL,
100, 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0xB6, 0xC9, 0, 0x22},
{"+ 5 V logic", "V", &sysmon_lm87, NULL, NULL,
100, 1000, 0, 6630, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x23},
{"+12 V PCMCIA", "V", &sysmon_lm87, NULL, NULL,
100, 1000, 0, 15460, 0xFF, 0xBC, 0xD0, 0, 0xBC, 0xD0, 0, 0x21},
{"+12 V CCFL", "V", &sysmon_lm87, NULL, sysmon_ccfl_enable,
100, 1000, 0, 15900, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x24},
{"+ 5 V standby", "V", &sysmon_pic, NULL, NULL,
100, 1000, 0, 6040, 0xFF, 0xC8, 0xDE, 0, 0xC8, 0xDE, 0, 0x7C},
};
static int sysmon_table_size = ARRAY_SIZE(sysmon_table);
static int conversion_done = 0;
int sysmon_init_f (void)
{
sysmon_t ** l;
ulong reg;
/* Power on CCFL, PCMCIA */
reg = pic_read (0x60);
reg |= 0x09;
pic_write (0x60, reg);
for (l = sysmon_list; *l; l++) {
(*l)->init(*l);
}
return 0;
}
void sysmon_reloc (void)
{
/* Do nothing for now, sysmon_reloc() is required by the sysmon post */
}
static char *sysmon_unit_value (sysmon_table_t *s, uint val)
{
static char buf[32];
int unit_val =
s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
char *p, sign;
int dec, frac;
if (val == -1) {
return "I/O ERROR";
}
if (unit_val < 0) {
sign = '-';
unit_val = -unit_val;
} else {
sign = '+';
}
p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
frac = unit_val % s->unit_div;
frac /= (s->unit_div / s->unit_precision);
dec = s->unit_precision;
if (dec != 1) {
*p++ = '.';
}
for (dec /= 10; dec != 0; dec /= 10) {
*p++ = '0' + (frac / dec) % 10;
}
strcpy(p, s->unit_name);
return buf;
}
static void sysmon_lm87_init (sysmon_t * this)
{
uchar val;
/* Detect LM87 chip */
if (i2c_read(this->chip, 0x40, 1, &val, 1) || (val & 0x80) != 0 ||
i2c_read(this->chip, 0x3E, 1, &val, 1) || val != 0x02) {
printf("Error: LM87 not found at 0x%02X\n", this->chip);
return;
}
/* Configure pins 5,6 as AIN */
val = 0x03;
if (i2c_write(this->chip, 0x16, 1, &val, 1)) {
printf("Error: can't write LM87 config register\n");
return;
}
/* Start monitoring */
val = 0x01;
if (i2c_write(this->chip, 0x40, 1, &val, 1)) {
printf("Error: can't write LM87 config register\n");
return;
}
}
static void sysmon_pic_init (sysmon_t * this)
{
}
static uint sysmon_i2c_read (sysmon_t * this, uint addr)
{
uchar val;
uint res = i2c_read(this->chip, addr, 1, &val, 1);
return res == 0 ? val : -1;
}
static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr)
{
uchar val;
return i2c_read(this->chip, addr, 1, &val, 1) == 0 ?
128 + (signed char)val : -1;
}
static void sysmon_ccfl_disable (sysmon_table_t * this)
{
if (!this->val_valid_alt) {
sysmon_temp_invalid = 1;
}
}
static void sysmon_ccfl_enable (sysmon_table_t * this)
{
ulong reg;
if (!sysmon_temp_invalid) {
reg = pic_read (0x60);
reg |= 0x06;
pic_write (0x60, reg);
}
}
int sysmon_post_test (int flags)
{
int res = 0;
sysmon_table_t * t;
uint val;
/*
* The A/D conversion on the LM87 sensor takes 300 ms.
*/
if (! conversion_done) {
while (post_time_ms(gd->post_init_f_time) < 300) WATCHDOG_RESET ();
conversion_done = 1;
}
for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
if (t->exec_before) {
t->exec_before(t);
}
val = t->sysmon->read(t->sysmon, t->addr);
if (val != -1) {
t->val_valid = val >= t->val_min && val <= t->val_max;
t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
} else {
t->val_valid = 0;
t->val_valid_alt = 0;
}
if (t->exec_after) {
t->exec_after(t);
}
if ((!t->val_valid) || (flags & POST_MANUAL)) {
printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
printf("allowed range");
printf(" %-8s ..", sysmon_unit_value(t, t->val_min));
printf(" %-8s", sysmon_unit_value(t, t->val_max));
printf(" %s\n", t->val_valid ? "OK" : "FAIL");
}
if (!t->val_valid) {
res = -1;
}
}
return res;
}
#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */
Loading…
Cancel
Save