Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

blackfin: bf609: implement soft switch

Browse Source 
Set up soft switch pins properly in board init code.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Scott Jiang <scott.jiang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
master
Sonic Zhang 14 years ago
parent ab80b65957
commit e7b9aa96b1
2 changed files with 251 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 180
      board/bf609-ezkit/soft_switch.c
  2. 71
      board/bf609-ezkit/soft_switch.h

180
board/bf609-ezkit/soft_switch.c
Unescape View File

@ -0,0 +1,180 @@
/*
* U-boot - main board file
*
* Copyright (c) 2008-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <asm/blackfin.h>
#include <asm/io.h>
#include <i2c.h>
#include "soft_switch.h"
#define SWITCH_ADDR 0x21
#define NUM_SWITCH 3
#define IODIRA 0x0
#define IODIRB 0x1
#define OLATA 0x14
#define OLATB 0x15
struct switch_config {
uchar dir0; /* IODIRA */
uchar dir1; /* IODIRB */
uchar value0; /* OLATA */
uchar value1; /* OLATB */
};
static struct switch_config switch_config_array[NUM_SWITCH] = {
{
/*
U45 Port A U45 Port B
7--------------- RMII_CLK_EN | 7--------------- ~TEMP_THERM_EN
| 6------------- ~CNT0ZM_EN | | 6------------- ~TEMP_IRQ_EN
| | 5----------- ~CNT0DG_EN | | | 5----------- ~UART0CTS_146_EN
| | | 4--------- ~CNT0UD_EN | | | | 4--------- ~UART0CTS_RST_EN
| | | | 3------- ~CAN0RX_EN | | | | | 3------- ~UART0CTS_RTS_LPBK
| | | | | 2----- ~CAN0_ERR_EN | | | | | | 2----- ~UART0CTS_EN
| | | | | | 1--- ~CAN_STB | | | | | | | 1--- ~UART0RX_EN
| | | | | | | 0- CAN_EN | | | | | | | | 0- ~UART0RTS_EN
| | | | | | | | | | | | | | | | |
O O O O O O O O | O O O O O O O O (I/O direction)
1 0 0 0 0 0 1 1 | 1 1 1 1 1 0 0 0 (value being set)
*/
.dir0 = 0x0, /* all output */
.dir1 = 0x0, /* all output */
.value0 = RMII_CLK_EN | CAN_STB | CAN_EN,
.value1 = TEMP_THERM_EN | TEMP_IRQ_EN | UART0CTS_146_EN
| UART0CTS_RST_EN | UART0CTS_RTS_LPBK,
},
{
/*
U46 Port A U46 Port B
7--------------- ~LED4_GPIO_EN | 7--------------- EMPTY
| 6------------- ~LED3_GPIO_EN | | 6------------- ~SPI0D3_EN
| | 5----------- ~LED2_GPIO_EN | | | 5----------- ~SPI0D2_EN
| | | 4--------- ~LED1_GPIO_EN | | | | 4--------- ~SPIFLASH_CS_EN
| | | | 3------- SMC0_LP0_EN | | | | | 3------- ~SD_WP_EN
| | | | | 2----- EMPTY | | | | | | 2----- ~SD_CD_EN
| | | | | | 1--- SMC0_EPPI2 | | | | | | | 1--- ~PUSHBUTTON2_EN
_LP1_SWITCH
| | | | | | | 0- OVERRIDE_SMC0 | | | | | | | | 0- ~PUSHBUTTON1_EN
_LP0_BOOT
| | | | | | | | | | | | | | | | |
O O O O O O O O | O O O O O O O O (I/O direction)
0 0 0 0 0 X 0 1 | X 0 0 0 0 0 0 0 (value being set)
*/
.dir0 = 0x0, /* all output */
.dir1 = 0x0, /* all output */
#ifdef CONFIG_BFIN_LINKPORT
.value0 = OVERRIDE_SMC0_LP0_BOOT,
#else
.value0 = SMC0_EPPI2_LP1_SWITCH,
#endif
.value1 = 0x0,
},
{
/*
U47 Port A U47 Port B
7--------------- ~PD2_SPI0MISO | 7--------------- EMPTY
_EI3_EN
| 6------------- ~PD1_SPI0D3 | | 6------------- EMPTY
_EPPI1D17
_SPI0SEL2
_EI3_EN
| | 5----------- ~PD0_SPI0D2 | | | 5----------- EMPTY
_EPPI1D16
_SPI0SEL3
_EI3_EN
| | | 4--------- ~WAKE_PUSH | | | | 4--------- EMPTY
BUTTON_EN
| | | | 3------- ~ETHERNET_EN | | | | | 3------- EMPTY
| | | | | 2----- PHYAD0 | | | | | | 2----- EMPTY
| | | | | | 1--- PHY_PWR | | | | | | | 1--- ~PD4_SPI0CK_EI3_EN
_DWN_INT
| | | | | | | 0- ~PHYINT_EN | | | | | | | | 0- ~PD3_SPI0MOSI_EI3_EN
| | | | | | | | | | | | | | | | |
O O O O O I I O | O O O O O O O O (I/O direction)
1 1 1 0 0 0 0 0 | X X X X X X 1 1 (value being set)
*/
.dir0 = 0x6, /* bits 1 and 2 input, all others output */
.dir1 = 0x0, /* all output */
.value0 = PD1_SPI0D3_EN | PD0_SPI0D2_EN,
.value1 = 0,
},
};
static int setup_soft_switch(int addr, struct switch_config *config)
{
int ret = 0;
ret = i2c_write(addr, OLATA, 1, &config->value0, 1);
if (ret)
return ret;
ret = i2c_write(addr, OLATB, 1, &config->value1, 1);
if (ret)
return ret;
ret = i2c_write(addr, IODIRA, 1, &config->dir0, 1);
if (ret)
return ret;
return i2c_write(addr, IODIRB, 1, &config->dir1, 1);
}
int config_switch_bit(int num, int port, int bit, int dir, uchar value)
{
int addr = SWITCH_ADDR + num;
int ret, data_reg, dir_reg;
uchar tmp;
if (port == IO_PORT_A) {
data_reg = OLATA;
dir_reg = IODIRA;
} else {
data_reg = OLATB;
dir_reg = IODIRB;
}
if (dir == IO_PORT_INPUT) {
ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
if (ret)
return ret;
tmp |= bit;
return i2c_write(addr, dir_reg, 1, &tmp, 1);
} else {
ret = i2c_read(addr, data_reg, 1, &tmp, 1);
if (ret)
return ret;
if (value)
tmp |= bit;
else
tmp &= ~bit;
ret = i2c_write(addr, data_reg, 1, &tmp, 1);
if (ret)
return ret;
ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
if (ret)
return ret;
tmp &= ~bit;
return i2c_write(addr, dir_reg, 1, &tmp, 1);
}
}
int setup_board_switches(void)
{
int ret;
int i;
for (i = 0; i < NUM_SWITCH; i++) {
ret = setup_soft_switch(SWITCH_ADDR + i,
&switch_config_array[i]);
if (ret)
return ret;
}
return 0;
}

71
board/bf609-ezkit/soft_switch.h
Unescape View File

@ -0,0 +1,71 @@
/*
* U-boot - main board file
*
* Copyright (c) 2008-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef __SOFT_SWITCH_H__
#define __SOFT_SWITCH_H__
/* switch 0 port A */
#define CAN_EN 0x1
#define CAN_STB 0x2
#define CAN0_ERR_EN 0x4
#define CAN0RX_EN 0x8
#define CNT0UD_EN 0x10
#define CNT0DG_EN 0x20
#define CNT0ZM_EN 0x40
#define RMII_CLK_EN 0x80
/* switch 0 port B */
#define UART0RTS_EN 0x1
#define UART0RX_EN 0x2
#define UART0CTS_EN 0x4
#define UART0CTS_RTS_LPBK 0x8
#define UART0CTS_RST_EN 0x10
#define UART0CTS_146_EN 0x20
#define TEMP_IRQ_EN 0x40
#define TEMP_THERM_EN 0x80
/* switch 1 port A */
#define OVERRIDE_SMC0_LP0_BOOT 0x1
#define SMC0_EPPI2_LP1_SWITCH 0x2
#define SMC0_LP0_EN 0x8
#define LED1_GPIO_EN 0x10
#define LED2_GPIO_EN 0x20
#define LED3_GPIO_EN 0x40
#define LED4_GPIO_EN 0x80
/* switch 1 port B */
#define PUSHBUTTON1_EN 0x1
#define PUSHBUTTON2_EN 0x2
#define SD_CD_EN 0x4
#define SD_WP_EN 0x8
#define SPIFLASH_CS_EN 0x10
#define SPI0D2_EN 0x20
#define SPI0D3_EN 0x40
/* switch 2 port A */
#define PHYINT_EN 0x1
#define PHY_PWR_DWN_INT 0x2
#define PHYAD0 0x4
#define ETHERNET_EN 0x8
#define WAKE_PUSHBUTTON_EN 0x10
#define PD0_SPI0D2_EN 0x20
#define PD1_SPI0D3_EN 0x40
#define PD2_SPI0MISO_EN 0x80
/* switch 2 port B */
#define PD3_SPI0MOSI_EN 0x1
#define PD4_SPI0CK_EN 0x2
#define IO_PORT_A 0
#define IO_PORT_B 1
#define IO_PORT_INPUT 0
#define IO_PORT_OUTPUT 1
int config_switch_bit(int num, int port, int bit, int dir, uchar value);
int setup_board_switches(void);
#endif
Write Preview
Loading…
Cancel
Save