Tom Rini
10 years ago
commit
e8d124fae0
@ -0,0 +1,333 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada 370 and Armada XP SoC |
||||
* |
||||
* Copyright (C) 2012 Marvell |
||||
* |
||||
* Lior Amsalem <alior@marvell.com> |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* Ben Dooks <ben.dooks@codethink.co.uk> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
* |
||||
* This file contains the definitions that are common to the Armada |
||||
* 370 and Armada XP SoC. |
||||
*/ |
||||
|
||||
/include/ "skeleton64.dtsi" |
||||
|
||||
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
||||
|
||||
/ { |
||||
model = "Marvell Armada 370 and XP SoC"; |
||||
compatible = "marvell,armada-370-xp"; |
||||
|
||||
aliases { |
||||
serial0 = &uart0; |
||||
serial1 = &uart1; |
||||
}; |
||||
|
||||
cpus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
cpu@0 { |
||||
compatible = "marvell,sheeva-v7"; |
||||
device_type = "cpu"; |
||||
reg = <0>; |
||||
}; |
||||
}; |
||||
|
||||
pmu { |
||||
compatible = "arm,cortex-a9-pmu"; |
||||
interrupts-extended = <&mpic 3>; |
||||
}; |
||||
|
||||
soc { |
||||
#address-cells = <2>; |
||||
#size-cells = <1>; |
||||
controller = <&mbusc>; |
||||
interrupt-parent = <&mpic>; |
||||
pcie-mem-aperture = <0xf8000000 0x7e00000>; |
||||
pcie-io-aperture = <0xffe00000 0x100000>; |
||||
|
||||
devbus-bootcs { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs0 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs1 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs2 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs3 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
internal-regs { |
||||
compatible = "simple-bus"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
||||
|
||||
rtc@10300 { |
||||
compatible = "marvell,orion-rtc"; |
||||
reg = <0x10300 0x20>; |
||||
interrupts = <50>; |
||||
}; |
||||
|
||||
spi0: spi@10600 { |
||||
reg = <0x10600 0x28>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
cell-index = <0>; |
||||
interrupts = <30>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
spi1: spi@10680 { |
||||
reg = <0x10680 0x28>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
cell-index = <1>; |
||||
interrupts = <92>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
i2c0: i2c@11000 { |
||||
compatible = "marvell,mv64xxx-i2c"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
interrupts = <31>; |
||||
timeout-ms = <1000>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
i2c1: i2c@11100 { |
||||
compatible = "marvell,mv64xxx-i2c"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
interrupts = <32>; |
||||
timeout-ms = <1000>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
uart0: serial@12000 { |
||||
compatible = "snps,dw-apb-uart"; |
||||
reg = <0x12000 0x100>; |
||||
reg-shift = <2>; |
||||
interrupts = <41>; |
||||
reg-io-width = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
uart1: serial@12100 { |
||||
compatible = "snps,dw-apb-uart"; |
||||
reg = <0x12100 0x100>; |
||||
reg-shift = <2>; |
||||
interrupts = <42>; |
||||
reg-io-width = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pinctrl: pin-ctrl@18000 { |
||||
reg = <0x18000 0x38>; |
||||
}; |
||||
|
||||
coredivclk: corediv-clock@18740 { |
||||
compatible = "marvell,armada-370-corediv-clock"; |
||||
reg = <0x18740 0xc>; |
||||
#clock-cells = <1>; |
||||
clocks = <&mainpll>; |
||||
clock-output-names = "nand"; |
||||
}; |
||||
|
||||
mbusc: mbus-controller@20000 { |
||||
compatible = "marvell,mbus-controller"; |
||||
reg = <0x20000 0x100>, <0x20180 0x20>, |
||||
<0x20250 0x8>; |
||||
}; |
||||
|
||||
mpic: interrupt-controller@20a00 { |
||||
compatible = "marvell,mpic"; |
||||
#interrupt-cells = <1>; |
||||
#size-cells = <1>; |
||||
interrupt-controller; |
||||
msi-controller; |
||||
}; |
||||
|
||||
coherency-fabric@20200 { |
||||
compatible = "marvell,coherency-fabric"; |
||||
reg = <0x20200 0xb0>, <0x21010 0x1c>; |
||||
}; |
||||
|
||||
timer@20300 { |
||||
reg = <0x20300 0x30>, <0x21040 0x30>; |
||||
interrupts = <37>, <38>, <39>, <40>, <5>, <6>; |
||||
}; |
||||
|
||||
watchdog@20300 { |
||||
reg = <0x20300 0x34>, <0x20704 0x4>; |
||||
}; |
||||
|
||||
pmsu@22000 { |
||||
compatible = "marvell,armada-370-pmsu"; |
||||
reg = <0x22000 0x1000>; |
||||
}; |
||||
|
||||
usb@50000 { |
||||
compatible = "marvell,orion-ehci"; |
||||
reg = <0x50000 0x500>; |
||||
interrupts = <45>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
usb@51000 { |
||||
compatible = "marvell,orion-ehci"; |
||||
reg = <0x51000 0x500>; |
||||
interrupts = <46>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
eth0: ethernet@70000 { |
||||
reg = <0x70000 0x4000>; |
||||
interrupts = <8>; |
||||
clocks = <&gateclk 4>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
mdio: mdio { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
compatible = "marvell,orion-mdio"; |
||||
reg = <0x72004 0x4>; |
||||
clocks = <&gateclk 4>; |
||||
}; |
||||
|
||||
eth1: ethernet@74000 { |
||||
reg = <0x74000 0x4000>; |
||||
interrupts = <10>; |
||||
clocks = <&gateclk 3>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
sata@a0000 { |
||||
compatible = "marvell,armada-370-sata"; |
||||
reg = <0xa0000 0x5000>; |
||||
interrupts = <55>; |
||||
clocks = <&gateclk 15>, <&gateclk 30>; |
||||
clock-names = "0", "1"; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
nand@d0000 { |
||||
compatible = "marvell,armada370-nand"; |
||||
reg = <0xd0000 0x54>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
interrupts = <113>; |
||||
clocks = <&coredivclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
mvsdio@d4000 { |
||||
compatible = "marvell,orion-sdio"; |
||||
reg = <0xd4000 0x200>; |
||||
interrupts = <54>; |
||||
clocks = <&gateclk 17>; |
||||
bus-width = <4>; |
||||
cap-sdio-irq; |
||||
cap-sd-highspeed; |
||||
cap-mmc-highspeed; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
clocks { |
||||
/* 2 GHz fixed main PLL */ |
||||
mainpll: mainpll { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <2000000000>; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,152 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada 380 SoC. |
||||
* |
||||
* Copyright (C) 2014 Marvell |
||||
* |
||||
* Lior Amsalem <alior@marvell.com> |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include "armada-38x.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada 380 family SoC"; |
||||
compatible = "marvell,armada380"; |
||||
|
||||
cpus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
enable-method = "marvell,armada-380-smp"; |
||||
|
||||
cpu@0 { |
||||
device_type = "cpu"; |
||||
compatible = "arm,cortex-a9"; |
||||
reg = <0>; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
internal-regs { |
||||
pinctrl@18000 { |
||||
compatible = "marvell,mv88f6810-pinctrl"; |
||||
}; |
||||
}; |
||||
|
||||
pcie-controller { |
||||
compatible = "marvell,armada-370-pcie"; |
||||
status = "disabled"; |
||||
device_type = "pci"; |
||||
|
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
|
||||
msi-parent = <&mpic>; |
||||
bus-range = <0x00 0xff>; |
||||
|
||||
ranges = |
||||
<0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 |
||||
0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 |
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 |
||||
0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */ |
||||
0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */ |
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */ |
||||
0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */ |
||||
0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */ |
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */>; |
||||
|
||||
/* x1 port */ |
||||
pcie@1,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
||||
reg = <0x0800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 8>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
/* x1 port */ |
||||
pcie@2,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
||||
reg = <0x1000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 5>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
/* x1 port */ |
||||
pcie@3,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; |
||||
reg = <0x1800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
||||
marvell,pcie-port = <2>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 6>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,184 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada 385 SoC. |
||||
* |
||||
* Copyright (C) 2014 Marvell |
||||
* |
||||
* Lior Amsalem <alior@marvell.com> |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include "armada-38x.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada 385 family SoC"; |
||||
compatible = "marvell,armada385", "marvell,armada380"; |
||||
|
||||
cpus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
enable-method = "marvell,armada-380-smp"; |
||||
|
||||
cpu@0 { |
||||
device_type = "cpu"; |
||||
compatible = "arm,cortex-a9"; |
||||
reg = <0>; |
||||
}; |
||||
cpu@1 { |
||||
device_type = "cpu"; |
||||
compatible = "arm,cortex-a9"; |
||||
reg = <1>; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
internal-regs { |
||||
pinctrl@18000 { |
||||
compatible = "marvell,mv88f6820-pinctrl"; |
||||
}; |
||||
}; |
||||
|
||||
pcie-controller { |
||||
compatible = "marvell,armada-370-pcie"; |
||||
status = "disabled"; |
||||
device_type = "pci"; |
||||
|
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
|
||||
msi-parent = <&mpic>; |
||||
bus-range = <0x00 0xff>; |
||||
|
||||
ranges = |
||||
<0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 |
||||
0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 |
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 |
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 |
||||
0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */ |
||||
0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */ |
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */ |
||||
0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */ |
||||
0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */ |
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */ |
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */ |
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>; |
||||
|
||||
/* |
||||
* This port can be either x4 or x1. When |
||||
* configured in x4 by the bootloader, then |
||||
* pcie@4,0 is not available. |
||||
*/ |
||||
pcie@1,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
||||
reg = <0x0800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 8>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
/* x1 port */ |
||||
pcie@2,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
||||
reg = <0x1000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 5>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
/* x1 port */ |
||||
pcie@3,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; |
||||
reg = <0x1800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
||||
marvell,pcie-port = <2>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 6>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
/* |
||||
* x1 port only available when pcie@1,0 is |
||||
* configured as a x1 port |
||||
*/ |
||||
pcie@4,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; |
||||
reg = <0x2000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
||||
marvell,pcie-port = <3>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 7>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,413 @@ |
||||
/* |
||||
* Device Tree file for Marvell Armada 385 development board |
||||
* (RD-88F6820-GP) |
||||
* |
||||
* Copyright (C) 2014 Marvell |
||||
* |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is licensed under the terms of the GNU General Public |
||||
* License version 2. This program is licensed "as is" without |
||||
* any warranty of any kind, whether express or implied. |
||||
* |
||||
* Or, alternatively, |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use, |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
#include "armada-388.dtsi" |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
|
||||
/ { |
||||
model = "Marvell Armada 385 GP"; |
||||
compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; |
||||
|
||||
chosen { |
||||
stdout-path = "serial0:115200n8"; |
||||
}; |
||||
|
||||
memory { |
||||
device_type = "memory"; |
||||
reg = <0x00000000 0x80000000>; /* 2 GB */ |
||||
}; |
||||
|
||||
soc { |
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
||||
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; |
||||
|
||||
internal-regs { |
||||
spi@10600 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&spi0_pins>; |
||||
status = "okay"; |
||||
|
||||
spi-flash@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "st,m25p128", "jedec,spi-nor"; |
||||
reg = <0>; /* Chip select 0 */ |
||||
spi-max-frequency = <50000000>; |
||||
m25p,fast-read; |
||||
}; |
||||
}; |
||||
|
||||
i2c@11000 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&i2c0_pins>; |
||||
status = "okay"; |
||||
clock-frequency = <100000>; |
||||
/* |
||||
* The EEPROM located at adresse 54 is needed |
||||
* for the boot - DO NOT ERASE IT - |
||||
*/ |
||||
|
||||
expander0: pca9555@20 { |
||||
compatible = "nxp,pca9555"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pca0_pins>; |
||||
interrupt-parent = <&gpio0>; |
||||
interrupts = <18 IRQ_TYPE_EDGE_FALLING>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
reg = <0x20>; |
||||
}; |
||||
|
||||
expander1: pca9555@21 { |
||||
compatible = "nxp,pca9555"; |
||||
pinctrl-names = "default"; |
||||
interrupt-parent = <&gpio0>; |
||||
interrupts = <18 IRQ_TYPE_EDGE_FALLING>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
reg = <0x21>; |
||||
}; |
||||
|
||||
}; |
||||
|
||||
serial@12000 { |
||||
/* |
||||
* Exported on the micro USB connector CON16 |
||||
* through an FTDI |
||||
*/ |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&uart0_pins>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
/* GE1 CON15 */ |
||||
ethernet@30000 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&ge1_rgmii_pins>; |
||||
status = "okay"; |
||||
phy = <&phy1>; |
||||
phy-mode = "rgmii-id"; |
||||
}; |
||||
|
||||
/* CON4 */ |
||||
usb@58000 { |
||||
vcc-supply = <®_usb2_0_vbus>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
/* GE0 CON1 */ |
||||
ethernet@70000 { |
||||
pinctrl-names = "default"; |
||||
/* |
||||
* The Reference Clock 0 is used to provide a |
||||
* clock to the PHY |
||||
*/ |
||||
pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; |
||||
status = "okay"; |
||||
phy = <&phy0>; |
||||
phy-mode = "rgmii-id"; |
||||
}; |
||||
|
||||
|
||||
mdio@72004 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mdio_pins>; |
||||
|
||||
phy0: ethernet-phy@1 { |
||||
reg = <1>; |
||||
}; |
||||
|
||||
phy1: ethernet-phy@0 { |
||||
reg = <0>; |
||||
}; |
||||
}; |
||||
|
||||
sata@a8000 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&sata0_pins>, <&sata1_pins>; |
||||
status = "okay"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
sata0: sata-port@0 { |
||||
reg = <0>; |
||||
target-supply = <®_5v_sata0>; |
||||
}; |
||||
|
||||
sata1: sata-port@1 { |
||||
reg = <1>; |
||||
target-supply = <®_5v_sata1>; |
||||
}; |
||||
}; |
||||
|
||||
sata@e0000 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&sata2_pins>, <&sata3_pins>; |
||||
status = "okay"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
sata2: sata-port@0 { |
||||
reg = <0>; |
||||
target-supply = <®_5v_sata2>; |
||||
}; |
||||
|
||||
sata3: sata-port@1 { |
||||
reg = <1>; |
||||
target-supply = <®_5v_sata3>; |
||||
}; |
||||
}; |
||||
|
||||
sdhci@d8000 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&sdhci_pins>; |
||||
cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; |
||||
no-1-8-v; |
||||
wp-inverted; |
||||
bus-width = <8>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
/* CON5 */ |
||||
usb3@f0000 { |
||||
vcc-supply = <®_usb2_1_vbus>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
/* CON7 */ |
||||
usb3@f8000 { |
||||
vcc-supply = <®_usb3_vbus>; |
||||
status = "okay"; |
||||
}; |
||||
}; |
||||
|
||||
pcie-controller { |
||||
status = "okay"; |
||||
/* |
||||
* One PCIe units is accessible through |
||||
* standard PCIe slot on the board. |
||||
*/ |
||||
pcie@1,0 { |
||||
/* Port 0, Lane 0 */ |
||||
status = "okay"; |
||||
}; |
||||
|
||||
/* |
||||
* The two other PCIe units are accessible |
||||
* through mini PCIe slot on the board. |
||||
*/ |
||||
pcie@2,0 { |
||||
/* Port 1, Lane 0 */ |
||||
status = "okay"; |
||||
}; |
||||
pcie@3,0 { |
||||
/* Port 2, Lane 0 */ |
||||
status = "okay"; |
||||
}; |
||||
}; |
||||
|
||||
gpio-fan { |
||||
compatible = "gpio-fan"; |
||||
gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; |
||||
gpio-fan,speed-map = < 0 0 |
||||
3000 1>; |
||||
}; |
||||
}; |
||||
|
||||
reg_usb3_vbus: usb3-vbus { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "usb3-vbus"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_usb2_0_vbus: v5-vbus0 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v5.0-vbus0"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
gpio = <&expander1 14 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_usb2_1_vbus: v5-vbus1 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v5.0-vbus1"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_usb2_1_vbus: v5-vbus1 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v5.0-vbus1"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_sata0: pwr-sata0 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "pwr_en_sata0"; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
|
||||
}; |
||||
|
||||
reg_5v_sata0: v5-sata0 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v5.0-sata0"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata0>; |
||||
}; |
||||
|
||||
reg_12v_sata0: v12-sata0 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v12.0-sata0"; |
||||
regulator-min-microvolt = <12000000>; |
||||
regulator-max-microvolt = <12000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata0>; |
||||
}; |
||||
|
||||
reg_sata1: pwr-sata1 { |
||||
regulator-name = "pwr_en_sata1"; |
||||
compatible = "regulator-fixed"; |
||||
regulator-min-microvolt = <12000000>; |
||||
regulator-max-microvolt = <12000000>; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_5v_sata1: v5-sata1 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v5.0-sata1"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata1>; |
||||
}; |
||||
|
||||
reg_12v_sata1: v12-sata1 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v12.0-sata1"; |
||||
regulator-min-microvolt = <12000000>; |
||||
regulator-max-microvolt = <12000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata1>; |
||||
}; |
||||
|
||||
reg_sata2: pwr-sata2 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "pwr_en_sata2"; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_5v_sata2: v5-sata2 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v5.0-sata2"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata2>; |
||||
}; |
||||
|
||||
reg_12v_sata2: v12-sata2 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v12.0-sata2"; |
||||
regulator-min-microvolt = <12000000>; |
||||
regulator-max-microvolt = <12000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata2>; |
||||
}; |
||||
|
||||
reg_sata3: pwr-sata3 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "pwr_en_sata3"; |
||||
enable-active-high; |
||||
regulator-always-on; |
||||
gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
reg_5v_sata3: v5-sata3 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v5.0-sata3"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata3>; |
||||
}; |
||||
|
||||
reg_12v_sata3: v12-sata3 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "v12.0-sata3"; |
||||
regulator-min-microvolt = <12000000>; |
||||
regulator-max-microvolt = <12000000>; |
||||
regulator-always-on; |
||||
vin-supply = <®_sata3>; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
pca0_pins: pca0_pins { |
||||
marvell,pins = "mpp18"; |
||||
marvell,function = "gpio"; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,70 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada 388 SoC. |
||||
* |
||||
* Copyright (C) 2015 Marvell |
||||
* |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is licensed under the terms of the GNU General Public |
||||
* License version 2. This program is licensed "as is" without |
||||
* any warranty of any kind, whether express or implied. |
||||
* |
||||
* Or, alternatively, |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use, |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
* |
||||
* |
||||
* The main difference with the Armada 385 is that the 388 can handle two more |
||||
* SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl |
||||
* property and the name of the SoC, and add the second SATA host which control |
||||
* the 2 other ports. |
||||
*/ |
||||
|
||||
#include "armada-385.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada 388 family SoC"; |
||||
compatible = "marvell,armada388", "marvell,armada385", |
||||
"marvell,armada380"; |
||||
|
||||
soc { |
||||
internal-regs { |
||||
pinctrl@18000 { |
||||
compatible = "marvell,mv88f6828-pinctrl"; |
||||
}; |
||||
|
||||
sata@e0000 { |
||||
compatible = "marvell,armada-380-ahci"; |
||||
reg = <0xe0000 0x2000>; |
||||
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&gateclk 30>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
}; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,600 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada 38x family of SoCs. |
||||
* |
||||
* Copyright (C) 2014 Marvell |
||||
* |
||||
* Lior Amsalem <alior@marvell.com> |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include "skeleton.dtsi" |
||||
#include <dt-bindings/interrupt-controller/arm-gic.h> |
||||
#include <dt-bindings/interrupt-controller/irq.h> |
||||
|
||||
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
||||
|
||||
/ { |
||||
model = "Marvell Armada 38x family SoC"; |
||||
compatible = "marvell,armada380"; |
||||
|
||||
aliases { |
||||
gpio0 = &gpio0; |
||||
gpio1 = &gpio1; |
||||
serial0 = &uart0; |
||||
serial1 = &uart1; |
||||
}; |
||||
|
||||
pmu { |
||||
compatible = "arm,cortex-a9-pmu"; |
||||
interrupts-extended = <&mpic 3>; |
||||
}; |
||||
|
||||
soc { |
||||
compatible = "marvell,armada380-mbus", "simple-bus"; |
||||
#address-cells = <2>; |
||||
#size-cells = <1>; |
||||
controller = <&mbusc>; |
||||
interrupt-parent = <&gic>; |
||||
pcie-mem-aperture = <0xe0000000 0x8000000>; |
||||
pcie-io-aperture = <0xe8000000 0x100000>; |
||||
|
||||
bootrom { |
||||
compatible = "marvell,bootrom"; |
||||
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; |
||||
}; |
||||
|
||||
devbus-bootcs { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs0 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs1 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs2 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
devbus-cs3 { |
||||
compatible = "marvell,mvebu-devbus"; |
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; |
||||
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
internal-regs { |
||||
compatible = "simple-bus"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
||||
|
||||
L2: cache-controller@8000 { |
||||
compatible = "arm,pl310-cache"; |
||||
reg = <0x8000 0x1000>; |
||||
cache-unified; |
||||
cache-level = <2>; |
||||
}; |
||||
|
||||
scu@c000 { |
||||
compatible = "arm,cortex-a9-scu"; |
||||
reg = <0xc000 0x58>; |
||||
}; |
||||
|
||||
timer@c600 { |
||||
compatible = "arm,cortex-a9-twd-timer"; |
||||
reg = <0xc600 0x20>; |
||||
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
||||
clocks = <&coreclk 2>; |
||||
}; |
||||
|
||||
gic: interrupt-controller@d000 { |
||||
compatible = "arm,cortex-a9-gic"; |
||||
#interrupt-cells = <3>; |
||||
#size-cells = <0>; |
||||
interrupt-controller; |
||||
reg = <0xd000 0x1000>, |
||||
<0xc100 0x100>; |
||||
}; |
||||
|
||||
spi0: spi@10600 { |
||||
compatible = "marvell,armada-380-spi", |
||||
"marvell,orion-spi"; |
||||
reg = <0x10600 0x50>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
cell-index = <0>; |
||||
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
spi1: spi@10680 { |
||||
compatible = "marvell,armada-380-spi", |
||||
"marvell,orion-spi"; |
||||
reg = <0x10680 0x50>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
cell-index = <1>; |
||||
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
i2c0: i2c@11000 { |
||||
compatible = "marvell,mv64xxx-i2c"; |
||||
reg = <0x11000 0x20>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
||||
timeout-ms = <1000>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
i2c1: i2c@11100 { |
||||
compatible = "marvell,mv64xxx-i2c"; |
||||
reg = <0x11100 0x20>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
||||
timeout-ms = <1000>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
uart0: serial@12000 { |
||||
compatible = "snps,dw-apb-uart"; |
||||
reg = <0x12000 0x100>; |
||||
reg-shift = <2>; |
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
||||
reg-io-width = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
uart1: serial@12100 { |
||||
compatible = "snps,dw-apb-uart"; |
||||
reg = <0x12100 0x100>; |
||||
reg-shift = <2>; |
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
||||
reg-io-width = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pinctrl: pinctrl@18000 { |
||||
reg = <0x18000 0x20>; |
||||
|
||||
ge0_rgmii_pins: ge-rgmii-pins-0 { |
||||
marvell,pins = "mpp6", "mpp7", "mpp8", |
||||
"mpp9", "mpp10", "mpp11", |
||||
"mpp12", "mpp13", "mpp14", |
||||
"mpp15", "mpp16", "mpp17"; |
||||
marvell,function = "ge0"; |
||||
}; |
||||
|
||||
ge1_rgmii_pins: ge-rgmii-pins-1 { |
||||
marvell,pins = "mpp21", "mpp27", "mpp28", |
||||
"mpp29", "mpp30", "mpp31", |
||||
"mpp32", "mpp37", "mpp38", |
||||
"mpp39", "mpp40", "mpp41"; |
||||
marvell,function = "ge1"; |
||||
}; |
||||
|
||||
i2c0_pins: i2c-pins-0 { |
||||
marvell,pins = "mpp2", "mpp3"; |
||||
marvell,function = "i2c0"; |
||||
}; |
||||
|
||||
mdio_pins: mdio-pins { |
||||
marvell,pins = "mpp4", "mpp5"; |
||||
marvell,function = "ge"; |
||||
}; |
||||
|
||||
ref_clk0_pins: ref-clk-pins-0 { |
||||
marvell,pins = "mpp45"; |
||||
marvell,function = "ref"; |
||||
}; |
||||
|
||||
ref_clk1_pins: ref-clk-pins-1 { |
||||
marvell,pins = "mpp46"; |
||||
marvell,function = "ref"; |
||||
}; |
||||
|
||||
spi0_pins: spi-pins-0 { |
||||
marvell,pins = "mpp22", "mpp23", "mpp24", |
||||
"mpp25"; |
||||
marvell,function = "spi0"; |
||||
}; |
||||
|
||||
spi1_pins: spi-pins-1 { |
||||
marvell,pins = "mpp56", "mpp57", "mpp58", |
||||
"mpp59"; |
||||
marvell,function = "spi1"; |
||||
}; |
||||
|
||||
uart0_pins: uart-pins-0 { |
||||
marvell,pins = "mpp0", "mpp1"; |
||||
marvell,function = "ua0"; |
||||
}; |
||||
|
||||
uart1_pins: uart-pins-1 { |
||||
marvell,pins = "mpp19", "mpp20"; |
||||
marvell,function = "ua1"; |
||||
}; |
||||
|
||||
sdhci_pins: sdhci-pins { |
||||
marvell,pins = "mpp48", "mpp49", "mpp50", |
||||
"mpp52", "mpp53", "mpp54", |
||||
"mpp55", "mpp57", "mpp58", |
||||
"mpp59"; |
||||
marvell,function = "sd0"; |
||||
}; |
||||
|
||||
sata0_pins: sata-pins-0 { |
||||
marvell,pins = "mpp20"; |
||||
marvell,function = "sata0"; |
||||
}; |
||||
|
||||
sata1_pins: sata-pins-1 { |
||||
marvell,pins = "mpp19"; |
||||
marvell,function = "sata1"; |
||||
}; |
||||
|
||||
sata2_pins: sata-pins-2 { |
||||
marvell,pins = "mpp47"; |
||||
marvell,function = "sata2"; |
||||
}; |
||||
|
||||
sata3_pins: sata-pins-3 { |
||||
marvell,pins = "mpp44"; |
||||
marvell,function = "sata3"; |
||||
}; |
||||
}; |
||||
|
||||
gpio0: gpio@18100 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18100 0x40>; |
||||
ngpios = <32>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
||||
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
||||
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
||||
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
||||
}; |
||||
|
||||
gpio1: gpio@18140 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18140 0x40>; |
||||
ngpios = <28>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
||||
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
||||
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
||||
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
||||
}; |
||||
|
||||
system-controller@18200 { |
||||
compatible = "marvell,armada-380-system-controller", |
||||
"marvell,armada-370-xp-system-controller"; |
||||
reg = <0x18200 0x100>; |
||||
}; |
||||
|
||||
gateclk: clock-gating-control@18220 { |
||||
compatible = "marvell,armada-380-gating-clock"; |
||||
reg = <0x18220 0x4>; |
||||
clocks = <&coreclk 0>; |
||||
#clock-cells = <1>; |
||||
}; |
||||
|
||||
coreclk: mvebu-sar@18600 { |
||||
compatible = "marvell,armada-380-core-clock"; |
||||
reg = <0x18600 0x04>; |
||||
#clock-cells = <1>; |
||||
}; |
||||
|
||||
mbusc: mbus-controller@20000 { |
||||
compatible = "marvell,mbus-controller"; |
||||
reg = <0x20000 0x100>, <0x20180 0x20>; |
||||
}; |
||||
|
||||
mpic: interrupt-controller@20a00 { |
||||
compatible = "marvell,mpic"; |
||||
reg = <0x20a00 0x2d0>, <0x21070 0x58>; |
||||
#interrupt-cells = <1>; |
||||
#size-cells = <1>; |
||||
interrupt-controller; |
||||
msi-controller; |
||||
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
||||
}; |
||||
|
||||
timer@20300 { |
||||
compatible = "marvell,armada-380-timer", |
||||
"marvell,armada-xp-timer"; |
||||
reg = <0x20300 0x30>, <0x21040 0x30>; |
||||
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
||||
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
||||
<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
||||
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
||||
<&mpic 5>, |
||||
<&mpic 6>; |
||||
clocks = <&coreclk 2>, <&refclk>; |
||||
clock-names = "nbclk", "fixed"; |
||||
}; |
||||
|
||||
watchdog@20300 { |
||||
compatible = "marvell,armada-380-wdt"; |
||||
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; |
||||
clocks = <&coreclk 2>, <&refclk>; |
||||
clock-names = "nbclk", "fixed"; |
||||
}; |
||||
|
||||
cpurst@20800 { |
||||
compatible = "marvell,armada-370-cpu-reset"; |
||||
reg = <0x20800 0x10>; |
||||
}; |
||||
|
||||
mpcore-soc-ctrl@20d20 { |
||||
compatible = "marvell,armada-380-mpcore-soc-ctrl"; |
||||
reg = <0x20d20 0x6c>; |
||||
}; |
||||
|
||||
coherency-fabric@21010 { |
||||
compatible = "marvell,armada-380-coherency-fabric"; |
||||
reg = <0x21010 0x1c>; |
||||
}; |
||||
|
||||
pmsu@22000 { |
||||
compatible = "marvell,armada-380-pmsu"; |
||||
reg = <0x22000 0x1000>; |
||||
}; |
||||
|
||||
eth1: ethernet@30000 { |
||||
compatible = "marvell,armada-370-neta"; |
||||
reg = <0x30000 0x4000>; |
||||
interrupts-extended = <&mpic 10>; |
||||
clocks = <&gateclk 3>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
eth2: ethernet@34000 { |
||||
compatible = "marvell,armada-370-neta"; |
||||
reg = <0x34000 0x4000>; |
||||
interrupts-extended = <&mpic 12>; |
||||
clocks = <&gateclk 2>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
usb@58000 { |
||||
compatible = "marvell,orion-ehci"; |
||||
reg = <0x58000 0x500>; |
||||
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&gateclk 18>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
xor@60800 { |
||||
compatible = "marvell,orion-xor"; |
||||
reg = <0x60800 0x100 |
||||
0x60a00 0x100>; |
||||
clocks = <&gateclk 22>; |
||||
status = "okay"; |
||||
|
||||
xor00 { |
||||
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
}; |
||||
xor01 { |
||||
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
dmacap,memset; |
||||
}; |
||||
}; |
||||
|
||||
xor@60900 { |
||||
compatible = "marvell,orion-xor"; |
||||
reg = <0x60900 0x100 |
||||
0x60b00 0x100>; |
||||
clocks = <&gateclk 28>; |
||||
status = "okay"; |
||||
|
||||
xor10 { |
||||
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
}; |
||||
xor11 { |
||||
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
dmacap,memset; |
||||
}; |
||||
}; |
||||
|
||||
eth0: ethernet@70000 { |
||||
compatible = "marvell,armada-370-neta"; |
||||
reg = <0x70000 0x4000>; |
||||
interrupts-extended = <&mpic 8>; |
||||
clocks = <&gateclk 4>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
mdio: mdio@72004 { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
compatible = "marvell,orion-mdio"; |
||||
reg = <0x72004 0x4>; |
||||
clocks = <&gateclk 4>; |
||||
}; |
||||
|
||||
rtc@a3800 { |
||||
compatible = "marvell,armada-380-rtc"; |
||||
reg = <0xa3800 0x20>, <0x184a0 0x0c>; |
||||
reg-names = "rtc", "rtc-soc"; |
||||
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
||||
}; |
||||
|
||||
sata@a8000 { |
||||
compatible = "marvell,armada-380-ahci"; |
||||
reg = <0xa8000 0x2000>; |
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&gateclk 15>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
sata@e0000 { |
||||
compatible = "marvell,armada-380-ahci"; |
||||
reg = <0xe0000 0x2000>; |
||||
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&gateclk 30>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
coredivclk: clock@e4250 { |
||||
compatible = "marvell,armada-380-corediv-clock"; |
||||
reg = <0xe4250 0xc>; |
||||
#clock-cells = <1>; |
||||
clocks = <&mainpll>; |
||||
clock-output-names = "nand"; |
||||
}; |
||||
|
||||
thermal@e8078 { |
||||
compatible = "marvell,armada380-thermal"; |
||||
reg = <0xe4078 0x4>, <0xe4074 0x4>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
flash@d0000 { |
||||
compatible = "marvell,armada370-nand"; |
||||
reg = <0xd0000 0x54>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&coredivclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
sdhci@d8000 { |
||||
compatible = "marvell,armada-380-sdhci"; |
||||
reg-names = "sdhci", "mbus", "conf-sdio3"; |
||||
reg = <0xd8000 0x1000>, |
||||
<0xdc000 0x100>, |
||||
<0x18454 0x4>; |
||||
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&gateclk 17>; |
||||
mrvl,clk-delay-cycles = <0x1F>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
usb3@f0000 { |
||||
compatible = "marvell,armada-380-xhci"; |
||||
reg = <0xf0000 0x4000>,<0xf4000 0x4000>; |
||||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&gateclk 9>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
usb3@f8000 { |
||||
compatible = "marvell,armada-380-xhci"; |
||||
reg = <0xf8000 0x4000>,<0xfc000 0x4000>; |
||||
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
||||
clocks = <&gateclk 10>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
clocks { |
||||
/* 2 GHz fixed main PLL */ |
||||
mainpll: mainpll { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <1000000000>; |
||||
}; |
||||
|
||||
/* 25 MHz reference crystal */ |
||||
refclk: oscillator { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <25000000>; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,245 @@ |
||||
/* |
||||
* Device Tree file for Marvell Armada XP development board |
||||
* (DB-MV784MP-GP) |
||||
* |
||||
* Copyright (C) 2013-2014 Marvell |
||||
* |
||||
* Lior Amsalem <alior@marvell.com> |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
* |
||||
* Note: this Device Tree assumes that the bootloader has remapped the |
||||
* internal registers to 0xf1000000 (instead of the default |
||||
* 0xd0000000). The 0xf1000000 is the default used by the recent, |
||||
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier |
||||
* boards were delivered with an older version of the bootloader that |
||||
* left internal registers mapped at 0xd0000000. If you are in this |
||||
* situation, you should either update your bootloader (preferred |
||||
* solution) or the below Device Tree should be adjusted. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include "armada-xp-mv78460.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada XP Development Board DB-MV784MP-GP"; |
||||
compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; |
||||
|
||||
chosen { |
||||
stdout-path = "serial0:115200n8"; |
||||
}; |
||||
|
||||
memory { |
||||
device_type = "memory"; |
||||
/* |
||||
* 8 GB of plug-in RAM modules by default.The amount |
||||
* of memory available can be changed by the |
||||
* bootloader according the size of the module |
||||
* actually plugged. However, memory between |
||||
* 0xF0000000 to 0xFFFFFFFF cannot be used, as it is |
||||
* the address range used for I/O (internal registers, |
||||
* MBus windows). |
||||
*/ |
||||
reg = <0x00000000 0x00000000 0x00000000 0xf0000000>, |
||||
<0x00000001 0x00000000 0x00000001 0x00000000>; |
||||
}; |
||||
|
||||
cpus { |
||||
pm_pic { |
||||
ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>, |
||||
<&gpio0 17 GPIO_ACTIVE_LOW>, |
||||
<&gpio0 18 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 |
||||
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 |
||||
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; |
||||
|
||||
devbus-bootcs { |
||||
status = "okay"; |
||||
|
||||
/* Device Bus parameters are required */ |
||||
|
||||
/* Read parameters */ |
||||
devbus,bus-width = <16>; |
||||
devbus,turn-off-ps = <60000>; |
||||
devbus,badr-skew-ps = <0>; |
||||
devbus,acc-first-ps = <124000>; |
||||
devbus,acc-next-ps = <248000>; |
||||
devbus,rd-setup-ps = <0>; |
||||
devbus,rd-hold-ps = <0>; |
||||
|
||||
/* Write parameters */ |
||||
devbus,sync-enable = <0>; |
||||
devbus,wr-high-ps = <60000>; |
||||
devbus,wr-low-ps = <60000>; |
||||
devbus,ale-wr-ps = <60000>; |
||||
|
||||
/* NOR 16 MiB */ |
||||
nor@0 { |
||||
compatible = "cfi-flash"; |
||||
reg = <0 0x1000000>; |
||||
bank-width = <2>; |
||||
}; |
||||
}; |
||||
|
||||
pcie-controller { |
||||
status = "okay"; |
||||
|
||||
/* |
||||
* The 3 slots are physically present as |
||||
* standard PCIe slots on the board. |
||||
*/ |
||||
pcie@1,0 { |
||||
/* Port 0, Lane 0 */ |
||||
status = "okay"; |
||||
}; |
||||
pcie@9,0 { |
||||
/* Port 2, Lane 0 */ |
||||
status = "okay"; |
||||
}; |
||||
pcie@10,0 { |
||||
/* Port 3, Lane 0 */ |
||||
status = "okay"; |
||||
}; |
||||
}; |
||||
|
||||
internal-regs { |
||||
serial@12000 { |
||||
status = "okay"; |
||||
}; |
||||
serial@12100 { |
||||
status = "okay"; |
||||
}; |
||||
serial@12200 { |
||||
status = "okay"; |
||||
}; |
||||
serial@12300 { |
||||
status = "okay"; |
||||
}; |
||||
pinctrl { |
||||
pinctrl-0 = <&pic_pins>; |
||||
pinctrl-names = "default"; |
||||
pic_pins: pic-pins-0 { |
||||
marvell,pins = "mpp16", "mpp17", |
||||
"mpp18"; |
||||
marvell,function = "gpio"; |
||||
}; |
||||
}; |
||||
sata@a0000 { |
||||
nr-ports = <2>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
mdio { |
||||
phy0: ethernet-phy@0 { |
||||
reg = <16>; |
||||
}; |
||||
|
||||
phy1: ethernet-phy@1 { |
||||
reg = <17>; |
||||
}; |
||||
|
||||
phy2: ethernet-phy@2 { |
||||
reg = <18>; |
||||
}; |
||||
|
||||
phy3: ethernet-phy@3 { |
||||
reg = <19>; |
||||
}; |
||||
}; |
||||
|
||||
ethernet@70000 { |
||||
status = "okay"; |
||||
phy = <&phy0>; |
||||
phy-mode = "qsgmii"; |
||||
}; |
||||
ethernet@74000 { |
||||
status = "okay"; |
||||
phy = <&phy1>; |
||||
phy-mode = "qsgmii"; |
||||
}; |
||||
ethernet@30000 { |
||||
status = "okay"; |
||||
phy = <&phy2>; |
||||
phy-mode = "qsgmii"; |
||||
}; |
||||
ethernet@34000 { |
||||
status = "okay"; |
||||
phy = <&phy3>; |
||||
phy-mode = "qsgmii"; |
||||
}; |
||||
|
||||
/* Front-side USB slot */ |
||||
usb@50000 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
/* Back-side USB slot */ |
||||
usb@51000 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
spi0: spi@10600 { |
||||
status = "okay"; |
||||
|
||||
spi-flash@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "n25q128a13", "jedec,spi-nor"; |
||||
reg = <0>; /* Chip select 0 */ |
||||
spi-max-frequency = <108000000>; |
||||
}; |
||||
}; |
||||
|
||||
nand@d0000 { |
||||
status = "okay"; |
||||
num-cs = <1>; |
||||
marvell,nand-keep-config; |
||||
marvell,nand-enable-arbiter; |
||||
nand-on-flash-bbt; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,231 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada XP family SoC |
||||
* |
||||
* Copyright (C) 2012 Marvell |
||||
* |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
* |
||||
* Contains definitions specific to the Armada XP MV78230 SoC that are not |
||||
* common to all Armada XP SoCs. |
||||
*/ |
||||
|
||||
#include "armada-xp.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada XP MV78230 SoC"; |
||||
compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; |
||||
|
||||
aliases { |
||||
gpio0 = &gpio0; |
||||
gpio1 = &gpio1; |
||||
}; |
||||
|
||||
cpus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
enable-method = "marvell,armada-xp-smp"; |
||||
|
||||
cpu@0 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <0>; |
||||
clocks = <&cpuclk 0>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
|
||||
cpu@1 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <1>; |
||||
clocks = <&cpuclk 1>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
/* |
||||
* MV78230 has 2 PCIe units Gen2.0: One unit can be |
||||
* configured as x4 or quad x1 lanes. One unit is |
||||
* x1 only. |
||||
*/ |
||||
pcie-controller { |
||||
compatible = "marvell,armada-xp-pcie"; |
||||
status = "disabled"; |
||||
device_type = "pci"; |
||||
|
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
|
||||
msi-parent = <&mpic>; |
||||
bus-range = <0x00 0xff>; |
||||
|
||||
ranges = |
||||
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ |
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ |
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ |
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ |
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ |
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ |
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ |
||||
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ |
||||
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ |
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ |
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ |
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ |
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ |
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; |
||||
|
||||
pcie@1,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
||||
reg = <0x0800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 58>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 5>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@2,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; |
||||
reg = <0x1000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 59>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <1>; |
||||
clocks = <&gateclk 6>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@3,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; |
||||
reg = <0x1800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 60>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <2>; |
||||
clocks = <&gateclk 7>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@4,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; |
||||
reg = <0x2000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 61>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <3>; |
||||
clocks = <&gateclk 8>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@5,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
||||
reg = <0x2800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 62>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 9>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
|
||||
internal-regs { |
||||
gpio0: gpio@18100 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18100 0x40>; |
||||
ngpios = <32>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <82>, <83>, <84>, <85>; |
||||
}; |
||||
|
||||
gpio1: gpio@18140 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18140 0x40>; |
||||
ngpios = <17>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <87>, <88>, <89>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
compatible = "marvell,mv78230-pinctrl"; |
||||
}; |
||||
@ -0,0 +1,333 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada XP family SoC |
||||
* |
||||
* Copyright (C) 2012 Marvell |
||||
* |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
* |
||||
* Contains definitions specific to the Armada XP MV78260 SoC that are not |
||||
* common to all Armada XP SoCs. |
||||
*/ |
||||
|
||||
#include "armada-xp.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada XP MV78260 SoC"; |
||||
compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; |
||||
|
||||
aliases { |
||||
gpio0 = &gpio0; |
||||
gpio1 = &gpio1; |
||||
gpio2 = &gpio2; |
||||
}; |
||||
|
||||
cpus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
enable-method = "marvell,armada-xp-smp"; |
||||
|
||||
cpu@0 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <0>; |
||||
clocks = <&cpuclk 0>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
|
||||
cpu@1 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <1>; |
||||
clocks = <&cpuclk 1>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
/* |
||||
* MV78260 has 3 PCIe units Gen2.0: Two units can be |
||||
* configured as x4 or quad x1 lanes. One unit is |
||||
* x4 only. |
||||
*/ |
||||
pcie-controller { |
||||
compatible = "marvell,armada-xp-pcie"; |
||||
status = "disabled"; |
||||
device_type = "pci"; |
||||
|
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
|
||||
msi-parent = <&mpic>; |
||||
bus-range = <0x00 0xff>; |
||||
|
||||
ranges = |
||||
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ |
||||
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ |
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ |
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ |
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ |
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ |
||||
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ |
||||
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ |
||||
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ |
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ |
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ |
||||
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ |
||||
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ |
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ |
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ |
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ |
||||
|
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ |
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ |
||||
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ |
||||
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ |
||||
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ |
||||
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ |
||||
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ |
||||
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ |
||||
|
||||
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ |
||||
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; |
||||
|
||||
pcie@1,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
||||
reg = <0x0800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 58>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 5>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@2,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; |
||||
reg = <0x1000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 59>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <1>; |
||||
clocks = <&gateclk 6>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@3,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; |
||||
reg = <0x1800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 60>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <2>; |
||||
clocks = <&gateclk 7>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@4,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; |
||||
reg = <0x2000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 61>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <3>; |
||||
clocks = <&gateclk 8>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@5,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
||||
reg = <0x2800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 62>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 9>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@6,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; |
||||
reg = <0x3000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x6 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 63>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <1>; |
||||
clocks = <&gateclk 10>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@7,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; |
||||
reg = <0x3800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x7 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 64>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <2>; |
||||
clocks = <&gateclk 11>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@8,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; |
||||
reg = <0x4000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x8 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 65>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <3>; |
||||
clocks = <&gateclk 12>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@9,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; |
||||
reg = <0x4800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x9 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 99>; |
||||
marvell,pcie-port = <2>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 26>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
|
||||
internal-regs { |
||||
gpio0: gpio@18100 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18100 0x40>; |
||||
ngpios = <32>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <82>, <83>, <84>, <85>; |
||||
}; |
||||
|
||||
gpio1: gpio@18140 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18140 0x40>; |
||||
ngpios = <32>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <87>, <88>, <89>, <90>; |
||||
}; |
||||
|
||||
gpio2: gpio@18180 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18180 0x40>; |
||||
ngpios = <3>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <91>; |
||||
}; |
||||
|
||||
eth3: ethernet@34000 { |
||||
compatible = "marvell,armada-xp-neta"; |
||||
reg = <0x34000 0x4000>; |
||||
interrupts = <14>; |
||||
clocks = <&gateclk 1>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
compatible = "marvell,mv78260-pinctrl"; |
||||
}; |
||||
@ -0,0 +1,371 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada XP family SoC |
||||
* |
||||
* Copyright (C) 2012 Marvell |
||||
* |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
* |
||||
* Contains definitions specific to the Armada XP MV78460 SoC that are not |
||||
* common to all Armada XP SoCs. |
||||
*/ |
||||
|
||||
#include "armada-xp.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada XP MV78460 SoC"; |
||||
compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; |
||||
|
||||
aliases { |
||||
gpio0 = &gpio0; |
||||
gpio1 = &gpio1; |
||||
gpio2 = &gpio2; |
||||
}; |
||||
|
||||
|
||||
cpus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
enable-method = "marvell,armada-xp-smp"; |
||||
|
||||
cpu@0 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <0>; |
||||
clocks = <&cpuclk 0>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
|
||||
cpu@1 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <1>; |
||||
clocks = <&cpuclk 1>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
|
||||
cpu@2 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <2>; |
||||
clocks = <&cpuclk 2>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
|
||||
cpu@3 { |
||||
device_type = "cpu"; |
||||
compatible = "marvell,sheeva-v7"; |
||||
reg = <3>; |
||||
clocks = <&cpuclk 3>; |
||||
clock-latency = <1000000>; |
||||
}; |
||||
}; |
||||
|
||||
soc { |
||||
/* |
||||
* MV78460 has 4 PCIe units Gen2.0: Two units can be |
||||
* configured as x4 or quad x1 lanes. Two units are |
||||
* x4/x1. |
||||
*/ |
||||
pcie-controller { |
||||
compatible = "marvell,armada-xp-pcie"; |
||||
status = "disabled"; |
||||
device_type = "pci"; |
||||
|
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
|
||||
msi-parent = <&mpic>; |
||||
bus-range = <0x00 0xff>; |
||||
|
||||
ranges = |
||||
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ |
||||
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ |
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ |
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ |
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ |
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ |
||||
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ |
||||
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ |
||||
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ |
||||
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ |
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ |
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ |
||||
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ |
||||
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ |
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ |
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ |
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ |
||||
|
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ |
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ |
||||
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ |
||||
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ |
||||
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ |
||||
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ |
||||
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ |
||||
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ |
||||
|
||||
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ |
||||
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ |
||||
|
||||
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ |
||||
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; |
||||
|
||||
pcie@1,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
||||
reg = <0x0800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x1 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 58>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 5>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@2,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; |
||||
reg = <0x1000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 59>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <1>; |
||||
clocks = <&gateclk 6>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@3,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; |
||||
reg = <0x1800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x3 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 60>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <2>; |
||||
clocks = <&gateclk 7>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@4,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; |
||||
reg = <0x2000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x4 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 61>; |
||||
marvell,pcie-port = <0>; |
||||
marvell,pcie-lane = <3>; |
||||
clocks = <&gateclk 8>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@5,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; |
||||
reg = <0x2800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 62>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 9>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@6,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; |
||||
reg = <0x3000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x6 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 63>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <1>; |
||||
clocks = <&gateclk 10>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@7,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; |
||||
reg = <0x3800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x7 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 64>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <2>; |
||||
clocks = <&gateclk 11>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@8,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; |
||||
reg = <0x4000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x8 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 65>; |
||||
marvell,pcie-port = <1>; |
||||
marvell,pcie-lane = <3>; |
||||
clocks = <&gateclk 12>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@9,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; |
||||
reg = <0x4800 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 |
||||
0x81000000 0 0 0x81000000 0x9 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 99>; |
||||
marvell,pcie-port = <2>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 26>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
pcie@10,0 { |
||||
device_type = "pci"; |
||||
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; |
||||
reg = <0x5000 0 0 0 0>; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
#interrupt-cells = <1>; |
||||
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 |
||||
0x81000000 0 0 0x81000000 0xa 0 1 0>; |
||||
interrupt-map-mask = <0 0 0 0>; |
||||
interrupt-map = <0 0 0 0 &mpic 103>; |
||||
marvell,pcie-port = <3>; |
||||
marvell,pcie-lane = <0>; |
||||
clocks = <&gateclk 27>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
|
||||
internal-regs { |
||||
gpio0: gpio@18100 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18100 0x40>; |
||||
ngpios = <32>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <82>, <83>, <84>, <85>; |
||||
}; |
||||
|
||||
gpio1: gpio@18140 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18140 0x40>; |
||||
ngpios = <32>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <87>, <88>, <89>, <90>; |
||||
}; |
||||
|
||||
gpio2: gpio@18180 { |
||||
compatible = "marvell,orion-gpio"; |
||||
reg = <0x18180 0x40>; |
||||
ngpios = <3>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <2>; |
||||
interrupts = <91>; |
||||
}; |
||||
|
||||
eth3: ethernet@34000 { |
||||
compatible = "marvell,armada-xp-neta"; |
||||
reg = <0x34000 0x4000>; |
||||
interrupts = <14>; |
||||
clocks = <&gateclk 1>; |
||||
status = "disabled"; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
compatible = "marvell,mv78460-pinctrl"; |
||||
}; |
||||
@ -0,0 +1,320 @@ |
||||
/* |
||||
* Device Tree Include file for Marvell Armada XP family SoC |
||||
* |
||||
* Copyright (C) 2012 Marvell |
||||
* |
||||
* Lior Amsalem <alior@marvell.com> |
||||
* Gregory CLEMENT <gregory.clement@free-electrons.com> |
||||
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||||
* Ben Dooks <ben.dooks@codethink.co.uk> |
||||
* |
||||
* This file is dual-licensed: you can use it either under the terms |
||||
* of the GPL or the X11 license, at your option. Note that this dual |
||||
* licensing only applies to this file, and not this project as a |
||||
* whole. |
||||
* |
||||
* a) This file is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of the |
||||
* License, or (at your option) any later version. |
||||
* |
||||
* This file is distributed in the hope that it will be useful |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* Or, alternatively |
||||
* |
||||
* b) Permission is hereby granted, free of charge, to any person |
||||
* obtaining a copy of this software and associated documentation |
||||
* files (the "Software"), to deal in the Software without |
||||
* restriction, including without limitation the rights to use |
||||
* copy, modify, merge, publish, distribute, sublicense, and/or |
||||
* sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following |
||||
* conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be |
||||
* included in all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||||
* OTHER DEALINGS IN THE SOFTWARE. |
||||
* |
||||
* Contains definitions specific to the Armada XP SoC that are not |
||||
* common to all Armada SoCs. |
||||
*/ |
||||
|
||||
#include "armada-370-xp.dtsi" |
||||
|
||||
/ { |
||||
model = "Marvell Armada XP family SoC"; |
||||
compatible = "marvell,armadaxp", "marvell,armada-370-xp"; |
||||
|
||||
aliases { |
||||
serial2 = &uart2; |
||||
serial3 = &uart3; |
||||
}; |
||||
|
||||
soc { |
||||
compatible = "marvell,armadaxp-mbus", "simple-bus"; |
||||
|
||||
bootrom { |
||||
compatible = "marvell,bootrom"; |
||||
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; |
||||
}; |
||||
|
||||
internal-regs { |
||||
sdramc@1400 { |
||||
compatible = "marvell,armada-xp-sdram-controller"; |
||||
reg = <0x1400 0x500>; |
||||
}; |
||||
|
||||
L2: l2-cache { |
||||
compatible = "marvell,aurora-system-cache"; |
||||
reg = <0x08000 0x1000>; |
||||
cache-id-part = <0x100>; |
||||
cache-level = <2>; |
||||
cache-unified; |
||||
wt-override; |
||||
}; |
||||
|
||||
spi0: spi@10600 { |
||||
compatible = "marvell,armada-xp-spi", |
||||
"marvell,orion-spi"; |
||||
pinctrl-0 = <&spi0_pins>; |
||||
pinctrl-names = "default"; |
||||
}; |
||||
|
||||
spi1: spi@10680 { |
||||
compatible = "marvell,armada-xp-spi", |
||||
"marvell,orion-spi"; |
||||
}; |
||||
|
||||
|
||||
i2c0: i2c@11000 { |
||||
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; |
||||
reg = <0x11000 0x100>; |
||||
}; |
||||
|
||||
i2c1: i2c@11100 { |
||||
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; |
||||
reg = <0x11100 0x100>; |
||||
}; |
||||
|
||||
uart2: serial@12200 { |
||||
compatible = "snps,dw-apb-uart"; |
||||
pinctrl-0 = <&uart2_pins>; |
||||
pinctrl-names = "default"; |
||||
reg = <0x12200 0x100>; |
||||
reg-shift = <2>; |
||||
interrupts = <43>; |
||||
reg-io-width = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
uart3: serial@12300 { |
||||
compatible = "snps,dw-apb-uart"; |
||||
pinctrl-0 = <&uart3_pins>; |
||||
pinctrl-names = "default"; |
||||
reg = <0x12300 0x100>; |
||||
reg-shift = <2>; |
||||
interrupts = <44>; |
||||
reg-io-width = <1>; |
||||
clocks = <&coreclk 0>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
system-controller@18200 { |
||||
compatible = "marvell,armada-370-xp-system-controller"; |
||||
reg = <0x18200 0x500>; |
||||
}; |
||||
|
||||
gateclk: clock-gating-control@18220 { |
||||
compatible = "marvell,armada-xp-gating-clock"; |
||||
reg = <0x18220 0x4>; |
||||
clocks = <&coreclk 0>; |
||||
#clock-cells = <1>; |
||||
}; |
||||
|
||||
coreclk: mvebu-sar@18230 { |
||||
compatible = "marvell,armada-xp-core-clock"; |
||||
reg = <0x18230 0x08>; |
||||
#clock-cells = <1>; |
||||
}; |
||||
|
||||
thermal@182b0 { |
||||
compatible = "marvell,armadaxp-thermal"; |
||||
reg = <0x182b0 0x4 |
||||
0x184d0 0x4>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
cpuclk: clock-complex@18700 { |
||||
#clock-cells = <1>; |
||||
compatible = "marvell,armada-xp-cpu-clock"; |
||||
reg = <0x18700 0x24>, <0x1c054 0x10>; |
||||
clocks = <&coreclk 1>; |
||||
}; |
||||
|
||||
interrupt-controller@20a00 { |
||||
reg = <0x20a00 0x2d0>, <0x21070 0x58>; |
||||
}; |
||||
|
||||
timer@20300 { |
||||
compatible = "marvell,armada-xp-timer"; |
||||
clocks = <&coreclk 2>, <&refclk>; |
||||
clock-names = "nbclk", "fixed"; |
||||
}; |
||||
|
||||
watchdog@20300 { |
||||
compatible = "marvell,armada-xp-wdt"; |
||||
clocks = <&coreclk 2>, <&refclk>; |
||||
clock-names = "nbclk", "fixed"; |
||||
}; |
||||
|
||||
cpurst@20800 { |
||||
compatible = "marvell,armada-370-cpu-reset"; |
||||
reg = <0x20800 0x20>; |
||||
}; |
||||
|
||||
eth2: ethernet@30000 { |
||||
compatible = "marvell,armada-xp-neta"; |
||||
reg = <0x30000 0x4000>; |
||||
interrupts = <12>; |
||||
clocks = <&gateclk 2>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
usb@50000 { |
||||
clocks = <&gateclk 18>; |
||||
}; |
||||
|
||||
usb@51000 { |
||||
clocks = <&gateclk 19>; |
||||
}; |
||||
|
||||
usb@52000 { |
||||
compatible = "marvell,orion-ehci"; |
||||
reg = <0x52000 0x500>; |
||||
interrupts = <47>; |
||||
clocks = <&gateclk 20>; |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
xor@60900 { |
||||
compatible = "marvell,orion-xor"; |
||||
reg = <0x60900 0x100 |
||||
0x60b00 0x100>; |
||||
clocks = <&gateclk 22>; |
||||
status = "okay"; |
||||
|
||||
xor10 { |
||||
interrupts = <51>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
}; |
||||
xor11 { |
||||
interrupts = <52>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
dmacap,memset; |
||||
}; |
||||
}; |
||||
|
||||
ethernet@70000 { |
||||
compatible = "marvell,armada-xp-neta"; |
||||
}; |
||||
|
||||
ethernet@74000 { |
||||
compatible = "marvell,armada-xp-neta"; |
||||
}; |
||||
|
||||
xor@f0900 { |
||||
compatible = "marvell,orion-xor"; |
||||
reg = <0xF0900 0x100 |
||||
0xF0B00 0x100>; |
||||
clocks = <&gateclk 28>; |
||||
status = "okay"; |
||||
|
||||
xor00 { |
||||
interrupts = <94>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
}; |
||||
xor01 { |
||||
interrupts = <95>; |
||||
dmacap,memcpy; |
||||
dmacap,xor; |
||||
dmacap,memset; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
clocks { |
||||
/* 25 MHz reference crystal */ |
||||
refclk: oscillator { |
||||
compatible = "fixed-clock"; |
||||
#clock-cells = <0>; |
||||
clock-frequency = <25000000>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
ge0_gmii_pins: ge0-gmii-pins { |
||||
marvell,pins = |
||||
"mpp0", "mpp1", "mpp2", "mpp3", |
||||
"mpp4", "mpp5", "mpp6", "mpp7", |
||||
"mpp8", "mpp9", "mpp10", "mpp11", |
||||
"mpp12", "mpp13", "mpp14", "mpp15", |
||||
"mpp16", "mpp17", "mpp18", "mpp19", |
||||
"mpp20", "mpp21", "mpp22", "mpp23"; |
||||
marvell,function = "ge0"; |
||||
}; |
||||
|
||||
ge0_rgmii_pins: ge0-rgmii-pins { |
||||
marvell,pins = |
||||
"mpp0", "mpp1", "mpp2", "mpp3", |
||||
"mpp4", "mpp5", "mpp6", "mpp7", |
||||
"mpp8", "mpp9", "mpp10", "mpp11"; |
||||
marvell,function = "ge0"; |
||||
}; |
||||
|
||||
ge1_rgmii_pins: ge1-rgmii-pins { |
||||
marvell,pins = |
||||
"mpp12", "mpp13", "mpp14", "mpp15", |
||||
"mpp16", "mpp17", "mpp18", "mpp19", |
||||
"mpp20", "mpp21", "mpp22", "mpp23"; |
||||
marvell,function = "ge1"; |
||||
}; |
||||
|
||||
sdio_pins: sdio-pins { |
||||
marvell,pins = "mpp30", "mpp31", "mpp32", |
||||
"mpp33", "mpp34", "mpp35"; |
||||
marvell,function = "sd0"; |
||||
}; |
||||
|
||||
spi0_pins: spi0-pins { |
||||
marvell,pins = "mpp36", "mpp37", |
||||
"mpp38", "mpp39"; |
||||
marvell,function = "spi0"; |
||||
}; |
||||
|
||||
uart2_pins: uart2-pins { |
||||
marvell,pins = "mpp42", "mpp43"; |
||||
marvell,function = "uart2"; |
||||
}; |
||||
|
||||
uart3_pins: uart3-pins { |
||||
marvell,pins = "mpp44", "mpp45"; |
||||
marvell,function = "uart3"; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,31 @@ |
||||
if ARCH_MVEBU |
||||
|
||||
choice |
||||
prompt "Marvell MVEBU (Armada XP/38x) board select" |
||||
optional |
||||
|
||||
config TARGET_DB_88F6820_GP |
||||
bool "Support DB-88F6820-GP" |
||||
|
||||
config TARGET_DB_MV784MP_GP |
||||
bool "Support db-mv784mp-gp" |
||||
|
||||
config TARGET_MAXBCM |
||||
bool "Support maxbcm" |
||||
|
||||
endchoice |
||||
|
||||
config SYS_SOC |
||||
default "mvebu" |
||||
|
||||
config MVEBU_BOOTROM_UARTBOOT |
||||
bool "Use kwboot to boot via BootROM xmodem protocol" |
||||
help |
||||
This option provides support for booting via the Marvell |
||||
xmodem protocol, used by the kwboot tool. |
||||
|
||||
Please don't forget to configure the boot device in |
||||
the board specific kwbimage.cfg file this way: |
||||
BOOT_FROM uart |
||||
|
||||
endif |
||||
@ -1,7 +1,14 @@ |
||||
CONFIG_ARM=y |
||||
CONFIG_ARCH_MVEBU=y |
||||
CONFIG_TARGET_DB_88F6820_GP=y |
||||
CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp" |
||||
CONFIG_SPL=y |
||||
# CONFIG_CMD_IMLS is not set |
||||
# CONFIG_CMD_FLASH is not set |
||||
CONFIG_CMD_USB=y |
||||
# CONFIG_CMD_SETEXPR is not set |
||||
CONFIG_SPI_FLASH=y |
||||
CONFIG_USB=y |
||||
CONFIG_DM_USB=y |
||||
CONFIG_USB_EHCI_HCD=y |
||||
CONFIG_USB_STORAGE=y |
||||
|
||||
@ -1,8 +1,15 @@ |
||||
CONFIG_ARM=y |
||||
CONFIG_ARCH_MVEBU=y |
||||
CONFIG_TARGET_DB_MV784MP_GP=y |
||||
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp" |
||||
CONFIG_SPL=y |
||||
# CONFIG_CMD_IMLS is not set |
||||
# CONFIG_CMD_FLASH is not set |
||||
CONFIG_CMD_USB=y |
||||
# CONFIG_CMD_SETEXPR is not set |
||||
CONFIG_NAND_PXA3XX=y |
||||
CONFIG_SPI_FLASH=y |
||||
CONFIG_USB=y |
||||
CONFIG_DM_USB=y |
||||
CONFIG_USB_EHCI_HCD=y |
||||
CONFIG_USB_STORAGE=y |
||||
|
||||
Loading…
Reference in new issue